When compiling with LLVM and CONFIG_LTO_CLANG is set, there exist many
objtool warnings "sibling call from callable instruction with modified
stack frame".
For this special case, the related object file shows that there is no
generated relocation section '.rela.discard.tablejump_annotate' for the
table jump instruction jirl, thus objtool can not know that what is the
actual destination address.
It needs to do something on the LLVM side to make sure that there is the
relocation section '.rela.discard.tablejump_annotate' if LTO is enabled,
but in order to maintain compatibility for the current LLVM compiler,
this can be done in the kernel Makefile for now. Ensure it is aware of
linker with LTO, '--loongarch-annotate-tablejump' needs to be passed via
'-mllvm' to ld.lld.
Note that it should also pass the compiler option -mannotate-tablejump
rather than only pass '-mllvm --loongarch-annotate-tablejump' to ld.lld
if LTO is enabled, otherwise there are no jump info for some table jump
instructions.
Fixes: e20ab7d454ee ("LoongArch: Enable jump table for objtool")
Closes: https://lore.kernel.org/loongarch/20250731175655.GA1455142@ax162/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Co-developed-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Commit 57fbad15c2eee772 ("stackleak: Rename STACKLEAK to KSTACK_ERASE")
misses the stackframe.h part for LoongArch, so fix it.
Fixes: 57fbad15c2eee772 ("stackleak: Rename STACKLEAK to KSTACK_ERASE")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Now if preemption happens between protected_save_fpu_context() and
protected_save_lbt_context(), FTOP context is lost. Because FTOP is
saved by protected_save_lbt_context() but protected_save_fpu_context()
disables TM before that. So save LBT before FPU in setup_sigcontext()
to avoid this potential risk.
Signed-off-by: Hanlu Li <lihanlu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
When enabling CONFIG_KASAN, CONFIG_PREEMPT_VOLUNTARY_BUILD and
CONFIG_PREEMPT_VOLUNTARY at the same time, there will be soft deadlock,
the relevant logs are as follows:
rcu: INFO: rcu_sched self-detected stall on CPU
...
Call Trace:
[<900000000024f9e4>] show_stack+0x5c/0x180
[<90000000002482f4>] dump_stack_lvl+0x94/0xbc
[<9000000000224544>] rcu_dump_cpu_stacks+0x1fc/0x280
[<900000000037ac80>] rcu_sched_clock_irq+0x720/0xf88
[<9000000000396c34>] update_process_times+0xb4/0x150
[<90000000003b2474>] tick_nohz_handler+0xf4/0x250
[<9000000000397e28>] __hrtimer_run_queues+0x1d0/0x428
[<9000000000399b2c>] hrtimer_interrupt+0x214/0x538
[<9000000000253634>] constant_timer_interrupt+0x64/0x80
[<9000000000349938>] __handle_irq_event_percpu+0x78/0x1a0
[<9000000000349a78>] handle_irq_event_percpu+0x18/0x88
[<9000000000354c00>] handle_percpu_irq+0x90/0xf0
[<9000000000348c74>] handle_irq_desc+0x94/0xb8
[<9000000001012b28>] handle_cpu_irq+0x68/0xa0
[<9000000001def8c0>] handle_loongarch_irq+0x30/0x48
[<9000000001def958>] do_vint+0x80/0xd0
[<9000000000268a0c>] kasan_mem_to_shadow.part.0+0x2c/0x2a0
[<90000000006344f4>] __asan_load8+0x4c/0x120
[<900000000025c0d0>] module_frob_arch_sections+0x5c8/0x6b8
[<90000000003895f0>] load_module+0x9e0/0x2958
[<900000000038b770>] __do_sys_init_module+0x208/0x2d0
[<9000000001df0c34>] do_syscall+0x94/0x190
[<900000000024d6fc>] handle_syscall+0xbc/0x158
After analysis, this is because the slow speed of loading the amdgpu
module leads to the long time occupation of the cpu and then the soft
deadlock.
When loading a module, module_frob_arch_sections() tries to figure out
the number of PLTs/GOTs that will be needed to handle all the RELAs. It
will call the count_max_entries() to find in an out-of-order date which
counting algorithm has O(n^2) complexity.
To make it faster, we sort the relocation list by info and addend. That
way, to check for a duplicate relocation, it just needs to compare with
the previous entry. This reduces the complexity of the algorithm to O(n
log n), as done in commit d4e0340919fb ("arm64/module: Optimize module
load time by optimizing PLT counting"). This gives sinificant reduction
in module load time for modules with large number of relocations.
