mirror of
https://gitee.com/open-loongarch/linux-6.12.git
synced 2026-10-25 20:47:11 +08:00
refactor: remove old atim & gtim pwm driver
This commit is contained in:
ilikara
@@ -889,69 +889,6 @@
|
||||
/* Optional for that dr_mode = "host" or dr_mode = "peripheral" */
|
||||
};
|
||||
|
||||
timers1: timer@16118000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "loongson,loongson-timers";
|
||||
reg = <0 0x16118000 0 0x1000>;
|
||||
interrupt-parent = <&liointc0>;
|
||||
interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clocks CLK_APB>;
|
||||
clock-names = "int";
|
||||
dmas = <&dma 0 0x400>,
|
||||
<&dma 1 0x400>,
|
||||
<&dma 2 0x400>,
|
||||
<&dma 3 0x400>,
|
||||
<&dma 4 0x400>,
|
||||
<&dma 5 0x400>,
|
||||
<&dma 6 0x400>;
|
||||
dma-names = "ch1", "ch2", "ch3", "ch4", "com", "up", "trig";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pwm_atim: pwm@16118000{
|
||||
compatible = "loongson,ls2k-pwm-atim";
|
||||
reg = <0 0x16118000 0 0x1000>;
|
||||
interrupt-parent = <&liointc0>;
|
||||
interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#pwm-cells = <2>;
|
||||
pinctrl-0 = <&atim3_pin_m1>, <&atim3n_pin_m1>;
|
||||
pinctrl-names = "default";
|
||||
clock-frequency = <200000000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timers2: timer@16119000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "loongson,loongson-timers";
|
||||
reg = <0 0x16119000 0 0x1000>;
|
||||
interrupt-parent = <&liointc0>;
|
||||
interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clocks CLK_APB>;
|
||||
clock-names = "int";
|
||||
dmas = <&dma 0 0x400>,
|
||||
<&dma 1 0x400>,
|
||||
<&dma 2 0x400>,
|
||||
<&dma 3 0x400>,
|
||||
<&dma 5 0x400>,
|
||||
<&dma 6 0x400>;
|
||||
dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pwm_gtim: pwm@16119000{
|
||||
compatible = "loongson,ls2k-pwm-gtim";
|
||||
reg = <0 0x16119000 0 0x1000>;
|
||||
interrupt-parent = <&liointc0>;
|
||||
interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#pwm-cells = <2>;
|
||||
pinctrl-0 = <>im2_pin_m1>, <>im3_pin_m1>;
|
||||
pinctrl-names = "default";
|
||||
clock-frequency = <200000000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pwm0: pwm@0x1611b000 {
|
||||
compatible = "loongson,ls2k-pwm";
|
||||
reg = <0 0x1611b000 0 0xf>;
|
||||
@@ -1008,6 +945,63 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timers1: timer@16118000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "loongson,loongson-timers";
|
||||
reg = <0 0x16118000 0 0x1000>;
|
||||
interrupt-parent = <&liointc0>;
|
||||
interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clocks CLK_APB>;
|
||||
clock-names = "int";
|
||||
dmas = <&dma 0 0x400>,
|
||||
<&dma 1 0x400>,
|
||||
<&dma 2 0x400>,
|
||||
<&dma 3 0x400>,
|
||||
<&dma 4 0x400>,
|
||||
<&dma 5 0x400>,
|
||||
<&dma 6 0x400>;
|
||||
dma-names = "ch1", "ch2", "ch3", "ch4", "com", "up", "trig";
|
||||
pinctrl-0 = <&atim3_pin_m1>, <&atim3n_pin_m1>;
|
||||
pinctrl-names = "default";
|
||||
clock-frequency = <200000000>;
|
||||
status = "disabled";
|
||||
|
||||
pwm {
|
||||
compatible = "loongson,ls2k-pwm-timer";
|
||||
#pwm-cells = <2>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
timers2: timer@16119000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "loongson,loongson-timers";
|
||||
reg = <0 0x16119000 0 0x1000>;
|
||||
interrupt-parent = <&liointc0>;
|
||||
interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clocks CLK_APB>;
|
||||
clock-names = "int";
|
||||
dmas = <&dma 0 0x400>,
|
||||
<&dma 1 0x400>,
|
||||
<&dma 2 0x400>,
|
||||
<&dma 3 0x400>,
|
||||
<&dma 5 0x400>,
|
||||
<&dma 6 0x400>;
|
||||
dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
|
||||
pinctrl-0 = <>im2_pin_m1>, <>im3_pin_m1>;
|
||||
pinctrl-names = "default";
|
||||
clock-frequency = <200000000>;
|
||||
status = "disabled";
|
||||
|
||||
pwm {
|
||||
compatible = "loongson,ls2k-pwm-timer";
|
||||
#pwm-cells = <2>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
tsensor: tsensor@0x16001500 {
|
||||
compatible = "loongson,ls2k300-thermal";
|
||||
reg = <0 0x16001500 0 0x30>;
|
||||
|
||||
@@ -372,26 +372,6 @@ config PWM_LOONGSON_TIMER
|
||||
To compile this driver as a module, choose M here: the module
|
||||
will be called pwm-ls-timer.
|
||||
|
||||
config PWM_LOONGSON_GTIM
|
||||
tristate "Loongson GTIM PWM support"
|
||||
depends on MACH_LOONGSON64 || COMPILE_TEST
|
||||
depends on COMMON_CLK
|
||||
help
|
||||
GTIM PWM framework driver for loongson2k.
