Vincent reported that running XDP synproxy program on LoongArch results
in the following error:
JIT doesn't support bpf-to-bpf calls
With dmesg:
multi-func JIT bug 1391 != 1390
The root cause is that verifier will refill the imm with the correct
addresses of bpf_calls for BPF_PSEUDO_FUNC instructions and then run
the last pass of JIT. So we generate different JIT code for the same
instruction in two passes (one for placeholder and the other for the
real address). Let's use move_addr() instead.
See commit 64f50f6575721ef0 ("LoongArch, bpf: Use 4 instructions for
function address in JIT") for a similar fix.
Cc: stable@vger.kernel.org
Fixes: 69c087ba6225 ("bpf: Add bpf_for_each_map_elem() helper")
Fixes: bb035ef0cc91 ("LoongArch: BPF: Support mixing bpf2bpf and tailcalls")
Reported-by: Vincent Li <vincent.mc.li@gmail.com>
Tested-by: Vincent Li <vincent.mc.li@gmail.com>
Closes: https://lore.kernel.org/loongarch/CAK3+h2yfM9FTNiXvEQBkvtuoJrvzmN4c_NZsFXqEk4Cj1tsBNA@mail.gmail.com/T/#u
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The arch_kgdb_breakpoint() function defines the kgdb_breakinst symbol
using inline assembly.
1. There's a potential issue where the compiler might inline
arch_kgdb_breakpoint(), which would then define the kgdb_breakinst
symbol multiple times, leading to a linker error.
To prevent this, declare arch_kgdb_breakpoint() as noinline.
Fix follow error with LLVM-19 *only* when LTO_CLANG_FULL:
LD vmlinux.o
ld.lld-19: error: ld-temp.o <inline asm>:3:1: symbol 'kgdb_breakinst' is already defined
kgdb_breakinst: break 2
^
2. Remove "nop" in the inline assembly because it's meaningless for
LoongArch here.
3. Add "STACK_FRAME_NON_STANDARD" for arch_kgdb_breakpoint() to avoid
the objtool warning.
Fixes: e14dd076964e ("LoongArch: Add basic KGDB & KDB support")
Tested-by: Binbin Zhou <zhoubinbin@loongson.cn>
Co-developed-by: Winston Wen <wentao@uniontech.com>
Signed-off-by: Winston Wen <wentao@uniontech.com>
Co-developed-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Add missing of_node_put() to properly handle the reference count of the
device node obtained from of_get_cpu_node().
Fixes: 44a01f1f726a ("LoongArch: Parsing CPU-related information from DTS")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
ARCH_DMA_MINALIGN is 1 by default, but some LoongArch-specific devices
(such as APBDMA) require 16 bytes alignment. When the data buffer length
is too small, the hardware may make an error writing cacheline. Thus, it
is dangerous to allocate a small memory buffer for DMA. It's always safe
to define ARCH_DMA_MINALIGN as L1_CACHE_BYTES but unnecessary (kmalloc()
need small memory objects). Therefore, just increase it to 16.
Cc: stable@vger.kernel.org
Tested-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Begin with Loongson-3C6000, the number of PCI host can be as many as
8 for multi-chip machines, and this number should be the same for I/O
interrupt controllers. To support these machines we also increase the
MAX_IO_PICS up to 8.
Cc: stable@vger.kernel.org
Tested-by: Mingcong Bai <baimingcong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
It is the built-in command line appended to the bootloader command line,
not the bootloader command line appended to the built-in command line.
Fixes: fa96b57c1490 ("LoongArch: Add build infrastructure")
Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The GPIO library will parse the respective property to fill ngpio.
No need to repeat it in the driver.
While at it, drop unused fwnode field.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Functions prefixed with "pcim_" are managed devres functions which
perform automatic cleanup once the driver unloads. It is, thus, not
necessary to call any cleanup functions in remove() callbacks.
Remove the pcim_ cleanup function calls in the remove() callbacks.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Tested-by: Henry Chen <chenx97@aosc.io>
loongson_dwmac_probe() contains a loop which doesn't have an effect,
because it tries to call pcim_iomap_regions() with the same parameters
several times. The break statement at the loop's end furthermore ensures
that the loop only runs once anyways.
Remove the surplus loop.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Tested-by: Henry Chen <chenx97@aosc.io>
pcim_iomap_regions() should receive the driver's name as its third
parameter, not the PCI device's name.
Define the driver name with a macro and use it at the appropriate
places, including pcim_iomap_regions().
Cc: stable@vger.kernel.org # v5.14+
Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Tested-by: Henry Chen <chenx97@aosc.io>
the error message is as follow:
../arch/loongarch/mm/mmap.c: In function ‘arch_get_unmapped_area_common’:
../arch/loongarch/mm/mmap.c:69:35: error: implicit declaration of function ‘huge_page_mask_align’; did you mean ‘huge_page_mask’? [-Werror=implicit-function-declaration]
69 | info.align_mask = huge_page_mask_align(filp);
| ^~~~~~~~~~~~~~~~~~~~
| huge_page_mask
cc1: some warnings being treated as errors
code sync for linux-6.13
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The current max_pfn equals to zero. In this case, it causes user cannot
get some page information through /proc filesystem such as kpagecount.
The following message is displayed by stress-ng test suite with command
"stress-ng --verbose --physpage 1 -t 1".
