Update dts

arch/loongarch/boot/dts/loongson/loongson2k1000.dtsi

@@ -168,6 +168,13 @@
 				};
 			};
 
+			ahci_led_as_gpio:ahci_led_as_gpio {
+				mux {
+					groups ="sata_led";
+					function ="gpio";
+				};
+			};
+
 			pwm0_default:pwm0 {
 				mux {
 					groups ="pwm0";

arch/loongarch/boot/dts/loongson/loongson2k300.dtsi

@@ -1,4 +1,5 @@
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/loongson2k300-clock.h>
 
 / {
@@ -134,6 +135,10 @@
 			pinctrl-single,bits = <0xc 0x0000000f 0x0000000f>;
 		};
 
+		i2c0_G60_G61_pins: pinmux_G60_G61_as_i2c0 {
+			pinctrl-single,bits = <0xc 0x05000000 0x0f000000>;
+		};
+
 		i2c1_pins: pinmux_G50_G51_as_i2c1 {
 			pinctrl-single,bits = <0xc 0x000000f0 0x000000f0>;
 		};
@@ -146,10 +151,18 @@
 			pinctrl-single,bits = <0xc 0x00000f00 0x00000f00>;
 		};
 
+		i2c2_G82_G83_pins: pinmux_G82_G83_as_i2c2 {
+			pinctrl-single,bits = <0x14 0x000000a0 0x000000f0>;
+		};
+
 		i2c3_pins: pinmux_G54_G55_as_i2c3 {
 			pinctrl-single,bits = <0xc 0x0000f000 0x0000f000>;
 		};
 
+		i2c3_G84_G85_pins: pinmux_G84_G85_as_i2c3 {
+			pinctrl-single,bits = <0x14 0x00000a00 0x000000f00>;
+		};
+
 		spi1_pins: pinmux_G60_G63_as_spi1 {
 			pinctrl-single,bits = <0xc 0xff000000 0xff000000>;
 		};
@@ -692,9 +705,6 @@
 			clock-frequency = <0 200000000>;
 			bus-width = <8>;
 			cap-mmc-highspeed;
-#if 0	//需要u-boot调整mmc的驱动力，蜂鸟板&先锋派使用uboot-240929之后的版本，可以开启此功能 
-			mmc-hs200-1_8v;
-#endif
 			no-sd;
 			no-sdio;
 		};

arch/loongarch/boot/dts/loongson/ls2k300_g2k03z0_core_v10.dtsi

@@ -64,3 +64,7 @@
 		};
 	};
 };
+
+// &emmc {
+// 	mmc-hs200-1_8v;
+// };

arch/loongarch/boot/dts/loongson/ls2k300_pai_common.dtsi

@@ -181,6 +181,10 @@
 	};
 };
 
+&emmc {
+	mmc-hs200-1_8v;
+};
+
 &i2c0 {
 	status = "ok"
 

arch/loongarch/boot/dts/loongson/ls2k300_pai_pihat.dts

@@ -13,14 +13,14 @@
 };
 
 &pinmux {
-       gpio_63_60_pins: pinmux_G60_G63_as_gpio {
-               pinctrl-single,bits = <0xc 0x00000000 0xff000000>;
-       };
+	gpio_63_60_pins: pinmux_G60_G63_as_gpio {
+		pinctrl-single,bits = <0xc 0x00000000 0xff000000>;
+	};
 };
 
 &gpio {
-       pinctrl-0 = <&gpio_63_60_pins>;
-       pinctrl-names = "default";
+	pinctrl-0 = <&gpio_63_60_pins>;
+	pinctrl-names = "default";
 };
 
 &uart2 {