An object file should not be linked into multiple modules and/or
vmlinux:
scripts/Makefile.build:221: /home/arnd/arm-soc/sound/soc/loongson/Makefile: loongson_i2s.o is added to multiple modules: snd-soc-loongson-i2s-pci snd-soc-loongson-i2s-plat
Change this one to make it a library module with two exported symbols
that will work in any configuration.
Fixes: ba4c5fad598c ("ASoC: loongson: Add I2S controller driver as platform device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20241015150958.2294155-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Fixes the below if kernel config disable PCI support:
sound/soc/loongson/loongson_i2s_pci.c:157:1: warning: data definition has no type or storage class
157 | module_pci_driver(loongson_i2s_driver);
| ^~~~~~~~~~~~~~~~~
sound/soc/loongson/loongson_i2s_pci.c:157:1: error: type defaults to 'int' in declaration of 'module_pci_driver' [-Wimplicit-int]
sound/soc/loongson/loongson_i2s_pci.c:157:1: error: parameter names (without types) in function declaration [-Wdeclaration-missing-parameter-type]
sound/soc/loongson/loongson_i2s_pci.c:149:26: warning: 'loongson_i2s_driver' defined but not used [-Wunused-variable]
149 | static struct pci_driver loongson_i2s_driver = {
| ^~~~~~~~~~~~~~~~~~~
Add the appropriate Kconfig dependency.
Fixes: ba4c5fad598c ("ASoC: loongson: Add I2S controller driver as platform device")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410101647.o1lI37ou-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202410101439.Tfn5aT6i-lkp@intel.com/
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/20241012095840.965087-1-zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Add a new multi-chan IP core (0x12) support which is used in Loongson-
2K3000/Loongson-3B6000M. Compared with the 0x10 core, the new 0x12 core
reduces channel numbers from 8 to 4, but checksum is supported for all
channels.
Add a "multichan" flag to loongson_data, so that we can simply use a
"if (ld->multichan)" condition rather than the complicated condition
"if (ld->loongson_id == DWMAC_CORE_MULTICHAN_V1 || ld->loongson_id ==
DWMAC_CORE_MULTICHAN_V2)".
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Henry Chen <chenx97@aosc.io>
Tested-by: Biao Dong <dongbiao@loongson.cn>
Signed-off-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Link: https://patch.msgid.link/20250424072209.3134762-3-chenhuacai@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
arch_uprobe_skip_sstep() returns true if instruction was emulated, that
is to say, there is no need to single step for the emulated instructions.
regs->csr_era will point to the destination address directly after the
exception, so the resume_era related code is redundant, just remove them.
Cc: stable@vger.kernel.org
Fixes: 19bc6cb64092 ("LoongArch: Add uprobes support")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
When executing the "perf probe" and "perf stat" test cases about some
cryptographic algorithm, the output shows that "Trace/breakpoint trap".
This is because it uses the software singlestep breakpoint for uprobes
on LoongArch, and no need to use the hardware singlestep. So just remove
the related function call to user_{en,dis}able_single_step() for uprobes
on LoongArch.
How to reproduce:
Please make sure CONFIG_UPROBE_EVENTS is set and openssl supports sm2
algorithm, then execute the following command.
cd tools/perf && make
./perf probe -x /usr/lib64/libcrypto.so BN_mod_mul_montgomery
./perf stat -e probe_libcrypto:BN_mod_mul_montgomery openssl speed sm2
Cc: stable@vger.kernel.org
Fixes: 19bc6cb64092 ("LoongArch: Add uprobes support")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Save and restore CSR.CNTC for hibernation which is similar to suspend.
For host this is unnecessary because sched clock is ensured continuous,
but for kvm guest sched clock isn't enough because rdtime.d should also
be continuous.
Host::rdtime.d = Host::CSR.CNTC + counter
Guest::rdtime.d = Host::CSR.CNTC + Host::CSR.GCNTC + Guest::CSR.CNTC + counter
so,
Guest::rdtime.d = Host::rdtime.d + Host::CSR.GCNTC + Guest::CSR.CNTC
To ensure Guest::rdtime.d continuous, Host::rdtime.d should be at first
continuous, while Host::CSR.GCNTC / Guest::CSR.CNTC is maintained by KVM.
Cc: stable@vger.kernel.org
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Now arch_cpu_idle() is annotated with __cpuidle which means it is in
the .cpuidle.text section, but __arch_cpu_idle() isn't. Thus, fix the
missing .cpuidle.text section assignment for __arch_cpu_idle() in order
to correct backtracing with nmi_backtrace().
The principle is similar to the commit 97c8580e85cf81c ("MIPS: Annotate
cpu_wait implementations with __cpuidle")
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Fix MAX_REG_OFFSET calculation, make it point to the last register
in 'struct pt_regs' and not to the marker itself, which could allow
regs_get_register() to return an invalid offset.