|
||||
|
||||
To compile this driver as a module, choose M here: the module
|
||||
will be called pwm-ls-gtim.
|
||||
|
||||
config PWM_LOONGSON_ATIM
|
||||
tristate "Loongson ATIM PWM support"
|
||||
depends on MACH_LOONGSON64 || COMPILE_TEST
|
||||
depends on COMMON_CLK
|
||||
help
|
||||
ATIM PWM framework driver for loongson2k.
|
||||
|
||||
To compile this driver as a module, choose M here: the module
|
||||
will be called pwm-ls-atim.
|
||||
|
||||
config PWM_LP3943
|
||||
tristate "TI/National Semiconductor LP3943 PWM support"
|
||||
depends on MFD_LP3943
|
||||
|
||||
@@ -32,8 +32,6 @@ obj-$(CONFIG_PWM_JZ4740) += pwm-jz4740.o
|
||||
obj-$(CONFIG_PWM_KEEMBAY) += pwm-keembay.o
|
||||
obj-$(CONFIG_PWM_LOONGSON) += pwm-loongson.o
|
||||
obj-$(CONFIG_PWM_LOONGSON_TIMER) += pwm-ls-timer.o
|
||||
obj-$(CONFIG_PWM_LOONGSON_ATIM) += pwm-loongson-atim.o
|
||||
obj-$(CONFIG_PWM_LOONGSON_GTIM) += pwm-loongson-gtim.o
|
||||
obj-$(CONFIG_PWM_LP3943) += pwm-lp3943.o
|
||||
obj-$(CONFIG_PWM_LPC18XX_SCT) += pwm-lpc18xx-sct.o
|
||||
obj-$(CONFIG_PWM_LPC32XX) += pwm-lpc32xx.o
|
||||
|
||||
@@ -1,374 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Copyright (C) 2024 by ilikara 3435193369@qq.com.
|
||||
*
|
||||
* Loongson ATIM PWM driver
|
||||
*
|
||||
* For Loongson's ATIM IP block documentation please refer Chapter 18 of
|
||||
* Reference Manual: https://loongson.cn/uploads/images/2024120211205269050.%E9%BE%99%E8%8A%AF2K0300%E5%A4%84%E7%90%86%E5%99%A8%E7%94%A8%E6%88%B7%E6%89%8B%E5%86%8C_V1.0.pdf
|
||||
*
|
||||
* Author: Ilikara <3435193369@qq.com>
|
||||
*
|
||||
* Limitations:
|
||||
* - ATIM_CNT will be set to 0 when ls_pwm_atim_config is called.
|
||||
* - All the 8 channels share the same period.
|
||||
* - Channel n and n+4 share the same duty cycle.
|
||||
*/
|
||||
|
||||
#include <linux/acpi.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/pwm.h>
|
||||
#include <linux/units.h>
|
||||
#include <linux/delay.h>
|
||||
|
||||
/* counter offest */
|
||||
#define ATIM_CR1 0x00
|
||||
#define ATIM_CR2 0x04
|
||||
#define ATIM_SMCR 0x08
|
||||
#define ATIM_DIER 0x0C
|
||||
#define ATIM_SR 0x10
|
||||
#define ATIM_EGR 0x14
|
||||
#define ATIM_CCMR(n) 0x18 + (((n) % 4) / 2) * 0x04
|
||||
#define ATIM_CCER 0x20
|
||||
#define ATIM_CNT 0x24
|
||||
#define ATIM_PSC 0x28
|
||||
#define ATIM_ARR 0x2C
|
||||
#define ATIM_RCR 0x30
|
||||
#define ATIM_CCR(n) 0x34 + ((n) % 4) * 0x04
|
||||
#define ATIM_BDTR 0x44
|
||||
#define ATIM_INSTA 0x50
|
||||
|
||||
/* CR1 each bit */
|
||||
#define CR1_CEN BIT(0)
|
||||
|
||||
/* EGR each bit */
|
||||
#define EGR_UG BIT(0)
|
||||
|
||||
/* CCMR each bit */
|
||||
#define CCMR_CCnS(n) BIT((n) % 2 * 8 + 0)
|
||||
#define CCMR_OCnFE(n) BIT((n) % 2 * 8 + 2)
|
||||
#define CCMR_OCnPE(n) BIT((n) % 2 * 8 + 3)
|
||||
#define CCMR_OCnM(n) BIT((n) % 2 * 8 + 4)
|
||||
#define CCMR_OCnCE(n) BIT((n) % 2 * 8 + 7)
|
||||
|
||||
/* CCER each bit */
|
||||
#define CCER_CCnE(n) BIT(((n) % 4) * 4 + 0 + ((n) / 4) * 2)
|
||||
#define CCER_CCnP(n) BIT(((n) % 4) * 4 + 1 + ((n) / 4) * 2)
|
||||
|
||||
/* BDTR each bit */
|
||||
#define BDTR_MOE BIT(15)
|
||||
|
||||
/* default input clk frequency for the ACPI case */
|
||||
#define LOONGSON_PWM_FREQ_DEFAULT 50000000 /* Hz */
|
||||
|
||||
struct pwm_loongson_suspend_store {
|
||||
u32 arr_reg;
|
||||
u32 ccr_reg[4];
|
||||
u32 ccer_reg;
|
||||
u32 en_mark;
|
||||
};
|
||||
|
||||
struct pwm_loongson_ddata {
|
||||
struct clk *clk;
|
||||
void __iomem *base;
|
||||
u64 clk_rate;
|
||||
struct pwm_loongson_suspend_store lss;