After applying this patch, the soft deadlock problem has been solved,
and the kernel starts normally without "Call Trace".
Using the default configuration to test some modules, the results are as
follows:
Module Size
ip_tables 36K
fat 143K
radeon 2.5MB
amdgpu 16MB
Without this patch:
Module Module load time (ms) Count(PLTs/GOTs)
ip_tables 18 59/6
fat 0 162/14
radeon 54 1221/84
amdgpu 1411 4525/1098
With this patch:
Module Module load time (ms) Count(PLTs/GOTs)
ip_tables 18 59/6
fat 0 162/14
radeon 22 1221/84
amdgpu 45 4525/1098
Fixes: fcdfe9d22bed ("LoongArch: Add ELF and module support")
Signed-off-by: Kanglong Wang <wangkanglong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
When the CPU is offline, the timer of LoongArch is not correctly closed.
This is harmless for real machines, but resulting in an excessively high
cpu usage rate of the offline vCPU thread in the virtual machines.
To correctly close the timer, we have made the following modifications:
Register the cpu hotplug event (CPUHP_AP_LOONGARCH_ARCH_TIMER_STARTING)
for LoongArch. This event's hooks will be called to close the timer when
the CPU is offline.
Clear the timer interrupt when the timer is turned off. Since before the
timer is turned off, there may be a timer interrupt that has already been
in the pending state due to the interruption of the disabled, which also
affects the halt state of the offline vCPU.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
JITs can set bpf_jit_bypass_spec_v1/v4() if they want the verifier to
skip analysis/patching for the respective vulnerability, it is safe to
set both bpf_jit_bypass_spec_v1/v4(), because there is no speculation
barrier instruction for LoongArch.
Suggested-by: Luis Gerhorst <luis.gerhorst@fau.de>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
In specific use cases combining tailcalls and BPF-to-BPF calls，
MAX_TAIL_CALL_CNT won't work because of missing tail_call_cnt
back-propagation from callee to caller. This patch fixes this
tailcall issue caused by abusing the tailcall in bpf2bpf feature
on LoongArch like the way of "bpf, x64: Fix tailcall hierarchy".
Push tail_call_cnt_ptr and tail_call_cnt into the stack,
tail_call_cnt_ptr is passed between tailcall and bpf2bpf,
uses tail_call_cnt_ptr to increment tail_call_cnt.
Fixes: bb035ef0cc91 ("LoongArch: BPF: Support mixing bpf2bpf and tailcalls")
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Haoran Jiang <jianghaoran@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Use BPF_TRAMP_F_INDIRECT flag to detect struct ops and emit proper
prologue and epilogue for this case.
With this patch, all of the struct_ops related testcases (except
struct_ops_multi_pages) passed on LoongArch.
The testcase struct_ops_multi_pages failed is because the actual
image_pages_cnt is 40 which is bigger than MAX_TRAMP_IMAGE_PAGES.
Before:
$ sudo ./test_progs -t struct_ops -d struct_ops_multi_pages
...
WATCHDOG: test case struct_ops_module/struct_ops_load executes for 10 seconds...
After:
$ sudo ./test_progs -t struct_ops -d struct_ops_multi_pages
...
#15 bad_struct_ops:OK
...
#399 struct_ops_autocreate:OK
...
#400 struct_ops_kptr_return:OK
...
#401 struct_ops_maybe_null:OK
...
#402 struct_ops_module:OK
...
#404 struct_ops_no_cfi:OK
...
#405 struct_ops_private_stack:SKIP
...
#406 struct_ops_refcounted:OK
Summary: 8/25 PASSED, 3 SKIPPED, 0 FAILED
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
BPF trampoline is the critical infrastructure of the BPF subsystem,
acting as a mediator between kernel functions and BPF programs. Numerous
important features, such as using BPF program for zero overhead kernel
introspection, rely on this key component.
The related tests have passed, including the following technical points:
1. fentry
2. fmod_ret
3. fexit
The following related testcases passed on LoongArch:
sudo ./test_progs -a fentry_test/fentry
sudo ./test_progs -a fexit_test/fexit
sudo ./test_progs -a fentry_fexit
sudo ./test_progs -a modify_return
sudo ./test_progs -a fexit_sleep
sudo ./test_progs -a test_overhead
sudo ./test_progs -a trampoline_count
This issue was first reported by Geliang Tang in June 2024 while
debugging MPTCP BPF selftests on a LoongArch machine (see commit
eef0532e900c "selftests/bpf: Null checks for links in bpf_tcp_ca").