Cc: stable@vger.kernel.org
Fixes: 803b0fc5c3f2baa6e5 ("LoongArch: Add process management")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
When CONFIG_PREEMPT_COUNT is not configured (i.e. CONFIG_PREEMPT_NONE/
CONFIG_PREEMPT_VOLUNTARY), preempt_disable() / preempt_enable() merely
acts as a barrier(). However, in these cases cond_resched() can still
trigger a context switch and modify the CSR.EUEN, resulting in do_fpu()
exception being activated within the kernel-fpu critical sections, as
demonstrated in the following path:
dcn32_calculate_wm_and_dlg()
DC_FP_START()
dcn32_calculate_wm_and_dlg_fpu()
dcn32_find_dummy_latency_index_for_fw_based_mclk_switch()
dcn32_internal_validate_bw()
dcn32_enable_phantom_stream()
dc_create_stream_for_sink()
kzalloc(GFP_KERNEL)
__kmem_cache_alloc_node()
__cond_resched()
DC_FP_END()
This patch is similar to commit d02198550423a0b (x86/fpu: Improve crypto
performance by making kernel-mode FPU reliably usable in softirqs). It
uses local_bh_disable() instead of preempt_disable() for non-RT kernels
so it can avoid the cond_resched() issue, and also extend the kernel-fpu
application scenarios to the softirq context.
Cc: stable@vger.kernel.org
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
LoongArch's huge_pte_offset() currently returns a pointer to a PMD slot
even if the underlying entry points to invalid_pte_table (indicating no
mapping). Callers like smaps_hugetlb_range() fetch this invalid entry
value (the address of invalid_pte_table) via this pointer.
The generic is_swap_pte() check then incorrectly identifies this address
as a swap entry on LoongArch, because it satisfies the "!pte_present()
&& !pte_none()" conditions. This misinterpretation, combined with a
coincidental match by is_migration_entry() on the address bits, leads to
kernel crashes in pfn_swap_entry_to_page().
Fix this at the architecture level by modifying huge_pte_offset() to
check the PMD entry's content using pmd_none() before returning. If the
entry is invalid (i.e., it points to invalid_pte_table), return NULL
instead of the pointer to the slot.
Cc: stable@vger.kernel.org
Acked-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Like the other relevant symbols, export some fp, lsx, lasx and lbt
assembly symbols and put the function declarations in header files
rather than source files.
While at it, use "asmlinkage" for the other existing C prototypes
of assembly functions and also do not use the "extern" keyword with
function declarations according to the document coding-style.rst.
Cc: stable@vger.kernel.org # 6.6+
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Currently, interrupts need to be disabled before single-step mode is
set, it requires that CSR_PRMD_PIE be cleared in save_local_irqflag()
which is called by setup_singlestep(), this is reasonable.
But in the first kprobe breakpoint exception, if the irq is enabled at
the beginning of do_bp(), it will not be disabled at the end of do_bp()
due to the CSR_PRMD_PIE has been cleared in save_local_irqflag(). So for
this case, it may corrupt exception context when restoring the exception
after do_bp() in handle_bp(), this is not reasonable.
In order to restore exception safely in handle_bp(), it needs to ensure
the irq is disabled at the end of do_bp(), so just add a local variable
to record the original interrupt status in the parent context, then use
it as the check condition to enable and disable irq in do_bp().
While at it, do the similar thing for other do_xyz() exception handlers
to make them more robust.
Fixes: 6d4cc40fb5f5 ("LoongArch: Add kprobes support")
Suggested-by: Jinyang He <hejinyang@loongson.cn>
Suggested-by: Huacai Chen <chenhuacai@loongson.cn>
Co-developed-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
In the current code, the definition of regs_irqs_disabled() is actually
"!(regs->csr_prmd & CSR_CRMD_IE)" because arch_irqs_disabled_flags() is
defined as "!(flags & CSR_CRMD_IE)", it looks a little strange.
Define regs_irqs_disabled() as !(regs->csr_prmd & CSR_PRMD_PIE) directly
to make it more clear, no functional change.
While at it, the return value of regs_irqs_disabled() is true or false,
so change its type to reflect that and also make it always inline.
Fixes: 803b0fc5c3f2 ("LoongArch: Add process management")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
As of commit dce44566192e ("mm/memtest: add ARCH_USE_MEMTEST"),
architectures must select ARCH_USE_MEMTESET to enable CONFIG_MEMTEST.
Commit 628c3bb40e9a ("LoongArch: Add boot and setup routines") added
support for early_memtest but did not select ARCH_USE_MEMTESET.