|
||||
};
|
||||
|
||||
static inline struct pwm_loongson_ddata *
|
||||
to_pwm_loongson_ddata(struct pwm_chip *chip)
|
||||
{
|
||||
return pwmchip_get_drvdata(chip);
|
||||
}
|
||||
|
||||
static inline u32 pwm_loongson_readl(struct pwm_loongson_ddata *ddata,
|
||||
u32 offset)
|
||||
{
|
||||
return readl(ddata->base + offset);
|
||||
}
|
||||
|
||||
static inline void pwm_loongson_writel(struct pwm_loongson_ddata *ddata,
|
||||
u32 val, u32 offset)
|
||||
{
|
||||
writel(val, ddata->base + offset);
|
||||
}
|
||||
|
||||
static int ls_pwm_atim_set_polarity(struct pwm_chip *chip,
|
||||
struct pwm_device *pwm,
|
||||
enum pwm_polarity polarity)
|
||||
{
|
||||
u16 val;
|
||||
struct pwm_loongson_ddata *ddata = to_pwm_loongson_ddata(chip);
|
||||
|
||||
val = pwm_loongson_readl(ddata, ATIM_CCER);
|
||||
|
||||
if (polarity == PWM_POLARITY_INVERSED)
|
||||
/* Duty cycle defines LOW period of PWM */
|
||||
val &= ~CCER_CCnP(pwm->hwpwm);
|
||||
else
|
||||
/* Duty cycle defines HIGH period of PWM */
|
||||
val |= CCER_CCnP(pwm->hwpwm);
|
||||
|
||||
pwm_loongson_writel(ddata, val, ATIM_CCER);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void ls_pwm_atim_disable(struct pwm_chip *chip, struct pwm_device *pwm)
|
||||
{
|
||||
struct pwm_loongson_ddata *ddata = to_pwm_loongson_ddata(chip);
|
||||
u32 val;
|
||||
|
||||
if (pwm->state.polarity == PWM_POLARITY_NORMAL)
|
||||
pwm_loongson_writel(ddata, ddata->lss.arr_reg,
|
||||
ATIM_CCR(pwm->hwpwm));
|
||||
else if (pwm->state.polarity == PWM_POLARITY_INVERSED)
|
||||
pwm_loongson_writel(ddata, 0, ATIM_CCR(pwm->hwpwm));
|
||||
|
||||
val = pwm_loongson_readl(ddata, ATIM_CCMR(pwm->hwpwm));
|
||||
val &= ~(0b111 * CCMR_OCnM(pwm->hwpwm));
|
||||
pwm_loongson_writel(ddata, val, ATIM_CCMR(pwm->hwpwm));
|
||||
|
||||
val = pwm_loongson_readl(ddata, ATIM_CCER);
|
||||
val &= ~CCER_CCnE(pwm->hwpwm);
|
||||
pwm_loongson_writel(ddata, val, ATIM_CCER);
|
||||
|
||||
ddata->lss.en_mark &= ~BIT(pwm->hwpwm);
|
||||
if (ddata->lss.en_mark == 0b00000000) {
|
||||
val = pwm_loongson_readl(ddata, ATIM_CR1);
|
||||
val &= ~CR1_CEN;
|
||||
pwm_loongson_writel(ddata, val, ATIM_CR1);
|
||||
pwm_loongson_writel(ddata, 0x0, ATIM_CNT);
|
||||
}
|
||||
}
|
||||
|
||||
static int ls_pwm_atim_enable(struct pwm_chip *chip, struct pwm_device *pwm)
|
||||
{
|
||||
u32 val;
|
||||
struct pwm_loongson_ddata *ddata = to_pwm_loongson_ddata(chip);
|
||||
|
||||
pwm_loongson_writel(ddata, ddata->lss.ccr_reg[pwm->hwpwm % 4],
|
||||
ATIM_CCR(pwm->hwpwm));
|
||||
pwm_loongson_writel(ddata, ddata->lss.arr_reg, ATIM_ARR);
|
||||
|
||||
// todo:类似config函数中的特殊处理
|
||||
val = pwm_loongson_readl(ddata, ATIM_CCMR(pwm->hwpwm));
|
||||
val |= 0b111 * CCMR_OCnM(pwm->hwpwm);
|
||||
pwm_loongson_writel(ddata, val, ATIM_CCMR(pwm->hwpwm));
|
||||
|
||||
val = pwm_loongson_readl(ddata, ATIM_CCER);
|
||||
val |= CCER_CCnE(pwm->hwpwm);
|
||||
pwm_loongson_writel(ddata, val, ATIM_CCER);
|
||||
|
||||
if (ddata->lss.en_mark == 0b00000000) {
|
||||
pwm_loongson_writel(ddata, 0x0, ATIM_CNT);
|
||||
val = pwm_loongson_readl(ddata, ATIM_CR1);
|
||||
val |= CR1_CEN;
|
||||
pwm_loongson_writel(ddata, val, ATIM_CR1);
|
||||
}
|
||||
ddata->lss.en_mark |= BIT(pwm->hwpwm);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ls_pwm_atim_config(struct pwm_chip *chip, struct pwm_device *pwm,
|
||||
u64 duty_ns, u64 period_ns)
|
||||
{
|
||||
u32 duty, period;
|
||||
struct pwm_loongson_ddata *ddata = to_pwm_loongson_ddata(chip);
|
||||
|
||||
/* duty = duty_ns * ddata->clk_rate / NSEC_PER_SEC */
