The default COMMAND_LINE_SIZE of 512, inherited from asm-generic, is
too small for modern use cases. For example, kdump configurations or
extensive debugging parameters can easily exceed this limit.
Therefore, increase the command line size to 4096 bytes, aligning
LoongArch with the MIPS architecture. This change follows a broader
trend among architectures to raise this limit to support modern needs;
for instance, PowerPC increased its value for similar reasons in the
commit a5980d064fe2 ("powerpc: Bump COMMAND_LINE_SIZE to 2048").
Similar to the change made for RISC-V in the commit 61fc1ee8be26
("riscv: Bump COMMAND_LINE_SIZE value to 1024"), this is considered
a safe change. The broader kernel community has reached a consensus
that modifying COMMAND_LINE_SIZE from UAPI headers does not constitute
a uABI breakage, as well-behaved userspace applications should not
rely on this macro.
Suggested-by: Huang Cun <cunhuang@tencent.com>
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
When compiling with LLVM and CONFIG_LTO_CLANG is set, there exist many
objtool warnings "sibling call from callable instruction with modified
stack frame".
For this special case, the related object file shows that there is no
generated relocation section '.rela.discard.tablejump_annotate' for the
table jump instruction jirl, thus objtool can not know that what is the
actual destination address.
It needs to do something on the LLVM side to make sure that there is the
relocation section '.rela.discard.tablejump_annotate' if LTO is enabled,
but in order to maintain compatibility for the current LLVM compiler,
this can be done in the kernel Makefile for now. Ensure it is aware of
linker with LTO, '--loongarch-annotate-tablejump' needs to be passed via
'-mllvm' to ld.lld.
Note that it should also pass the compiler option -mannotate-tablejump
rather than only pass '-mllvm --loongarch-annotate-tablejump' to ld.lld
if LTO is enabled, otherwise there are no jump info for some table jump
instructions.
Fixes: e20ab7d454ee ("LoongArch: Enable jump table for objtool")
Closes: https://lore.kernel.org/loongarch/20250731175655.GA1455142@ax162/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Co-developed-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
When KCOV is enabled all functions get instrumented, unless
the __no_sanitize_coverage attribute is used. To prepare for
__no_sanitize_coverage being applied to __init functions, we
have to handle differences in how GCC's inline optimizations get
resolved. For mips this requires adding the __init annotation on
init_mips_clocksource().
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250717232519.2984886-9-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
This patch adds tracepoints to track KVM exits caused by CPUCFG and
CSR emulation. Note that IOCSR emulation tracing is already covered
by the generic trace_kvm_iocsr().
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Yulong Han <wheatfox17@icloud.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The function opencodes for_each_set_bit() macro, which makes it bulky.
Using the proper API makes all the housekeeping code going away.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The function in fact traverses a "bitmap" stored in GPR regs A1 and A2,
but does it in a non-obvious way by creating a single-word bitmap twice.
This patch switches the function to create a single 2-word bitmap, and
also employs for_each_set_bit() macro, as it helps to drop most of the
housekeeping code.
While there, convert the function to return void to not confuse readers
with unchecked result.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
mc146818_get_cmos_time() is now mostly equivalent to mc146818_get_time()
from drivers/rtc/rtc-mc146818-lib.c, with the latter using a more
advanced algorithm (which checks the UIP bit in the CMOS). The Malta
and Loongson2ef platforms, the only users of mc146818_get_cmos_time()
have RTC devices that should be MC146818 compatible.
So, rewrite mc146818_get_cmos_time() in a way that uses
mc146818_get_time() and add CONFIG_RTC_MC146818_LIB as a dependency of
CONFIG_MIPS_MALTA and CONFIG_CPU_LOONGSON2EF.
The should be safe as:
- malta_defconfig already uses a standard RTC CMOS driver
(CONFIG_RTC_DRV_CMOS=y). The Malta board has an Intel 82371EB (PIIX4E)
south bridge with the CMOS RTC, so should work correctly with the
modification,
- Loongson2e and 2f apparently use the VIA686B south bridge and the AMD
CS5536 south bridge respectively (at least according to Kconfig). I
have checked datasheets of both and these appear to be MC146818
software compatible.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The mc146818_decode_year macro is used only in mc146818_get_cmos_time(),
which in turn is called only in
arch/mips/loongson2ef/common/time.c
and
arch/mips/mti-malta/malta-time.c
so on mach-jazz it is unused and can be removed. On other platforms it
is defined in the same way, so it can be safely folded into
mc146818_get_cmos_time().
