Commit Graph
9 Commits
Author SHA1 Message Date
Binbin Zhou bf3b61946c mtd: rawnand: loongson: Add Loongson-2K1000 NAND controller support
The Loongson-2K1000 NAND controller is also similar to the Loongson-1C.

It supports a maximum capacity of 16GB FLASH per chip with a maximum
page size of 8KB, and it supports up to 4 chip selects and 4 RDY
signals.

The key difference from the Loongson-2K0500 is that it requires explicit
configuration of the DMA control route. Typically, it is configured as
APBDMA0.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
2026-02-04 16:41:12 +08:00
Binbin Zhou e1fc29b581 mtd: rawnand: loongson: Add Loongson-2K0500 NAND controller support
The Loongson-2K0500 NAND controller is similar to the Loongson-1C.

It supports a maximum capacity of 16GB FLASH per chip with a maximum
page size of 8KB, and it supports up to 4 chip selects and 4 RDY
signals.

Its DMA controller is defaulted to APBDMA0.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
2026-02-04 16:41:12 +08:00
Binbin Zhou d821c06b3f mtd: rawnand: loongson: Add nand chip select support
The page address register describes the page address of the starting
address for NAND read/write/erase operations.

According to the manual, it consists of two parts:
	{chip select, page number}

The `chip select` is fixed at 2 bits, and the `page number` is
determined based on the actual capacity of the single-chip memory.
Therefore we need to determine the `chip select` bits base on the `page
number`.

For example, for a 1GB capacity chip (2K page size), it has 1M pages.
Thus, [19:0] is used to represent the page number, and [21:20]
represents the chip select.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
2026-02-04 16:41:12 +08:00
Keguang Zhang 2cbbbd492c mtd: rawnand: loongson: Add 6-byte NAND ID reading support
Loongson-1C and Loongson-2K SoCs support NAND flash chips with 6-byte ID.
However, the current implementation only handles 5-byte ID which can lead
to incorrect chip detection.

Extend loongson_nand_read_id_type_exec() to support 6-byte NAND ID.

Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
2026-02-04 16:41:11 +08:00
maoxiaochuan db59e06a9f mtd: rawnand: loongson1: Rename the prefix from ls1x to loongson
I am going to introduce the NAND controllers of the Loongson-2K series
CPUs, which are similar to Loongson-1.

As preparation, rename all prefixes from Loongson1-specific to
Loongson-generic.

No functional change intended.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
2026-02-04 16:41:11 +08:00
Keguang Zhang a639ca8c57 mtd: rawnand: loongson1: Fix inconsistent refcounting in ls1x_nand_chip_init()
As reported by Dan,
commit d2d10ede04b1 ("mtd: rawnand: Add Loongson-1 NAND Controller
Driver"), leads to the following Smatch static checker warning:

drivers/mtd/nand/raw/loongson1-nand-controller.c:730 ls1x_nand_chip_init()
warn: inconsistent refcounting 'chip_np->kobj.kref.refcount.refs.counter':

Fix this issue by calling of_node_put() immediately after using chip_np.
In addition, remove all unnecessary of_node_put(chip_np) calls.

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aBR535RZZT-sa6QZ@stanley.mountain/
Fixes: d2d10ede04b1 ("mtd: rawnand: Add Loongson-1 NAND Controller Driver")
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
2026-02-04 16:41:11 +08:00
Dan Carpenter 2a231d54a4 mtd: rawnand: loongson1: Fix error code in ls1x_nand_dma_transfer()
The "desc" variable is NULL and PTR_ERR(NULL) is zero/success.  Return
a negative error code instead.

Fixes: d2d10ede04b1 ("mtd: rawnand: Add Loongson-1 NAND Controller Driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
2026-02-04 16:41:11 +08:00
maoxiaochuan 2bf80f3863 mtd: rawnand: Add Loongson-1 NAND Controller Driver
Add NAND controller driver for Loongson-1 SoCs.

Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
2026-02-04 16:41:11 +08:00
maoxiaochuan 8b074cffbf init src (linux-6.12.0) 2025-02-13 14:11:16 +08:00