|
||||
duty = mul_u64_u64_div_u64(duty_ns, ddata->clk_rate, NSEC_PER_SEC);
|
||||
pwm_loongson_writel(ddata, duty, ATIM_CCR(pwm->hwpwm));
|
||||
|
||||
/* period = period_ns * ddata->clk_rate / NSEC_PER_SEC */
|
||||
period = mul_u64_u64_div_u64(period_ns, ddata->clk_rate, NSEC_PER_SEC);
|
||||
pwm_loongson_writel(ddata, period, ATIM_ARR);
|
||||
|
||||
pwm_loongson_writel(ddata, 0, ATIM_CNT);
|
||||
|
||||
ddata->lss.ccr_reg[pwm->hwpwm % 4] = duty;
|
||||
ddata->lss.arr_reg = period;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ls_pwm_atim_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
||||
const struct pwm_state *state)
|
||||
{
|
||||
int ret;
|
||||
u64 period, duty_cycle;
|
||||
bool enabled = pwm->state.enabled;
|
||||
|
||||
if (!state->enabled) {
|
||||
if (enabled)
|
||||
ls_pwm_atim_disable(chip, pwm);
|
||||
return 0;
|
||||
}
|
||||
|
||||
ret = ls_pwm_atim_set_polarity(chip, pwm, state->polarity);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
period = min(state->period, NSEC_PER_SEC);
|
||||
duty_cycle = min(state->duty_cycle, NSEC_PER_SEC);
|
||||
|
||||
ret = ls_pwm_atim_config(chip, pwm, state->duty_cycle, state->period);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
if (!enabled && state->enabled)
|
||||
ret = ls_pwm_atim_enable(chip, pwm);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int ls_pwm_atim_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
|
||||
struct pwm_state *state)
|
||||
{
|
||||
u32 arr_reg, ccr_reg, ccer_reg;
|
||||
struct pwm_loongson_ddata *ddata = to_pwm_loongson_ddata(chip);
|
||||
|
||||
arr_reg = pwm_loongson_readl(ddata, ATIM_ARR);
|
||||
ccr_reg = pwm_loongson_readl(ddata, ATIM_CCR(pwm->hwpwm));
|
||||
ccer_reg = pwm_loongson_readl(ddata, ATIM_CCER);
|
||||
|
||||
/* duty & period have a max of 2^32, so we can't overflow */
|
||||
state->duty_cycle = DIV64_U64_ROUND_UP((u64)ccr_reg * NSEC_PER_SEC,
|
||||
ddata->clk_rate);
|
||||
state->period = DIV64_U64_ROUND_UP((u64)arr_reg * NSEC_PER_SEC,
|
||||
ddata->clk_rate);
|
||||
state->polarity = (ccer_reg & CCER_CCnP(pwm->hwpwm)) ?
|
||||
PWM_POLARITY_INVERSED :
|
||||
PWM_POLARITY_NORMAL;
|
||||
state->enabled = (ccer_reg & CCER_CCnE(pwm->hwpwm)) ? true : false;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct pwm_ops ls_pwm_atim_ops = {
|
||||
.apply = ls_pwm_atim_apply,
|
||||
.get_state = ls_pwm_atim_get_state,
|
||||
};
|
||||
|
||||
static int ls_pwm_atim_probe(struct platform_device *pdev)
|
||||
{
|
||||
int ret;
|
||||
struct pwm_chip *chip;
|
||||
struct pwm_loongson_ddata *ddata;
|
||||
struct device *dev = &pdev->dev;
|
||||
struct device_node *np = dev->of_node;
|
||||
u32 of_clk_freq = 0;
|
||||
|
||||
chip = devm_pwmchip_alloc(dev, 8, sizeof(*ddata));
|
||||
if (IS_ERR(chip))
|
||||
return PTR_ERR(chip);
|
||||
ddata = to_pwm_loongson_ddata(chip);
|
||||
|
||||
ddata->lss.en_mark = 0b00000000;
|
||||
|
||||
ddata->base = devm_platform_ioremap_resource(pdev, 0);
|
||||
if (IS_ERR(ddata->base))
|
||||
return PTR_ERR(ddata->base);
|
||||
|
||||
ddata->clk = devm_clk_get_optional_enabled(dev, NULL);
|
||||
if (IS_ERR(ddata->clk))
|
||||
return dev_err_probe(dev, PTR_ERR(ddata->clk),
|
||||
"failed to get pwm clock\n");
|
||||
ddata->clk_rate = LOONGSON_PWM_FREQ_DEFAULT;
|
||||
if (ddata->clk) {
|
||||
ret = devm_clk_rate_exclusive_get(dev, ddata->clk);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ddata->clk_rate = clk_get_rate(ddata->clk);
|
||||
} else {
|
||||
#ifdef CONFIG_OF
|
||||
if (!of_property_read_u32(np, "clock-frequency", &of_clk_freq))
