compatible
Document the clock controller shipped in Loongson-2K0300 SoC, which
generates various clock signals for SoC peripherals. Differing from
previous generations of SoCs, LS2K0300 requires a 120MHz external clock
input.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add missing address-cells 0 to the Local I/O, Extend I/O and PCH-PIC
Interrupt Controller node to silence W=1 warning:
loongson-2k2000.dtsi:364.5-49: Warning (interrupt_map): /bus@10000000/pcie@1a000000/pcie@9,0:interrupt-map:
Missing property '#address-cells' in node /bus@10000000/interrupt-controller@10000000, using 0 as fallback
Value '0' is correct because:
1. The LIO/EIO/PCH interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Cc: stable@vger.kernel.org
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Add missing address-cells 0 to the Local I/O interrupt controller node
to silence W=1 warning:
loongson-2k1000.dtsi:498.5-55: Warning (interrupt_map): /bus@10000000/pcie@1a000000/pcie@9,0:interrupt-map:
Missing property '#address-cells' in node /bus@10000000/interrupt-controller@1fe01440, using 0 as fallback
Value '0' is correct because:
1. The Local I/O interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Cc: stable@vger.kernel.org
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Add missing address-cells 0 to the Local I/O and Extend I/O interrupt
controller node to silence W=1 warning:
loongson-2k0500.dtsi:513.5-51: Warning (interrupt_map): /bus@10000000/pcie@1a000000/pcie@0,0:interrupt-map:
Missing property '#address-cells' in node /bus@10000000/interrupt-controller@1fe11600, using 0 as fallback
Value '0' is correct because:
1. The Local I/O & Extend I/O interrupt controller do not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Cc: stable@vger.kernel.org
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
SoC integrated peripherals on LS2K1000 and LS2K2000 could be discovered
as PCI devices, but require sideband interrupts to function, which are
previously described by interrupts and interrupt-parent properties.
However, pci/pci-device.yaml allows interrupts property to only specify
PCI INTx interrupts, not sideband ones. Convert these devices to use
interrupt-extended property, which describes sideband interrupts used by
PCI devices since dt-schema commit e6ea659d2baa ("schemas: pci-device:
Allow interrupts-extended for sideband interrupts"), eliminating
dtbs_check warnings.
Cc: stable@vger.kernel.org
Fixes: 30a5532a3206 ("LoongArch: dts: DeviceTree for Loongson-2K1000")
Signed-off-by: Yao Zi <me@ziyao.cc>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
An extra blank line gets printed after printing firmware version
because the build date is null terminated. Remove the "\n" from
dev_info() calls to print firmware version and build date to fix
the problem.
Reported-by: Mario Limonciello <superm1@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Ensure that in the ftrace direct call logic, the CPU register state
(with ra = parent return address) is restored to the correct state after
the execution of the custom trampoline function and before returning to
the traced function. Additionally, guarantee the correctness of the jump
logic for jr t0 (traced function address).
Cc: stable@vger.kernel.org
Fixes: 9cdc3b6a299c ("LoongArch: ftrace: Add direct call support")
Reported-by: Youling Tang <tangyouling@kylinos.cn>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Remove the previous restrictions that blocked the tracing of kernel
module functions. Fix the issue that previously caused kernel lockups
when attempting to trace module functions.
Before entering the trampoline code, the return address register ra
shall store the address of the next assembly instruction after the
'bl trampoline' instruction, which is the traced function address, and
the register t0 shall store the parent function return address. Refine
the trampoline return logic to ensure that register data remains correct
when returning to both the traced function and the parent function.
Before this patch was applied, the module_attach test in selftests/bpf
encountered a deadlock issue. This was caused by an incorrect jump
address after the trampoline execution, which resulted in an infinite
loop within the module function.
Cc: stable@vger.kernel.org
Fixes: 677e6123e3d2 ("LoongArch: BPF: Disable trampoline for kernel module function trace")
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Call the next bpf prog and skip the first instruction of TCC
initialization.
A total of 7 instructions are skipped:
'move t0, ra' 1 inst
'move_imm + jirl' 5 inst
'addid REG_TCC, zero, 0' 1 inst
Relevant test cases: the tailcalls test item in selftests/bpf.
Cc: stable@vger.kernel.org
Fixes: 677e6123e3d2 ("LoongArch: BPF: Disable trampoline for kernel module function trace")
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Modify the build_prologue() function to ensure the return address
register ra is saved to t0 before entering trampoline operations.
This change ensures the accurate return address handling when a BPF
program calls another BPF program, preventing errors in the BPF-to-BPF
call chain.
Cc: stable@vger.kernel.org
Fixes: 677e6123e3d2 ("LoongArch: BPF: Disable trampoline for kernel module function trace")
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The kfunc calls are native calls so they should follow LoongArch calling
conventions. Sign extend its arguments properly to avoid kernel panic.
This is done by adding a new emit_abi_ext() helper. The emit_abi_ext()
helper performs extension in place meaning a value already store in the
target register (Note: this is different from the existing sign_extend()
helper and thus we can't reuse it).
Cc: stable@vger.kernel.org
Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support")
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Refactor the register restoration sequence in the ftrace_common_return
function to clearly distinguish between the logic of normal returns and
direct call returns in function tracing scenarios. The logic is as
follows:
1. In the case of a normal return, the execution flow returns to the
traced function, and ftrace must ensure that the register data is
consistent with the state when the function was entered.
ra = parent return address; t0 = traced function return address.
2. In the case of a direct call return, the execution flow jumps to the
custom trampoline function, and ftrace must ensure that the register
data is consistent with the state when ftrace was entered.
ra = traced function return address; t0 = parent return address.
Cc: stable@vger.kernel.org
Fixes: 9cdc3b6a299c ("LoongArch: ftrace: Add direct call support")
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
tao89959