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The mc146818_decode_year macro is used only in mc146818_get_cmos_time,
which in turn is called only in
arch/mips/loongson2ef/common/time.c
and
arch/mips/mti-malta/malta-time.c
So no SNI or mach-rm content. SNI did not use mc146818_get_cmos_time
apparently since
commit 06cf5583fd9a ("[MIPS] SNI RM updates")
in 2007.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
I have checked carefully: this function is unused, so remove it.
The last caller appears to have been removed in 2007 in
commit 4b550488f894 ("[MIPS] Deforest the function pointer jungle in the time code.")
mc146818-time.h is included only in three files:
- arch/mips/mti-malta/malta-time.c
- arch/mips/loongson64/numa.c
- arch/mips/loongson2ef/common/time.c
Also, remove unused macros USEC_AFTER/USEC_BEFORE.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Not all tasks have an ABI associated or vDSO mapped,
for example kthreads never do.
If such a task ever ends up calling stack_top(), it will derefence the
NULL ABI pointer and crash.
This can for example happen when using kunit:
mips_stack_top+0x28/0xc0
arch_pick_mmap_layout+0x190/0x220
kunit_vm_mmap_init+0xf8/0x138
__kunit_add_resource+0x40/0xa8
kunit_vm_mmap+0x88/0xd8
usercopy_test_init+0xb8/0x240
kunit_try_run_case+0x5c/0x1a8
kunit_generic_run_threadfn_adapter+0x28/0x50
kthread+0x118/0x240
ret_from_kernel_thread+0x14/0x1c
Only dereference the ABI point if it is set.
The GIC page is also included as it is specific to the vDSO.
Also move the randomization adjustment into the same conditional.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
After commit a934a57a42f64a4 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") and 7d95680d64ac8e836c ("scripts/misc-check:
check unnecessary #include <linux/export.h> when W=1"), we get some build
warnings with W=1:
arch/mips/loongson64/setup.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
So fix these build warnings for MIPS/Loongson.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
It is better to use unsigned long rather than long for _end and _text to
calculate the kernel length.
Cc: stable@vger.kernel.org # v6.3+
Fixes: e5f02b51fa0c ("LoongArch: Add support for kernel address space layout randomization (KASLR)")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The __pmd() and __pte() helper macros provide the correct initialization
syntax and abstraction for the pmd_t and pte_t types.
Use __pmd() to fix follow warning about __swp_entry_to_pmd() with gcc-15
under specific configs [1] :
In file included from ./include/linux/pgtable.h:6,
from ./include/linux/mm.h:31,
from ./include/linux/pagemap.h:8,
from arch/loongarch/mm/init.c:14:
./include/linux/swapops.h: In function ‘swp_entry_to_pmd’:
./arch/loongarch/include/asm/pgtable.h:302:34: error: missing braces around initializer [-Werror=missing-braces]
302 | #define __swp_entry_to_pmd(x) ((pmd_t) { (x).val | _PAGE_HUGE })
| ^
./include/linux/swapops.h:559:16: note: in expansion of macro ‘__swp_entry_to_pmd’
559 | return __swp_entry_to_pmd(arch_entry);
| ^~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Also update __swp_entry_to_pte() to use __pte() for consistency.
[1]. https://download.01.org/0day-ci/archive/20251119/202511190316.luI90kAo-lkp@intel.com/config
Cc: stable@vger.kernel.org
Signed-off-by: Yuli Wang <wangyl5933@chinaunicom.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Now the optimized version of arch_dup_task_struct() for LoongArch
assumes 'thread' is the last member of 'task_struct'. But this is
not true if CONFIG_RANDSTRUCT is enabled after Linux-6.16.
So fix the arch_dup_task_struct() function for CONFIG_RANDSTRUCT by
copying the whole 'task_struct'.
Cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
LoongArch has the bitrev.w instruction to reverse bits in a 32-bit
integer, thus there's no need to reverse the bytes and use bitrev.4b.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Without HAVE_ARCH_BITREVERSE, the architecture-optimized bit reverse
implementations in arch/loongarch/include/asm/bitrev.h are not used at
all.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
If the default state of the interrupt controllers in the first kernel
don't mask any interrupts, it may cause the second kernel to potentially
receive interrupts (which were previously allocated by the first kernel)
immediately after a CPU becomes online during its boot process. These
interrupts cannot be properly routed, leading to bad IRQ issues.