|
||||
ddata->clk_rate = of_clk_freq;
|
||||
#endif
|
||||
}
|
||||
|
||||
/* Explicitly initialize the CCER register */
|
||||
pwm_loongson_writel(ddata, 0, ATIM_CCER);
|
||||
|
||||
/* Additional configuration for ATIM */
|
||||
pwm_loongson_writel(ddata, EGR_UG, ATIM_EGR);
|
||||
pwm_loongson_writel(ddata, BDTR_MOE, ATIM_BDTR);
|
||||
|
||||
chip->ops = &ls_pwm_atim_ops;
|
||||
chip->atomic = true;
|
||||
dev_set_drvdata(dev, chip);
|
||||
|
||||
ret = devm_pwmchip_add(dev, chip);
|
||||
if (ret < 0)
|
||||
return dev_err_probe(dev, ret, "failed to add PWM chip\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ls_pwm_atim_suspend(struct device *dev)
|
||||
{
|
||||
struct pwm_chip *chip = dev_get_drvdata(dev);
|
||||
struct pwm_loongson_ddata *ddata = to_pwm_loongson_ddata(chip);
|
||||
|
||||
ddata->lss.ccer_reg = pwm_loongson_readl(ddata, ATIM_CCER);
|
||||
ddata->lss.ccr_reg[0] = pwm_loongson_readl(ddata, ATIM_CCR(0));
|
||||
ddata->lss.ccr_reg[1] = pwm_loongson_readl(ddata, ATIM_CCR(1));
|
||||
ddata->lss.ccr_reg[2] = pwm_loongson_readl(ddata, ATIM_CCR(2));
|
||||
ddata->lss.ccr_reg[3] = pwm_loongson_readl(ddata, ATIM_CCR(3));
|
||||
ddata->lss.arr_reg = pwm_loongson_readl(ddata, ATIM_ARR);
|
||||
|
||||
clk_disable_unprepare(ddata->clk);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ls_pwm_atim_resume(struct device *dev)
|
||||
{
|
||||
int ret;
|
||||
struct pwm_chip *chip = dev_get_drvdata(dev);
|
||||
struct pwm_loongson_ddata *ddata = to_pwm_loongson_ddata(chip);
|
||||
|
||||
ret = clk_prepare_enable(ddata->clk);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
pwm_loongson_writel(ddata, ddata->lss.ccer_reg, ATIM_CCER);
|
||||
pwm_loongson_writel(ddata, ddata->lss.ccr_reg[0], ATIM_CCR(0));
|
||||
pwm_loongson_writel(ddata, ddata->lss.ccr_reg[1], ATIM_CCR(1));
|
||||
pwm_loongson_writel(ddata, ddata->lss.ccr_reg[2], ATIM_CCR(2));
|
||||
pwm_loongson_writel(ddata, ddata->lss.ccr_reg[3], ATIM_CCR(3));
|
||||
pwm_loongson_writel(ddata, ddata->lss.arr_reg, ATIM_ARR);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static DEFINE_SIMPLE_DEV_PM_OPS(ls_pwm_atim_pm_ops, ls_pwm_atim_suspend,
|
||||
ls_pwm_atim_resume);
|
||||
|
||||
static struct of_device_id ls_pwm_atim_id_table[] = {
|
||||
{ .compatible = "loongson,ls2k-pwm-atim" },
|
||||
{ /* sentinel */ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, ls_pwm_atim_id_table);
|
||||
|
||||
static struct platform_driver ls_pwm_atim_driver = {
|
||||
.driver = {
|
||||
.name = "ls-pwm-atim",
|
||||
.pm = pm_ptr(&ls_pwm_atim_pm_ops),
|
||||
.of_match_table = of_match_ptr(ls_pwm_atim_id_table),
|
||||
},
|
||||
.probe = ls_pwm_atim_probe,
|
||||
};
|
||||
module_platform_driver(ls_pwm_atim_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Loongson Atimer Pwm Driver");
|
||||
MODULE_AUTHOR("Ilikara <3435193369@qq.com>");
|
||||
MODULE_LICENSE("GPL");
|
||||
@@ -1,367 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Copyright (C) 2024 by ilikara 3435193369@qq.com.
|
||||
*
|
||||
* Loongson GTIM PWM driver
|
||||
*
|
||||
* For Loongson's GTIM IP block documentation please refer Chapter 19 of
|
||||
* Reference Manual: https://loongson.cn/uploads/images/2024120211205269050.%E9%BE%99%E8%8A%AF2K0300%E5%A4%84%E7%90%86%E5%99%A8%E7%94%A8%E6%88%B7%E6%89%8B%E5%86%8C_V1.0.pdf
|
||||
*
|
||||
* Author: Ilikara <3435193369@qq.com>
|
||||
*
|
||||
* Limitations:
|
||||
* - GTIM_CNT will be set to 0 when ls_pwm_gtim_config is called.
|
||||
* - All the 4 channels share the same period.
