An extra blank line gets printed after printing firmware version
because the build date is null terminated. Remove the "\n" from
dev_info() calls to print firmware version and build date to fix
the problem.
Reported-by: Mario Limonciello <superm1@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
In the majority, if not all cases, mac_interface and phy_interface
are the same with the exception of some drivers that I have suggested
only use phy_interface and set mac_interface to PHY_INTERFACE_MODE_NA.
The only two that currently set mac_interface to PHY_INTERFACE_MODE_NA
are dwmac-loongson and dwmac-lpc18xx, neither of which use RGMII nor
SGMII.
In order to phase out the use of mac_interface, we need to have a path
for existing drivers so they can update to only using phy_interface
without causing regressions.
Therefore, in order to keep the "pcs" code working, we need to choose
the STMMAC integrated PCS mode based on phy_interface if mac_interface
is PHY_INTERFACE_MODE_NA.
This will allow more drivers to set mac_interface to
PHY_INTERFACE_MODE_NA without risking regressions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uytpG-00000006H29-1Ltk@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
If the MAC controller does not connect to any PHY interface, there is a
missing clock, then the DMA reset fails.
For this case, the DMA_BUS_MODE_SFT_RESET bit is 1 before software reset,
just print an error message which gives a hint the PHY clock is missing,
and then return -EINVAL immediately to avoid waiting for the timeout when
the DMA reset fails in loongson_dwmac_fix_reset().
With this patch, for the normal end user, the computer start faster with
reducing boot time for 2 seconds on the specified mainboard.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://patch.msgid.link/20250811073506.27513-4-yangtiezhu@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Add a new multi-chan IP core (0x12) support which is used in Loongson-
2K3000/Loongson-3B6000M. Compared with the 0x10 core, the new 0x12 core
reduces channel numbers from 8 to 4, but checksum is supported for all
channels.
Add a "multichan" flag to loongson_data, so that we can simply use a
"if (ld->multichan)" condition rather than the complicated condition
"if (ld->loongson_id == DWMAC_CORE_MULTICHAN_V1 || ld->loongson_id ==
DWMAC_CORE_MULTICHAN_V2)".
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Henry Chen <chenx97@aosc.io>
Tested-by: Biao Dong <dongbiao@loongson.cn>
Signed-off-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Link: https://patch.msgid.link/20250424072209.3134762-3-chenhuacai@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Functions prefixed with "pcim_" are managed devres functions which
perform automatic cleanup once the driver unloads. It is, thus, not
necessary to call any cleanup functions in remove() callbacks.
Remove the pcim_ cleanup function calls in the remove() callbacks.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Tested-by: Henry Chen <chenx97@aosc.io>
loongson_dwmac_probe() contains a loop which doesn't have an effect,
because it tries to call pcim_iomap_regions() with the same parameters
several times. The break statement at the loop's end furthermore ensures
that the loop only runs once anyways.
Remove the surplus loop.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Tested-by: Henry Chen <chenx97@aosc.io>
pcim_iomap_regions() should receive the driver's name as its third
parameter, not the PCI device's name.
Define the driver name with a macro and use it at the appropriate
places, including pcim_iomap_regions().
Cc: stable@vger.kernel.org # v5.14+
Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Tested-by: Henry Chen <chenx97@aosc.io>
The size of DMA descriptors is 32 bytes at most.
net_prefetch() for received frames, and keep prefetch() for descriptors.
This patch brings ~4.8% driver performance improvement in a TCP RX
throughput test with iPerf tool on a single isolated Cortex-A65 CPU
core, 2.92 Gbits/sec increased to 3.06 Gbits/sec.
Suggested-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Current code prefetches cache lines for the received frame first, and
then dma_sync_single_for_cpu() against this frame, this is wrong.
Cache prefetch should be triggered after dma_sync_single_for_cpu().
This patch brings ~2.8% driver performance improvement in a TCP RX
throughput test with iPerf tool on a single isolated Cortex-A65 CPU
core, 2.84 Gbits/sec increased to 2.92 Gbits/sec.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Shuah Khan