This patch calls machine_kexec_mask_interrupts() to mask all interrupts
during the kexec/kdump process.
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Consolidate the machine_kexec_mask_interrupts implementation into a common
function located in a new file: kernel/irq/kexec.c. This removes duplicate
implementations from architecture-specific files in arch/arm, arch/arm64,
arch/powerpc, and arch/riscv, reducing code duplication and improving
maintainability.
The new implementation retains architecture-specific behavior for
CONFIG_GENERIC_IRQ_KEXEC_CLEAR_VM_FORWARD, which was previously implemented
for ARM64. When enabled (currently for ARM64), it clears the active state
of interrupts forwarded to virtual machines (VMs) before handling other
interrupt masking operations.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241204142003.32859-2-farbere@amazon.com
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The current LoongArch BPF trampoline implementation is incompatible
with tracing functions in kernel modules. This causes several severe
and user-visible problems:
* The `bpf_selftests/module_attach` test fails consistently.
* Kernel lockup when a BPF program is attached to a module function [1].
* Critical kernel modules like WireGuard experience traffic disruption
when their functions are traced with fentry [2].
Given the severity and the potential for other unknown side-effects, it
is safest to disable the feature entirely for now. This patch prevents
the BPF subsystem from allowing trampoline attachments to kernel module
functions on LoongArch.
This is a temporary mitigation until the core issues in the trampoline
code for kernel module handling can be identified and fixed.
[root@fedora bpf]# ./test_progs -a module_attach -v
bpf_testmod.ko is already unloaded.
Loading bpf_testmod.ko...
Successfully loaded bpf_testmod.ko.
test_module_attach:PASS:skel_open 0 nsec
test_module_attach:PASS:set_attach_target 0 nsec
test_module_attach:PASS:set_attach_target_explicit 0 nsec
test_module_attach:PASS:skel_load 0 nsec
libbpf: prog 'handle_fentry': failed to attach: -ENOTSUPP
libbpf: prog 'handle_fentry': failed to auto-attach: -ENOTSUPP
test_module_attach:FAIL:skel_attach skeleton attach failed: -524
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
Successfully unloaded bpf_testmod.ko.
[1]: https://lore.kernel.org/loongarch/CAK3+h2wDmpC-hP4u4pJY8T-yfKyk4yRzpu2LMO+C13FMT58oqQ@mail.gmail.com/
[2]: https://lore.kernel.org/loongarch/CAK3+h2wYcpc+OwdLDUBvg2rF9rvvyc5amfHT-KcFaK93uoELPg@mail.gmail.com/
Cc: stable@vger.kernel.org
Fixes: f9b6b41f0cf3 ("LoongArch: BPF: Add basic bpf trampoline support")
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
If there is no valid cache info detected (may happen in virtual machine)
for pci_dfl_cache_line_size, kernel shouldn't panic. Because in the PCI
core it will be evaluated to (L1_CACHE_BYTES >> 2).
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
On physical machine, NUMA node id comes from high bit 44:48 of physical
address. However it is not true on virt machine. With general method, it
comes from ACPI SRAT table.
Here the common function numa_memblks_init() is used to parse NUMA node
information with numa_memblks.
Cc: <stable@vger.kernel.org>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Some processors have no IOCSR.VENDOR and IOCSR.CPUNAME, some processors
have these registers but there is no valid information.
Consolidate CPU names in /proc/cpuinfo:
1. Add "PRID" to display the PRID & Core-Name;
2. Let "Model Name" display "Unknown" if no valid name.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The kernel UAPI headers already contain fixed-width integer types, there
is no need to rely on the libc types. There may not be a libc available
or the libc may not provides the <stdint.h>, like for example on nolibc.
This also aligns the header with the rest of the LoongArch UAPI headers.
Fixes: 803b0fc5c3f2 ("LoongArch: Add process management")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Now there 5 places which calculate max_pfn & max_low_pfn:
1. in fdt_setup() for FDT systems;
2. in memblock_init() for ACPI systems;
3. in init_numa_memory() for NUMA systems;
4. in arch_mem_init() to recalculate for "mem=" cmdline;
5. in paging_init() to recalculate for NUMA systems.
Since memblock_init() is called both for ACPI and FDT systems, move the
calculation out of the for_each_efi_memory_desc() loop can eliminate the
first case. The last case is very questionable (may be derived from the
MIPS/Loongson code) and breaks the "mem=" cmdline, so should be removed.