|
||||
*/
|
||||
|
||||
#include <linux/acpi.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/pwm.h>
|
||||
#include <linux/units.h>
|
||||
#include <linux/delay.h>
|
||||
|
||||
/* counter offest */
|
||||
#define GTIM_CR1 0x00
|
||||
#define GTIM_CR2 0x04
|
||||
#define GTIM_SMCR 0x08
|
||||
#define GTIM_DIER 0x0C
|
||||
#define GTIM_SR 0x10
|
||||
#define GTIM_EGR 0x14
|
||||
#define GTIM_CCMR(n) 0x18 + ((n) / 2) * 0x04
|
||||
#define GTIM_CCER 0x20
|
||||
#define GTIM_CNT 0x24
|
||||
#define GTIM_PSC 0x28
|
||||
#define GTIM_ARR 0x2C
|
||||
#define GTIM_CCR(n) 0x34 + (n) * 0x04
|
||||
#define GTIM_INSTA 0x50
|
||||
|
||||
/* CR1 each bit */
|
||||
#define CR1_CEN BIT(0)
|
||||
|
||||
/* EGR each bit */
|
||||
#define EGR_UG BIT(0)
|
||||
|
||||
/* CCMR each bit */
|
||||
#define CCMR_CCnS(n) BIT((n) % 2 * 8 + 0)
|
||||
#define CCMR_OCnFE(n) BIT((n) % 2 * 8 + 2)
|
||||
#define CCMR_OCnPE(n) BIT((n) % 2 * 8 + 3)
|
||||
#define CCMR_OCnM(n) BIT((n) % 2 * 8 + 4)
|
||||
#define CCMR_OCnCE(n) BIT((n) % 2 * 8 + 7)
|
||||
|
||||
/* CCER each bit */
|
||||
#define CCER_CCnE(n) BIT((n) * 4 + 0)
|
||||
#define CCER_CCnP(n) BIT((n) * 4 + 1)
|
||||
|
||||
/* default input clk frequency for the ACPI case */
|
||||
#define LOONGSON_PWM_FREQ_DEFAULT 50000000 /* Hz */
|
||||
|
||||
struct pwm_loongson_suspend_store {
|
||||
u32 arr_reg;
|
||||
u32 ccr_reg[4];
|
||||
u32 ccer_reg;
|
||||
u32 en_mark;
|
||||
};
|
||||
|
||||
struct pwm_loongson_ddata {
|
||||
struct clk *clk;
|
||||
void __iomem *base;
|
||||
u64 clk_rate;
|
||||
struct pwm_loongson_suspend_store lss;
|
||||
};
|
||||
|
||||
static inline struct pwm_loongson_ddata *
|
||||
to_pwm_loongson_ddata(struct pwm_chip *chip)
|
||||
{
|
||||
return pwmchip_get_drvdata(chip);
|
||||
}
|
||||
|
||||
static inline u32 pwm_loongson_readl(struct pwm_loongson_ddata *ddata,
|
||||
u32 offset)
|
||||
{
|
||||
return readl(ddata->base + offset);
|
||||
}
|
||||
|
||||
static inline void pwm_loongson_writel(struct pwm_loongson_ddata *ddata,
|
||||
u32 val, u32 offset)
|
||||
{
|
||||
writel(val, ddata->base + offset);
|
||||
}
|
||||
|
||||
static int ls_pwm_gtim_set_polarity(struct pwm_chip *chip,
|
||||
struct pwm_device *pwm,
|
||||
enum pwm_polarity polarity)
|
||||
{
|
||||
u16 val;
|
||||
struct pwm_loongson_ddata *ddata = to_pwm_loongson_ddata(chip);
|
||||
|
||||
val = pwm_loongson_readl(ddata, GTIM_CCER);
|
||||
|
||||
if (polarity == PWM_POLARITY_INVERSED)
|
||||
/* Duty cycle defines LOW period of PWM */
|
||||
val &= ~CCER_CCnP(pwm->hwpwm);
|
||||
else
|
||||
/* Duty cycle defines HIGH period of PWM */
|
||||
val |= CCER_CCnP(pwm->hwpwm);
|
||||
|
||||
pwm_loongson_writel(ddata, val, GTIM_CCER);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void ls_pwm_gtim_disable(struct pwm_chip *chip, struct pwm_device *pwm)
|
||||
{
|
||||
struct pwm_loongson_ddata *ddata = to_pwm_loongson_ddata(chip);
|
||||
u32 val;
|
||||
|
||||
if (pwm->state.polarity == PWM_POLARITY_NORMAL)
|
||||
pwm_loongson_writel(ddata, ddata->lss.arr_reg,
|
||||
GTIM_CCR(pwm->hwpwm));
|
||||
else if (pwm->state.polarity == PWM_POLARITY_INVERSED)
|
||||
pwm_loongson_writel(ddata, 0, GTIM_CCR(pwm->hwpwm));
|
||||
|
||||
val = pwm_loongson_readl(ddata, GTIM_CCMR(pwm->hwpwm));
|
||||
val &= ~(0b111 * CCMR_OCnM(pwm->hwpwm));
|
||||
pwm_loongson_writel(ddata, val, GTIM_CCMR(pwm->hwpwm));
|
||||
|
||||
val = pwm_loongson_readl(ddata, GTIM_CCER);
|
||||
val &= ~CCER_CCnE(pwm->hwpwm);
|
||||
pwm_loongson_writel(ddata, val, GTIM_CCER);
|
||||
|
||||
ddata->lss.en_mark &= ~BIT(pwm->hwpwm);
|
||||
if (ddata->lss.en_mark == 0b0000) {
