Since Linux 6.11 (commit 0ed03dd1f63f), the platform_driver .remove
callback returns void instead of int. ls2x_wdt_remove still returns int,
triggering an -Werror=incompatible-pointer-types build error at the
.remove = ls2x_wdt_remove assignment.
Change ls2x_wdt_remove's return type to void and drop the return 0.
For benchmarking or debugging purpose, we usually want to control SMT
via boot parameter and sysfs knobs. So add HOTPLUG_SMT implementation.
1. Boot parameters:
nosmt: Disable SMT, can be enabled via sysfs knobs.
nosmt=force: Disable SMT, cannot be enabled via sysfs knobs.
2. Runtime sysfs controls:
Write "on", "off", "forceoff" or the number of SMT threads (1, 2, ...)
to /sys/devices/system/cpu/smt/control.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
LoongArch supports ARCH_HAS_SET_DIRECT_MAP, therefore wire up the
memfd_secret system call, which just depends on it.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Signed-off-by: Lain "Fearyncess" Yang <fearyncess@aosc.io>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Document the clock controller shipped in Loongson-2K0300 SoC, which
generates various clock signals for SoC peripherals. Differing from
previous generations of SoCs, LS2K0300 requires a 120MHz external clock
input.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
SoC integrated peripherals on LS2K1000 and LS2K2000 could be discovered
as PCI devices, but require sideband interrupts to function, which are
previously described by interrupts and interrupt-parent properties.
However, pci/pci-device.yaml allows interrupts property to only specify
PCI INTx interrupts, not sideband ones. Convert these devices to use
interrupt-extended property, which describes sideband interrupts used by
PCI devices since dt-schema commit e6ea659d2baa ("schemas: pci-device:
Allow interrupts-extended for sideband interrupts"), eliminating
dtbs_check warnings.
Cc: stable@vger.kernel.org
Fixes: 30a5532a3206 ("LoongArch: dts: DeviceTree for Loongson-2K1000")
Signed-off-by: Yao Zi <me@ziyao.cc>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
I am going to introduce the NAND controllers of the Loongson-2K series
CPUs, which are similar to Loongson-1.
As preparation, rename all prefixes from Loongson1-specific to
Loongson-generic.
No functional change intended.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The __pmd() and __pte() helper macros provide the correct initialization
syntax and abstraction for the pmd_t and pte_t types.
Use __pmd() to fix follow warning about __swp_entry_to_pmd() with gcc-15
under specific configs [1] :
In file included from ./include/linux/pgtable.h:6,
from ./include/linux/mm.h:31,
from ./include/linux/pagemap.h:8,
from arch/loongarch/mm/init.c:14:
./include/linux/swapops.h: In function ‘swp_entry_to_pmd’:
./arch/loongarch/include/asm/pgtable.h:302:34: error: missing braces around initializer [-Werror=missing-braces]
302 | #define __swp_entry_to_pmd(x) ((pmd_t) { (x).val | _PAGE_HUGE })
| ^
./include/linux/swapops.h:559:16: note: in expansion of macro ‘__swp_entry_to_pmd’
559 | return __swp_entry_to_pmd(arch_entry);
| ^~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Also update __swp_entry_to_pte() to use __pte() for consistency.
[1]. https://download.01.org/0day-ci/archive/20251119/202511190316.luI90kAo-lkp@intel.com/config
Cc: stable@vger.kernel.org
Signed-off-by: Yuli Wang <wangyl5933@chinaunicom.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Some processors have no IOCSR.VENDOR and IOCSR.CPUNAME, some processors
have these registers but there is no valid information.
Consolidate CPU names in /proc/cpuinfo:
1. Add "PRID" to display the PRID & Core-Name;
2. Let "Model Name" display "Unknown" if no valid name.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Now there 5 places which calculate max_pfn & max_low_pfn:
1. in fdt_setup() for FDT systems;
2. in memblock_init() for ACPI systems;
3. in init_numa_memory() for NUMA systems;
4. in arch_mem_init() to recalculate for "mem=" cmdline;
5. in paging_init() to recalculate for NUMA systems.
