Loongson2ef reserves io range below 0x4000 (LOONGSON_PCI_IO_START) while
ISA-mode only IDE controller on the south bridge still has a hard
dependency on ISA IO ports.
The reservation was done by lifting loongson_pci_io_resource.start onto
0x4000. Prior to commit ae81aad5c2e1 ("MIPS: PCI: Use
pci_enable_resources()"), the arch specific pcibios_enable_resources()
did not check if the resources were claimed, which diverges from what
PCI core checks, effectively hiding the fact that IDE IO resources were
not properly within the resource tree. After starting to use
pcibios_enable_resources() from PCI core, enabling IDE controller fails:
pata_cs5536 0000:00:0e.2: BAR 0 [io 0x01f0-0x01f7]: not claimed; can't enable device
pata_cs5536 0000:00:0e.2: probe with driver pata_cs5536 failed with error -22
MIPS PCI code already has support for enforcing lower bounds using
PCIBIOS_MIN_IO in pcibios_align_resource() without altering the IO
window start address itself. Make Loongson2ef PCI code use
PCIBIOS_MIN_IO too.
Fixes: ae81aad5c2e1 ("MIPS: PCI: Use pci_enable_resources()")
Cc: stable@vger.kernel.org
Tested-by: Beiyan Yun <root@infi.wang>
Tested-by: Yao Zi <me@ziyao.cc>
Signed-off-by: Rong Zhang <rongrong@oss.cipunited.com>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
We are about to set loongson_pci_io_resource.start to 0 and adopt
PCIBIOS_MIN_IO. As the first step, PCI controller needs to be registered
in early stage to make it the root of other resources (e.g., i8259) and
prevent resource conflicts.
Register it in plat_mem_setup() instead of arch_initcall().
Fixes: ae81aad5c2e1 ("MIPS: PCI: Use pci_enable_resources()")
Cc: stable@vger.kernel.org
Tested-by: Beiyan Yun <root@infi.wang>
Tested-by: Yao Zi <me@ziyao.cc>
Signed-off-by: Rong Zhang <rongrong@oss.cipunited.com>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The `interrupts` property indicates an RTC alarm interrupt, which is
required for RTCs that support the alarm feature, which is not supported
by the Loongson-1C RTC. We exclude it for a more accurate description.
Changing the `allowed` property is ABI-breaking behavior, but
throughout the existing Loongson DTS{i}, the description of the RTC
nodes conforms to the modified bingding rules.
Thus, the existing Loongson DTS{i} will not be affected.
Fixes: 487ef32caebe ("dt-bindings: rtc: Split loongson,ls2x-rtc into SoC-based compatibles")
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/b6295c907410f6708115cba4df0959ee6629f8a5.1768616276.git.zhoubinbin@loongson.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
With multiple virtio crypto devices supported with different NUMA
nodes, when crypto session is created, it will search virtio crypto
device with the same numa node of current CPU.
Here API topology_physical_package_id() is replaced with cpu_to_node()
since package id is physical concept, and one package id have multiple
memory numa id.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20260113030556.3522533-4-maobibo@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
When VM boots with one virtio-crypto PCI device and builtin backend,
run openssl benchmark command with multiple processes, such as
openssl speed -evp aes-128-cbc -engine afalg -seconds 10 -multi 32
openssl processes will hangup and there is error reported like this:
virtio_crypto virtio0: dataq.0:id 3 is not a head!
It seems that the data virtqueue need protection when it is handled
for virtio done notification. If the spinlock protection is added
in virtcrypto_done_task(), openssl benchmark with multiple processes
works well.
Fixes: fed93fb62e05 ("crypto: virtio - Handle dataq logic with tasklet")
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20260113030556.3522533-2-maobibo@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: bb40a2ef4fc9 ("clk: loongson1: convert from round_rate() to determine_rate()")
Reviewed-by: Keguang Zhang <keguang.zhang@gmail.com>
Tested-by: Keguang Zhang <keguang.zhang@gmail.com> # on LS1B & LS1C
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Rong Zhang