|
||||
val = pwm_loongson_readl(ddata, GTIM_CR1);
|
||||
val &= ~CR1_CEN;
|
||||
pwm_loongson_writel(ddata, val, GTIM_CR1);
|
||||
pwm_loongson_writel(ddata, 0x0, GTIM_CNT);
|
||||
}
|
||||
}
|
||||
|
||||
static int ls_pwm_gtim_enable(struct pwm_chip *chip, struct pwm_device *pwm)
|
||||
{
|
||||
u32 val;
|
||||
struct pwm_loongson_ddata *ddata = to_pwm_loongson_ddata(chip);
|
||||
|
||||
pwm_loongson_writel(ddata, ddata->lss.ccr_reg[pwm->hwpwm % 4],
|
||||
GTIM_CCR(pwm->hwpwm));
|
||||
pwm_loongson_writel(ddata, ddata->lss.arr_reg, GTIM_ARR);
|
||||
|
||||
// todo:类似config函数中的特殊处理
|
||||
val = pwm_loongson_readl(ddata, GTIM_CCMR(pwm->hwpwm));
|
||||
val |= 0b111 * CCMR_OCnM(pwm->hwpwm);
|
||||
pwm_loongson_writel(ddata, val, GTIM_CCMR(pwm->hwpwm));
|
||||
|
||||
val = pwm_loongson_readl(ddata, GTIM_CCER);
|
||||
val |= CCER_CCnE(pwm->hwpwm);
|
||||
pwm_loongson_writel(ddata, val, GTIM_CCER);
|
||||
|
||||
if (ddata->lss.en_mark == 0b0000) {
|
||||
pwm_loongson_writel(ddata, 0x0, GTIM_CNT);
|
||||
val = pwm_loongson_readl(ddata, GTIM_CR1);
|
||||
val |= CR1_CEN;
|
||||
pwm_loongson_writel(ddata, val, GTIM_CR1);
|
||||
}
|
||||
ddata->lss.en_mark |= BIT(pwm->hwpwm);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ls_pwm_gtim_config(struct pwm_chip *chip, struct pwm_device *pwm,
|
||||
int duty_ns, int period_ns)
|
||||
{
|
||||
u32 duty, period;
|
||||
struct pwm_loongson_ddata *ddata = to_pwm_loongson_ddata(chip);
|
||||
|
||||
/* duty = duty_ns * ddata->clk_rate / NSEC_PER_SEC */
|
||||
duty = mul_u64_u64_div_u64(duty_ns, ddata->clk_rate, NSEC_PER_SEC);
|
||||
pwm_loongson_writel(ddata, duty, GTIM_CCR(pwm->hwpwm));
|
||||
|
||||
/* period = period_ns * ddata->clk_rate / NSEC_PER_SEC */
|
||||
period = mul_u64_u64_div_u64(period_ns, ddata->clk_rate, NSEC_PER_SEC);
|
||||
pwm_loongson_writel(ddata, period, GTIM_ARR);
|
||||
|
||||
pwm_loongson_writel(ddata, 0, GTIM_CNT);
|
||||
|
||||
ddata->lss.ccr_reg[pwm->hwpwm] = duty;
|
||||
ddata->lss.arr_reg = period;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ls_pwm_gtim_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
||||
const struct pwm_state *state)
|
||||
{
|
||||
int ret;
|
||||
u64 period, duty_cycle;
|
||||
bool enabled = pwm->state.enabled;
|
||||
|
||||
if (!state->enabled) {
|
||||
if (enabled)
|
||||
ls_pwm_gtim_disable(chip, pwm);
|
||||
return 0;
|
||||
}
|
||||
|
||||
ret = ls_pwm_gtim_set_polarity(chip, pwm, state->polarity);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
period = min(state->period, NSEC_PER_SEC);
|
||||
duty_cycle = min(state->duty_cycle, NSEC_PER_SEC);
|
||||
|
||||
ret = ls_pwm_gtim_config(chip, pwm, state->duty_cycle, state->period);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
if (!enabled && state->enabled)
|
||||
ret = ls_pwm_gtim_enable(chip, pwm);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int ls_pwm_gtim_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
|
||||
struct pwm_state *state)
|
||||
{
|
||||
u32 arr_reg, ccr_reg, ccer_reg;
|
||||
struct pwm_loongson_ddata *ddata = to_pwm_loongson_ddata(chip);
|
||||
|
||||
arr_reg = pwm_loongson_readl(ddata, GTIM_ARR);
|
||||
ccr_reg = pwm_loongson_readl(ddata, GTIM_CCR(pwm->hwpwm));
|
||||
ccer_reg = pwm_loongson_readl(ddata, GTIM_CCER);
|
||||
|
||||
/* duty & period have a max of 2^32, so we can't overflow */
|
||||
state->duty_cycle = DIV64_U64_ROUND_UP((u64)ccr_reg * NSEC_PER_SEC,
|
||||
ddata->clk_rate);
|
||||
state->period = DIV64_U64_ROUND_UP((u64)arr_reg * NSEC_PER_SEC,
|
||||
ddata->clk_rate);
|
||||
state->polarity = (ccer_reg & CCER_CCnP(pwm->hwpwm)) ?