Geliang, Huacai, and Tiezhu then worked together to drive the
implementation of this feature, encouraging broader collaboration among
Chinese kernel engineers.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507100034.wXofj6VX-lkp@intel.com/
Reported-by: Geliang Tang <geliang@kernel.org>
Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Tested-by: Vincent Li <vincent.mc.li@gmail.com>
Co-developed-by: George Guo <guodongtai@kylinos.cn>
Signed-off-by: George Guo <guodongtai@kylinos.cn>
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
This commit adds support for BPF dynamic code modification on the
LoongArch architecture:
1. Add bpf_arch_text_copy() for instruction block copying.
2. Add bpf_arch_text_poke() for runtime instruction patching.
3. Add bpf_arch_text_invalidate() for code invalidation.
On LoongArch, since symbol addresses in the direct mapping region can't
be reached via relative jump instructions from the paged mapping region,
we use the move_imm+jirl instruction pair as absolute jump instructions.
These require 2-5 instructions, so we reserve 5 NOP instructions in the
program as placeholders for function jumps.
The larch_insn_text_copy() function is solely used for BPF. And the use
of larch_insn_text_copy() requires PAGE_SIZE alignment. Currently, only
the size of the BPF trampoline is page-aligned.
Co-developed-by: George Guo <guodongtai@kylinos.cn>
Signed-off-by: George Guo <guodongtai@kylinos.cn>
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
1. Rename the existing validate_code() to validate_ctx()
2. Factor out the code validation handling into a new helper
validate_code()
Then:
* validate_code() is used to check the validity of code.
* validate_ctx() is used to check both code validity and table entry
correctness.
The new validate_code() will be used in subsequent changes.
Reviewed-by: Hengqi Chen <hengqi.chen@gmail.com>
Co-developed-by: George Guo <guodongtai@kylinos.cn>
Signed-off-by: George Guo <guodongtai@kylinos.cn>
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Since $(LD) is directly used, hence -nostdlib is unneeded, MIPS has
removed this, we should remove it too.
bdbf2038fbf4 ("MIPS: VDSO: remove -nostdlib compiler flag").
In fact, other architectures also use $(LD) now.
fe00e50b2db8 ("ARM: 8858/1: vdso: use $(LD) instead of $(CC) to link VDSO")
691efbedc60d ("arm64: vdso: use $(LD) instead of $(CC) to link VDSO")
2ff906994b6c ("MIPS: VDSO: Use $(LD) instead of $(CC) to link VDSO")
2b2a25845d53 ("s390/vdso: Use $(LD) instead of $(CC) to link vDSO")
Cc: stable@vger.kernel.org
Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The Loongson-2K2000 integrates one eMMC controller and one SDIO controller.
The module is supported now, enable it.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and easier to
reason about.
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
In init_cpu_fullname(), a constant pointer to "model" property is
retrieved. It's later modified by the strsep() function, which is
illegal and corrupts kernel's FDT copy. This is shown by dmesg,
OF: fdt: not creating '/sys/firmware/fdt': CRC check failed
Create a mutable copy of the model property and do in-place operations
on the mutable copy instead. loongson_sysconf.cpuname lives across the
kernel lifetime, thus manually releasing isn't necessary.
Also move the of_node_put() call for the root node after the usage of
its property, since of_node_put() decreases the reference counter thus
usage after the call is unsafe.
Cc: stable@vger.kernel.org
Fixes: 44a01f1f726a ("LoongArch: Parsing CPU-related information from DTS")
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The LoongArch mem= parameter parser was previously limited to the
mem=<size>@<start> format. This was inconvenient for the common use
case of simply capping the total system memory, as it forced users to
manually specify a start address. It was also inconsistent with the
behavior on other architectures.
This patch enhances the parser in early_parse_mem() to also support the
more user-friendly mem=<size> format. The implementation now checks for
the presence of the '@' symbol to determine the user's intent:
- If mem=<size> is provided (no '@'), the kernel now calls
memblock_enforce_memory_limit(). This trims memory from the top down
to the specified size.
- If mem=<size>@<start> is provided, the original behavior is retained
for backward compatibility. This allows for defining specific memory
banks.