Since memblock_init() is called both for ACPI and FDT systems, move the
calculation out of the for_each_efi_memory_desc() loop can eliminate the
first case. The last case is very questionable (may be derived from the
MIPS/Loongson code) and breaks the "mem=" cmdline, so should be removed.
And then the NUMA version of paging_init() can be also eliminated.
After consolidation there are 3 places of calculation:
1. in memblock_init() for both ACPI and FDT systems;
2. in init_numa_memory() to recalculate for NUMA systems;
3. in arch_mem_init() to recalculate for the "mem=" cmdline.
For all cases the calculation is:
max_pfn = PFN_DOWN(memblock_end_of_DRAM());
max_low_pfn = min(PFN_DOWN(HIGHMEM_START), max_pfn);
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
1. Use phys_addr_t instead of u64, which can work for both 32/64 bits.
2. Check whether the input physical address is above TO_PHYS_MASK (and
return NULL if yes) for the DMW version.
Note: In theory early_ioremap() also need the TO_PHYS_MASK checking, but
the UEFI BIOS pass some DMW virtual addresses.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
It's used to work around an objtool issue since commit abb2a5572264
("LoongArch: Add cflag -fno-isolate-erroneous-paths-dereference"), but
it's then passed to bindgen and cause an error because Clang does not
have this option.
Fixes: abb2a5572264 ("LoongArch: Add cflag -fno-isolate-erroneous-paths-dereference")
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Mingcong Bai <jeffbai@aosc.io>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Attempt VMA lock-based page fault handling first, and fall back to the
existing mmap_lock-based handling if that fails.
The "ebizzy -mTRp" test on Loongson-3A6000 shows that PER_VMA_LOCK can
improve the benchmark by about 17.9% (97837.7 to 115430.8).
This is the LoongArch variant of "x86/mm: try VMA lock-based page fault
handling first".
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Currently, when compiling with GCC, there is no "break 7" instruction
for zero division due to using the option -mno-check-zero-division, but
the compiler still generates "break 0" instruction for zero division.
Here is a simple example:
$ cat test.c
int div(int a)
{
return a / 0;
}
$ gcc -O2 -S test.c -o test.s
GCC generates "break 0" on LoongArch and "ud2" on x86, objtool decodes
"ud2" as INSN_BUG for x86, so decode "break 0" as INSN_BUG can fix the
objtool warnings for LoongArch, but this is not the intention.
When decoding "break 0" as INSN_TRAP in the previous commit, the aim is
to handle "break 0" as a trap. The generated "break 0" for zero division
by GCC is not proper, it should generate a break instruction with proper
bug type, so add the GCC option -fno-isolate-erroneous-paths-dereference
to avoid generating the unexpected "break 0" instruction for now.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202509200413.7uihAxJ5-lkp@intel.com/
Fixes: baad7830ee9a ("objtool/LoongArch: Mark types based on break immediate code")
Suggested-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
When compiling with LLVM and CONFIG_RUST is set, there exist objtool
warnings in rust/core.o and rust/kernel.o, like this:
rust/core.o: warning: objtool:
_RNvXs1_NtNtCs5QSdWC790r4_4core5ascii10ascii_charNtB5_9AsciiCharNtNtB9_3fmt5Debug3fmt+0x54:
sibling call from callable instruction with modified stack frame
For this special case, the related object file shows that there is no
generated relocation section '.rela.discard.tablejump_annotate' for the
table jump instruction jirl, thus objtool can not know that what is the
actual destination address.
If rustc has the option "-Cllvm-args=--loongarch-annotate-tablejump",
pass the option to enable jump tables for objtool, otherwise it should
pass "-Zno-jump-tables" to keep compatibility with older rustc.