# stress-ng --verbose --physpage 1 -t 1
stress-ng: error: [1691] physpage: cannot read page count for address 0x134ac000 in /proc/kpagecount, errno=22 (Invalid argument)
stress-ng: error: [1691] physpage: cannot read page count for address 0x7ffff207c3a8 in /proc/kpagecount, errno=22 (Invalid argument)
stress-ng: error: [1691] physpage: cannot read page count for address 0x134b0000 in /proc/kpagecount, errno=22 (Invalid argument)
...
After applying this patch, the kernel can pass the test.
# stress-ng --verbose --physpage 1 -t 1
stress-ng: debug: [1701] physpage: [1701] started (instance 0 on CPU 3)
stress-ng: debug: [1701] physpage: [1701] exited (instance 0 on CPU 3)
stress-ng: debug: [1700] physpage: [1701] terminated (success)
Cc: stable@vger.kernel.org # 6.8+
Fixes: ff6c3d81f2e8 ("NUMA: optimize detection of memory with no node id assigned by firmware")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
When compiling on LoongArch, there exists the following objtool warning
in arch/loongarch/kernel/machine_kexec.o:
kexec_reboot() falls through to next function crash_shutdown_secondary()
Avoid using unreachable() as it can (and will in the absence of UBSAN)
generate fall-through code. Use BUG() so we get a "break BRK_BUG" trap
(with unreachable annotation).
Cc: stable@vger.kernel.org # 6.12+
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
According to the chip manual, the I2C register access type of
Loongson-2K2000/LS7A is "B", so we can only access registers in byte
form (readb()/writeb()).
Although Loongson-2K0500/Loongson-2K1000 do not have similar
constraints, register accesses in byte form also behave correctly.
Also, in hardware, the frequency division registers are defined as two
separate registers (high 8-bit and low 8-bit), so we just access them
directly as bytes.
Cc: stable@vger.kernel.org
Fixes: 015e61f0bffd ("i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller")
Co-developed-by: Hongliang Wang <wanghongliang@loongson.cn>
Signed-off-by: Hongliang Wang <wanghongliang@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Glibc added support for .gnu.hash in 2006 and .hash has been obsoleted
far before the first LoongArch CPU was taped. Using --hash-style=sysv
might imply unaddressed issues and confuse readers.
Some architectures use an explicit --hash-style=both for vDSO here, but
DT_GNU_HASH has already been supported by Glibc and Musl and become the
de-facto standard of the distros when the first LoongArch CPU was taped.
So DT_HASH seems just wasting storage space for LoongArch.
Just drop the option and rely on the linker default, which is likely
"gnu" (Arch, Debian, Gentoo, LFS) on all LoongArch distros (confirmed on
Arch, Debian, Gentoo, and LFS; AOSC now defaults to "both" but it seems
just an oversight).
Following the logic of commit 48f6430505c0b049 ("arm64/vdso: Remove
--hash-style=sysv").
Link: https://github.com/AOSC-Dev/aosc-os-abbs/pull/9796
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Make use of the t8 register for vgetrandom-chacha, so we don't need to
reuse a register and rematerialize a constant. I
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
When CONFIG_RANDOM_KMALLOC_CACHES or other randomization infrastructrue
enabled, the idle_task's stack may different between the booting kernel
and target kernel. So when resuming from hibernation, an ACTION_BOOT_CPU
IPI wakeup the idle instruction in arch_cpu_idle_dead() and jump to the
interrupt handler. But since the stack pointer is changed, the interrupt
handler cannot restore correct context.
So rename the current arch_cpu_idle_dead() to idle_play_dead(), make it
as the default version of play_dead(), and the new arch_cpu_idle_dead()
call play_dead() directly. For hibernation, implement an arch-specific
hibernate_resume_nonboot_cpu_disable() to use the polling version (idle
instruction is replace by nop, and irq is disabled) of play_dead(), i.e.
poll_play_dead(), to avoid IPI handler corrupting the idle_task's stack
when resuming from hibernation.
This solution is a little similar to commit 406f992e4a372dafbe3c ("x86 /
hibernate: Use hlt_play_dead() when resuming from hibernation").
Cc: stable@vger.kernel.org
Tested-by: Erpeng Xu <xuerpeng@uniontech.com>
Tested-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Option HAVE_VIRT_CPU_ACCOUNTING_GEN is selected by default for 64bit
system in kconfig file arch/Kconfig. There is another selection in file
arch/loongarch/Kconfig if SMP is not selected. Indeed this option is
SMP-safe so it brings out some misunderstanding for non-SMP case. Here
always select option HAVE_VIRT_CPU_ACCOUNTING_GEN for future possible
32bit system (it is also 32bit-safe because we no longer use cputime_t).
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The size of DMA descriptors is 32 bytes at most.
net_prefetch() for received frames, and keep prefetch() for descriptors.
This patch brings ~4.8% driver performance improvement in a TCP RX
throughput test with iPerf tool on a single isolated Cortex-A65 CPU
core, 2.92 Gbits/sec increased to 3.06 Gbits/sec.
Suggested-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Current code prefetches cache lines for the received frame first, and
then dma_sync_single_for_cpu() against this frame, this is wrong.
Cache prefetch should be triggered after dma_sync_single_for_cpu().
This patch brings ~2.8% driver performance improvement in a TCP RX
throughput test with iPerf tool on a single isolated Cortex-A65 CPU
core, 2.84 Gbits/sec increased to 2.92 Gbits/sec.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Hengqi Chen