This change introduces an important usage rule reflected in the code's
comments: the mem=<size> format should only be specified once on the
kernel command line. It acts as a single, global cap on total memory. In
contrast, the mem=<size>@<start> format can be specified multiple times
to define several distinct memory regions.
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Now relocate_new_kernel_size is a .long value, which means 32bit, so its
high 32bit is undefined. This causes memcpy((void *)reboot_code_buffer,
relocate_new_kernel, relocate_new_kernel_size) in machine_kexec_prepare()
access out of range memories in some cases, and then end up with an ADE
exception.
So make relocate_new_kernel_size be a .quad value, which means 64bit, to
avoid such errors.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
According to the "LoongArch Reference Manual Volume 1: Basic
Architecture", the KSave registers (SAVE0-SAVE15) are defined in
Section 7.4.16 "Data Save (SAVE)" and listed in Table 7-1 "Control
and Status Registers Overview". These registers occupy the CSR
addresses from 0x30 to 0x3F, with 16 registers in total.
This patch completes the definitions of KS9 to KS15, so as to match
the architecture specification.
Reviewed-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The EFI memory map at 'boot_memmap' is crucial for kdump to understand
the primary kernel's memory layout. This memory region, typically part
of EFI Boot Services (BS) data, can be overwritten after ExitBootServices
if not explicitly preserved by the kernel.
This commit addresses this by:
1. Calling memblock_reserve() to reserve the entire physical region
occupied by the EFI memory map (header + descriptors). This prevents
the primary kernel from reallocating and corrupting this area.
2. Setting the EFI_PRESERVE_BS_REGIONS flag in efi.flags. This indicates
that efforts have been made to preserve critical BS code/data regions
which can be useful for other kernel subsystems or debugging.
These changes ensure the original EFI memory map data remains intact,
improving kdump reliability and potentially aiding other EFI-related
functionalities that might rely on preserved BS code/data.
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
When the KCOV is enabled all functions get instrumented, unless
the __no_sanitize_coverage attribute is used. To prepare for
__no_sanitize_coverage being applied to __init functions, we have to
handle differences in how GCC's inline optimizations get resolved.
For LoongArch this exposed several places where __init annotations
were missing but ended up being "accidentally correct". So fix these
cases.
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
After commit a934a57a42f64a4 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") and 7d95680d64ac8e836c ("scripts/misc-check:
check unnecessary #include <linux/export.h> when W=1"), we get some build
warnings with W=1:
arch/loongarch/kernel/acpi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/alternative.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/kfpu.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/traps.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/unwind_guess.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/unwind_orc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/unwind_prologue.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/lib/crc32-loongarch.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/lib/csum.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/elf.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
arch/loongarch/kernel/paravirt.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
arch/loongarch/pci/pci.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
So fix these build warnings for LoongArch.
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Without correct unregisteration, ACPI notify handlers and the platform
drivers installed by generic_subdriver_init() will become dangling
references after removing the loongson_laptop module, triggering various
kernel faults when a hotkey is sent or at kernel shutdown.
Cc: stable@vger.kernel.org
Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
loongson_laptop_turn_{on,off}_backlight() are designed for controlling
the power of the backlight, but they aren't really used in the driver
previously.
Unify these two functions since they only differ in arguments passed to
ACPI method, and wire up loongson_laptop_backlight_update() to update
the power state of the backlight as well. Tested on the TongFang L860-T2
Loongson-3A5000 laptop.
Cc: stable@vger.kernel.org
Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Previously during driver probe, 1 is unconditionally taken as current
brightness value and set to props.brightness, which will be considered
as the brightness before suspend and restored to EC on resume. Since a
brightness value of 1 almost never matches EC's state on coldboot (my
laptop's EC defaults to 80), this causes surprising changes of screen
brightness on the first time of resume after coldboot.
Let's get brightness from EC and take it as the current brightness on
probe of the laptop driver to avoid the surprising behavior. Tested on
TongFang L860-T2 Loongson-3A5000 laptop.
Cc: stable@vger.kernel.org
Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Like s390 and the jailhouse hypervisor, LoongArch's PCI architecture allows
passing isolated PCI functions to a guest OS instance. So it is possible
that there is a multi-function device without function 0 for the host or
guest.
Allow probing such functions by adding a IS_ENABLED(CONFIG_LOONGARCH) case
in the hypervisor_isolated_pci_functions() helper.
This is similar to commit 189c6c33ff42 ("PCI: Extend isolated function
probing to s390").