How to test:
$ rustup component add rust-src
$ make LLVM=1 rustavailable
$ make ARCH=loongarch LLVM=1 clean defconfig
$ scripts/config -d MODVERSIONS \
-e RUST -e SAMPLES -e SAMPLES_RUST \
-e SAMPLE_RUST_CONFIGFS -e SAMPLE_RUST_MINIMAL \
-e SAMPLE_RUST_MISC_DEVICE -e SAMPLE_RUST_PRINT \
-e SAMPLE_RUST_DMA -e SAMPLE_RUST_DRIVER_PCI \
-e SAMPLE_RUST_DRIVER_PLATFORM -e SAMPLE_RUST_DRIVER_FAUX \
-e SAMPLE_RUST_DRIVER_AUXILIARY -e SAMPLE_RUST_HOSTPROGS
$ make ARCH=loongarch LLVM=1 olddefconfig all
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
When compiling with LLVM and CONFIG_LTO_CLANG is set, there exist many
objtool warnings "sibling call from callable instruction with modified
stack frame".
For this special case, the related object file shows that there is no
generated relocation section '.rela.discard.tablejump_annotate' for the
table jump instruction jirl, thus objtool can not know that what is the
actual destination address.
It needs to do something on the LLVM side to make sure that there is the
relocation section '.rela.discard.tablejump_annotate' if LTO is enabled,
but in order to maintain compatibility for the current LLVM compiler,
this can be done in the kernel Makefile for now. Ensure it is aware of
linker with LTO, '--loongarch-annotate-tablejump' needs to be passed via
'-mllvm' to ld.lld.
Note that it should also pass the compiler option -mannotate-tablejump
rather than only pass '-mllvm --loongarch-annotate-tablejump' to ld.lld
if LTO is enabled, otherwise there are no jump info for some table jump
instructions.
Fixes: e20ab7d454ee ("LoongArch: Enable jump table for objtool")
Closes: https://lore.kernel.org/loongarch/20250731175655.GA1455142@ax162/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Co-developed-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
1.Fix the issue of the SD card crashing due to repeated plugging and unplugging.
2.add init-polarity to support setup init pwm status
3.loongson2_thermal: update temperature formula
4.Fix alert/critical temperature to 75/105
5.Add alientek-2k300 support
the error message is as follow:
../arch/loongarch/mm/mmap.c: In function ‘arch_get_unmapped_area_common’:
../arch/loongarch/mm/mmap.c:69:35: error: implicit declaration of function ‘huge_page_mask_align’; did you mean ‘huge_page_mask’? [-Werror=implicit-function-declaration]
69 | info.align_mask = huge_page_mask_align(filp);
| ^~~~~~~~~~~~~~~~~~~~
| huge_page_mask
cc1: some warnings being treated as errors
code sync for linux-6.13
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The current max_pfn equals to zero. In this case, it causes user cannot
get some page information through /proc filesystem such as kpagecount.
The following message is displayed by stress-ng test suite with command
"stress-ng --verbose --physpage 1 -t 1".
# stress-ng --verbose --physpage 1 -t 1
stress-ng: error: [1691] physpage: cannot read page count for address 0x134ac000 in /proc/kpagecount, errno=22 (Invalid argument)
stress-ng: error: [1691] physpage: cannot read page count for address 0x7ffff207c3a8 in /proc/kpagecount, errno=22 (Invalid argument)
stress-ng: error: [1691] physpage: cannot read page count for address 0x134b0000 in /proc/kpagecount, errno=22 (Invalid argument)
...
After applying this patch, the kernel can pass the test.
# stress-ng --verbose --physpage 1 -t 1
stress-ng: debug: [1701] physpage: [1701] started (instance 0 on CPU 3)
stress-ng: debug: [1701] physpage: [1701] exited (instance 0 on CPU 3)
stress-ng: debug: [1700] physpage: [1701] terminated (success)
Cc: stable@vger.kernel.org # 6.8+
Fixes: ff6c3d81f2e8 ("NUMA: optimize detection of memory with no node id assigned by firmware")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
maoxiaochuan