Fixes: 628c3bb40e9a ("LoongArch: Add boot and setup routines")
Tested-by: Erpeng Xu <xuerpeng@uniontech.com>
Tested-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
1.Fix the issue of the SD card crashing due to repeated plugging and unplugging.
2.add init-polarity to support setup init pwm status
3.loongson2_thermal: update temperature formula
4.Fix alert/critical temperature to 75/105
5.Add alientek-2k300 support
The verifier test `calls: div by 0 in subprog` triggers a panic at the
ld.bu instruction. The ld.bu insn is trying to load byte from memory
address returned by the subprog. The subprog actually set the correct
address at the a5 register (dedicated register for BPF return values).
But at commit 73c359d1d356 ("LoongArch: BPF: Sign-extend return values")
we also sign extended a5 to the a0 register (return value in LoongArch).
For function call insn, we later propagate the a0 register back to a5
register. This is right for native calls but wrong for bpf2bpf calls
which expect zero-extended return value in a5 register. So only move a0
to a5 for native calls (i.e. non-BPF_PSEUDO_CALL).
Cc: stable@vger.kernel.org
Fixes: 73c359d1d356 ("LoongArch: BPF: Sign-extend return values")
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Vincent reported that running XDP synproxy program on LoongArch results
in the following error:
JIT doesn't support bpf-to-bpf calls
With dmesg:
multi-func JIT bug 1391 != 1390
The root cause is that verifier will refill the imm with the correct
addresses of bpf_calls for BPF_PSEUDO_FUNC instructions and then run
the last pass of JIT. So we generate different JIT code for the same
instruction in two passes (one for placeholder and the other for the
real address). Let's use move_addr() instead.
See commit 64f50f6575721ef0 ("LoongArch, bpf: Use 4 instructions for
function address in JIT") for a similar fix.
Cc: stable@vger.kernel.org
Fixes: 69c087ba6225 ("bpf: Add bpf_for_each_map_elem() helper")
Fixes: bb035ef0cc91 ("LoongArch: BPF: Support mixing bpf2bpf and tailcalls")
Reported-by: Vincent Li <vincent.mc.li@gmail.com>
Tested-by: Vincent Li <vincent.mc.li@gmail.com>
Closes: https://lore.kernel.org/loongarch/CAK3+h2yfM9FTNiXvEQBkvtuoJrvzmN4c_NZsFXqEk4Cj1tsBNA@mail.gmail.com/T/#u
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The arch_kgdb_breakpoint() function defines the kgdb_breakinst symbol
using inline assembly.
1. There's a potential issue where the compiler might inline
arch_kgdb_breakpoint(), which would then define the kgdb_breakinst
symbol multiple times, leading to a linker error.
To prevent this, declare arch_kgdb_breakpoint() as noinline.
Fix follow error with LLVM-19 *only* when LTO_CLANG_FULL:
LD vmlinux.o
ld.lld-19: error: ld-temp.o <inline asm>:3:1: symbol 'kgdb_breakinst' is already defined
kgdb_breakinst: break 2
^
2. Remove "nop" in the inline assembly because it's meaningless for
LoongArch here.
3. Add "STACK_FRAME_NON_STANDARD" for arch_kgdb_breakpoint() to avoid
the objtool warning.
Fixes: e14dd076964e ("LoongArch: Add basic KGDB & KDB support")
Tested-by: Binbin Zhou <zhoubinbin@loongson.cn>
Co-developed-by: Winston Wen <wentao@uniontech.com>
Signed-off-by: Winston Wen <wentao@uniontech.com>
Co-developed-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Add missing of_node_put() to properly handle the reference count of the
device node obtained from of_get_cpu_node().
Fixes: 44a01f1f726a ("LoongArch: Parsing CPU-related information from DTS")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
ARCH_DMA_MINALIGN is 1 by default, but some LoongArch-specific devices
(such as APBDMA) require 16 bytes alignment. When the data buffer length
is too small, the hardware may make an error writing cacheline. Thus, it
is dangerous to allocate a small memory buffer for DMA. It's always safe
to define ARCH_DMA_MINALIGN as L1_CACHE_BYTES but unnecessary (kmalloc()
need small memory objects). Therefore, just increase it to 16.
Cc: stable@vger.kernel.org
Tested-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Begin with Loongson-3C6000, the number of PCI host can be as many as
8 for multi-chip machines, and this number should be the same for I/O
interrupt controllers. To support these machines we also increase the
MAX_IO_PICS up to 8.
Cc: stable@vger.kernel.org
Tested-by: Mingcong Bai <baimingcong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
It is the built-in command line appended to the bootloader command line,
not the bootloader command line appended to the built-in command line.
Fixes: fa96b57c1490 ("LoongArch: Add build infrastructure")
Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
maoxiaochuan