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250624062927.4037734-1-chenhuacai@loongson.cn
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
After commit a934a57a42f64a4 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") and 7d95680d64ac8e836c ("scripts/misc-check:
check unnecessary #include <linux/export.h> when W=1"), we get some build
warnings with W=1:
init/main.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
init/initramfs.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
So fix these build warnings for the init code.
Link: https://lkml.kernel.org/r/20250608141235.155206-1-chenhuacai@loongson.cn
Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
After commit a934a57a42f64a4 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") and 7d95680d64ac8e836c ("scripts/misc-check:
check unnecessary #include <linux/export.h> when W=1"), we get some build
warnings with W=1:
drivers/spi/spi-loongson-core.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
So fix these build warnings for SPI/Loongson.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20250608142939.172108-1-chenhuacai@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
After commit 25704938c86d7b2 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") and 1239f681359926101e ("scripts/misc-check:
check unnecessary #include <linux/export.h> when W=1"), we get some build
warnings with W=1:
sound/soc/loongson/loongson_i2s.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
So fix these build warnings for ASoC/Loongson.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20250608142737.168829-1-chenhuacai@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The syscall wrappers use the "a0" register for two different register
variables, both the first argument and the return value. Here the "ret"
variable is used as both input and output while the argument register is
only used as input. Clang treats the conflicting input parameters as an
undefined behaviour and optimizes away the argument assignment.
The code seems to work by chance for the most part today but that may
change in the future. Specifically clock_gettime_fallback() fails with
clockids from 16 to 23, as implemented by the upcoming auxiliary clocks.
Switch the "ret" register variable to a pure output, similar to the
other architectures' vDSO code. This works in both clang and GCC.
Link: https://lore.kernel.org/lkml/20250602102825-42aa84f0-23f1-4d10-89fc-e8bbaffd291a@linutronix.de/
Link: https://lore.kernel.org/lkml/20250519082042.742926976@linutronix.de/
Fixes: c6b99bed6b8f ("LoongArch: Add VDSO and VSYSCALL support")
Fixes: 18efd0b10e0f ("LoongArch: vDSO: Wire up getrandom() vDSO implementation")
Cc: stable@vger.kernel.org
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Add support for the stackleak feature. It initializes the stack with the
poison value before returning from system calls which improves the kernel
security.
At the same time, disables the plugin in EFI stub code because EFI stub
is out of scope for the protection.
Tested on Loongson-3A5000 (enable GCC_PLUGIN_STACKLEAK and LKDTM):
# echo STACKLEAK_ERASING > /sys/kernel/debug/provoke-crash/DIRECT
# dmesg
lkdtm: Performing direct entry STACKLEAK_ERASING
lkdtm: stackleak stack usage:
high offset: 320 bytes
current: 448 bytes
lowest: 1264 bytes
tracked: 1264 bytes
untracked: 208 bytes
poisoned: 14528 bytes
low offset: 64 bytes
lkdtm: OK: the rest of the thread stack is properly erased
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
ERROR INFO:
CPU 25 Unable to handle kernel paging request at virtual address 0x0
...
Call Trace:
[<900000000023c30c>] huge_pte_offset+0x3c/0x58
[<900000000057fd4c>] hugetlb_follow_page_mask+0x74/0x438
[<900000000051fee8>] __get_user_pages+0xe0/0x4c8
[<9000000000522414>] faultin_page_range+0x84/0x380
[<9000000000564e8c>] madvise_vma_behavior+0x534/0xa48
[<900000000056689c>] do_madvise+0x1bc/0x3e8
[<9000000000566df4>] sys_madvise+0x24/0x38
[<90000000015b9e88>] do_syscall+0x78/0x98
[<9000000000221f18>] handle_syscall+0xb8/0x158
In some cases, pmd may be NULL and rely on NULL as the return value for
processing, so it is necessary to determine this situation here.
Cc: stable@vger.kernel.org
Fixes: bd51834d1cf6 ("LoongArch: Return NULL from huge_pte_offset() for invalid PMD")
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
If we must preserve the firmware resource assignments, claim the existing
resources rather than reassigning everything.
According to PCI Firmware Specification: if ACPI DSM#5 function returns
0, the OS must retain the resource allocation for PCI in the firmware; if
ACPI DSM#5 function returns 1, the OS can ignore the resource allocation
for PCI and reallocate it.
Signed-off-by: Qihang Gao <gaoqihang@loongson.cn>
Signed-off-by: Juxin Gao <gaojuxin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
maoxiaochuan