update to 6fa43e4291

2K300:drivers/w1: w1.c: Disable one-wire print
2K300:drivers/staging: rtl8188fu: Remove "request firmware rtlwifi/rtl8188fufw.bin" debug info
2K300:sound/soc/loongson: Fix 24bit sound file cannot play
Many 24bit sound files are S24_3LE formate,
2k300:DTS:update dtb to fix pi hat funcation

arch/loongarch/boot/dts/loongson/ls2k300_pai_pihat.dts

@@ -6,18 +6,23 @@
 #include "ls2k300_pai_common.dtsi"
 
 / {
-	humidity_sensor {
-		compatible = "dht11-sensor";
-		SHT11-gpios = <&gpio 61 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
 	onewire {
 		compatible = "w1-gpio";
 		gpios = <&gpio 68 GPIO_ACTIVE_HIGH>;
 	};
 };
 
+&pinmux {
+	gpio_63_60_pins: pinmux_G60_G63_as_gpio {
+		pinctrl-single,bits = <0xc 0x00000000 0xff000000>;
+	};
+};
+
+&gpio {
+	pinctrl-0 = <&gpio_63_60_pins>;
+	pinctrl-names = "default";
+};
+
 &uart2 {
 	status = "ok"
 };
@@ -39,7 +44,7 @@
 };
 
 &spi1 {
-	status = "okay";
+	status = "disable"
 
 	spidev0@0 {
 		compatible = "rohm,dh2228fv";

drivers/staging/rtl8188fu/hal/rtl8188f/rtl8188f_hal_init.c

@@ -1120,14 +1120,17 @@ s32 rtl8188f_FirmwareDownload(PADAPTER padapter, BOOLEAN  bUsedqFw)
 	rtw_btcoex_PreLoadFirmware(padapter);
 #endif
 
+#ifdef CONFIG_DEBUG_RTL871X
 	dev_info(&psdpriv->pusbdev->dev, "request firmware %s\n",fw_name);
+#endif
 	if (request_firmware(&fw, fw_name, &psdpriv->pusbdev->dev)) {
 		dev_err(&psdpriv->pusbdev->dev, "Firmware %s not available\n", fw_name);
 		goto exit;
 	}
 
+#ifdef CONFIG_DEBUG_RTL871X
 	dev_info(&psdpriv->pusbdev->dev, "request firmware %s loaded\n",fw_name);
-
+#endif
 
 	if (fw->size > FW_8188F_SIZE) {
 		rtStatus = _FAIL;

drivers/w1/w1.c

@@ -740,7 +740,7 @@ int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn)
 	atomic_set(&sl->refcnt, 1);
 	atomic_inc(&sl->master->refcnt);
 	dev->slave_count++;
-	dev_info(&dev->dev, "Attaching one wire slave %02x.%012llx crc %02x\n",
+	dev_dbg(&dev->dev, "Attaching one wire slave %02x.%012llx crc %02x\n",
 		  rn->family, (unsigned long long)rn->id, rn->crc);
 
 	/* slave modules need to be loaded in a context with unlocked mutex */
@@ -752,7 +752,7 @@ int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn)
 	f = w1_family_registered(rn->family);
 	if (!f) {
 		f= &w1_default_family;
-		dev_info(&dev->dev, "Family %x for %02x.%012llx.%02x is not registered.\n",
+		dev_dbg(&dev->dev, "Family %x for %02x.%012llx.%02x is not registered.\n",
 			  rn->family, rn->family,
 			  (unsigned long long)rn->id, rn->crc);
 	}

sound/soc/loongson/ls-i2s.c

@@ -23,20 +23,14 @@
 #include <linux/pci.h>
 #include <linux/acpi.h>
 
+#include "ls-i2s.h"
+
 #define PCM_STEREO_OUT_NAME "I2S PCM Stereo out"
 #define PCM_STEREO_IN_NAME "I2S PCM Stereo in"
 
 #define IISRXADDR       0x0c
 #define IISTXADDR       0x10
 
-#define PSC_I2S_RATES SNDRV_PCM_RATE_8000_96000
-
-#define PSC_I2S_FORMATS ( SNDRV_PCM_FMTBIT_S8 | \
-		SNDRV_PCM_FMTBIT_S16_LE | \
-		SNDRV_PCM_FMTBIT_S20_3LE | \
-		SNDRV_PCM_FMTBIT_S24_LE | \
-		SNDRV_PCM_FMTBIT_S32_LE)
-
 static struct ls_pcm_dma_params ls_i2s_pcm_stereo_out;
 static struct ls_pcm_dma_params ls_i2s_pcm_stereo_in;
 static unsigned int revision_id;

sound/soc/loongson/ls-i2s.h

@@ -1,6 +1,14 @@
 #ifndef __LS_I2S_H__
 #define __LS_I2S_H__
 
+#define PSC_I2S_RATES SNDRV_PCM_RATE_8000_96000
+
+#define PSC_I2S_FORMATS ( SNDRV_PCM_FMTBIT_S8 | \
+		SNDRV_PCM_FMTBIT_S16_LE | \
+		SNDRV_PCM_FMTBIT_S20_3LE | \
+		SNDRV_PCM_FMTBIT_S24_3LE | \
+		SNDRV_PCM_FMTBIT_S32_LE)
+
 bool ls_i2s_is_slave_mode(void);
 
 #endif

sound/soc/loongson/ls-pcm.c

@@ -58,8 +58,8 @@ static const struct snd_pcm_hardware ls_pcm_hardware = {
 				  SNDRV_PCM_INFO_MMAP_VALID |
 				  SNDRV_PCM_INFO_RESUME |
 				  SNDRV_PCM_INFO_PAUSE,
-	.formats		= (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE),
-	.rates			= SNDRV_PCM_RATE_8000_96000,
+	.formats		= PSC_I2S_FORMATS,
+	.rates			= PSC_I2S_RATES,
 	.channels_min		= 2,
 	.channels_max		= 2,
 	.period_bytes_min	= 128,