|
||||
PWM_POLARITY_INVERSED :
|
||||
PWM_POLARITY_NORMAL;
|
||||
state->enabled = (ccer_reg & CCER_CCnE(pwm->hwpwm)) ? true : false;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct pwm_ops ls_pwm_gtim_ops = {
|
||||
.apply = ls_pwm_gtim_apply,
|
||||
.get_state = ls_pwm_gtim_get_state,
|
||||
};
|
||||
|
||||
static int ls_pwm_gtim_probe(struct platform_device *pdev)
|
||||
{
|
||||
int ret;
|
||||
struct pwm_chip *chip;
|
||||
struct pwm_loongson_ddata *ddata;
|
||||
struct device *dev = &pdev->dev;
|
||||
struct device_node *np = dev->of_node;
|
||||
u32 of_clk_freq = 0;
|
||||
|
||||
chip = devm_pwmchip_alloc(dev, 4, sizeof(*ddata));
|
||||
if (IS_ERR(chip))
|
||||
return PTR_ERR(chip);
|
||||
ddata = to_pwm_loongson_ddata(chip);
|
||||
|
||||
ddata->lss.en_mark = 0b00000000;
|
||||
|
||||
ddata->base = devm_platform_ioremap_resource(pdev, 0);
|
||||
if (IS_ERR(ddata->base))
|
||||
return PTR_ERR(ddata->base);
|
||||
|
||||
ddata->clk = devm_clk_get_optional_enabled(dev, NULL);
|
||||
if (IS_ERR(ddata->clk))
|
||||
return dev_err_probe(dev, PTR_ERR(ddata->clk),
|
||||
"failed to get pwm clock\n");
|
||||
ddata->clk_rate = LOONGSON_PWM_FREQ_DEFAULT;
|
||||
if (ddata->clk) {
|
||||
ret = devm_clk_rate_exclusive_get(dev, ddata->clk);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ddata->clk_rate = clk_get_rate(ddata->clk);
|
||||
} else {
|
||||
#ifdef CONFIG_OF
|
||||
if (!of_property_read_u32(np, "clock-frequency", &of_clk_freq))
|
||||
ddata->clk_rate = of_clk_freq;
|
||||
#endif
|
||||
}
|
||||
|
||||
/* Explicitly initialize the CCER register */
|
||||
pwm_loongson_writel(ddata, 0, GTIM_CCER);
|
||||
|
||||
/* Additional configuration for GTIM */
|
||||
pwm_loongson_writel(ddata, EGR_UG, GTIM_EGR);
|
||||
|
||||
chip->ops = &ls_pwm_gtim_ops;
|
||||
chip->atomic = true;
|
||||
dev_set_drvdata(dev, chip);
|
||||
|
||||
ret = devm_pwmchip_add(dev, chip);
|
||||
if (ret < 0)
|
||||
return dev_err_probe(dev, ret, "failed to add PWM chip\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ls_pwm_gtim_suspend(struct device *dev)
|
||||
{
|
||||
struct pwm_chip *chip = dev_get_drvdata(dev);
|
||||
struct pwm_loongson_ddata *ddata = to_pwm_loongson_ddata(chip);
|
||||
|
||||
ddata->lss.ccer_reg = pwm_loongson_readl(ddata, GTIM_CCER);
|
||||
ddata->lss.ccr_reg[0] = pwm_loongson_readl(ddata, GTIM_CCR(0));
|
||||
ddata->lss.ccr_reg[1] = pwm_loongson_readl(ddata, GTIM_CCR(1));
|
||||
ddata->lss.ccr_reg[2] = pwm_loongson_readl(ddata, GTIM_CCR(2));
|
||||
ddata->lss.ccr_reg[3] = pwm_loongson_readl(ddata, GTIM_CCR(3));
|
||||
ddata->lss.arr_reg = pwm_loongson_readl(ddata, GTIM_ARR);
|
||||
|
||||
clk_disable_unprepare(ddata->clk);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ls_pwm_gtim_resume(struct device *dev)
|
||||
{
|
||||
int ret;
|
||||
struct pwm_chip *chip = dev_get_drvdata(dev);
|
||||
struct pwm_loongson_ddata *ddata = to_pwm_loongson_ddata(chip);
|
||||
|
||||
ret = clk_prepare_enable(ddata->clk);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
pwm_loongson_writel(ddata, ddata->lss.ccer_reg, GTIM_CCER);
|
||||
pwm_loongson_writel(ddata, ddata->lss.ccr_reg[0], GTIM_CCR(0));
|
||||
pwm_loongson_writel(ddata, ddata->lss.ccr_reg[1], GTIM_CCR(1));
|
||||
pwm_loongson_writel(ddata, ddata->lss.ccr_reg[2], GTIM_CCR(2));
|
||||
pwm_loongson_writel(ddata, ddata->lss.ccr_reg[3], GTIM_CCR(3));
|
||||
pwm_loongson_writel(ddata, ddata->lss.arr_reg, GTIM_ARR);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static DEFINE_SIMPLE_DEV_PM_OPS(ls_pwm_gtim_pm_ops, ls_pwm_gtim_suspend,
|
||||
ls_pwm_gtim_resume);
|
||||
|
||||
static struct of_device_id ls_pwm_gtim_id_table[] = {
|
||||
{ .compatible = "loongson,ls2k-pwm-gtim" },
|
||||
{ /* sentinel */ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, ls_pwm_gtim_id_table);
|
||||
|
||||
static struct platform_driver ls_pwm_gtim_driver = {
|
||||
.driver = {
|
||||
.name = "ls-pwm-gtim",
|
||||
.pm = pm_ptr(&ls_pwm_gtim_pm_ops),
|
||||
.of_match_table = of_match_ptr(ls_pwm_gtim_id_table),
|
||||
},
|
||||
.probe = ls_pwm_gtim_probe,
|
||||
};
|
||||
module_platform_driver(ls_pwm_gtim_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Loongson Gtimer Pwm Driver");
|
||||
MODULE_AUTHOR("Ilikara <3435193369@qq.com>");
|
||||
MODULE_LICENSE("GPL");
|
||||
Reference in New Issue
Block a user