And then the NUMA version of paging_init() can be also eliminated.
After consolidation there are 3 places of calculation:
1. in memblock_init() for both ACPI and FDT systems;
2. in init_numa_memory() to recalculate for NUMA systems;
3. in arch_mem_init() to recalculate for the "mem=" cmdline.
For all cases the calculation is:
max_pfn = PFN_DOWN(memblock_end_of_DRAM());
max_low_pfn = min(PFN_DOWN(HIGHMEM_START), max_pfn);
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
When specifying '-d' for kexec_file_load interface, loaded locations of
kernel/initrd/cmdline etc can be printed out to help debug.
Commit eb7622d908a0 ("kexec_file, riscv: print out debugging message if
required") fixes the same issue on RISC-V.
So, remove kexec_image_info() because the content has been printed out
in generic code.
And on Loongson-3A5000, the printed messages look like below:
kexec_file: kernel: 00000000d9aad283 kernel_size: 0x2e77f30
kexec_file(EFI): No LoongArch PE image header.
kexec_file: Loaded initrd at 0x80000000 bufsz=0x1637cd0 memsz=0x1638000
kexec_file(ELF): Loaded kernel at 0x9c20000 bufsz=0x27f1800 memsz=0x2950000
kexec_file: nr_segments = 2
kexec_file: segment[0]: buf=0x00000000cc3e6c33 bufsz=0x27f1800 mem=0x9c20000 memsz=0x2950000
kexec_file: segment[1]: buf=0x00000000bb75a541 bufsz=0x1637cd0 mem=0x80000000 memsz=0x1638000
kexec_file: kexec_file_load: type:0, start:0xb15d000 head:0x18db60002 flags:0x8
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The kexec_buf structure was previously declared without initialization.
commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly")
added a field that is always read but not consistently populated by all
architectures. This un-initialized field will contain garbage.
This is also triggering a UBSAN warning when the uninitialized data is
accessed:
------------[ cut here ]------------
UBSAN: invalid-load in ./include/linux/kexec.h:210:10
load of value 252 is not a valid value for type '_Bool'
Zero-initializing kexec_buf at declaration ensures all fields are
cleanly set, preventing future instances of uninitialized memory being
used.
Fixes: bf454ec31add ("kexec_file: allow to place kexec_buf randomly")
Link: https://lore.kernel.org/r/20250827-kbuf_all-v1-2-1df9882bb01a@debian.org
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
CSR.FWPC and CSR.MWPC are 32bit registers, so use csr_read32() rather
than csr_read64() to read the values of FWPC/MWPC.
Cc: stable@vger.kernel.org
Fixes: edffa33c7bb5a73 ("LoongArch: Add hardware breakpoints/watchpoints support")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Remove the unnecessary __GFP_HIGHMEM masking in pud_alloc_one(), which
was introduced with commit 382739797f79ec2 ("loongarch: convert various
functions to use ptdescs"). GFP_KERNEL doesn't contain __GFP_HIGHMEM.
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Now if the PTE/PMD is dirty with _PAGE_DIRTY but without _PAGE_MODIFIED,
after {pte,pmd}_modify() we lose _PAGE_DIRTY, then {pte,pmd}_dirty()
return false and lead to data loss. This can happen in certain scenarios
such as HW PTW doesn't set _PAGE_MODIFIED automatically, so here we need
_PAGE_MODIFIED to record the dirty status (_PAGE_DIRTY).
The new modification involves checking whether the original PTE/PMD has
the _PAGE_DIRTY flag. If it exists, the _PAGE_MODIFIED bit is also set,
ensuring that the {pte,pmd}_dirty() interface can always return accurate
information.
Cc: stable@vger.kernel.org
Co-developed-by: Liupu Wang <wangliupu@loongson.cn>
Signed-off-by: Liupu Wang <wangliupu@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
1. Use phys_addr_t instead of u64, which can work for both 32/64 bits.
2. Check whether the input physical address is above TO_PHYS_MASK (and
return NULL if yes) for the DMW version.
Note: In theory early_ioremap() also need the TO_PHYS_MASK checking, but
the UEFI BIOS pass some DMW virtual addresses.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Now we use virtual addresses to fill CSR_MERRENTRY/CSR_TLBRENTRY, but
hardware hope physical addresses. Now it works well because the high
bits are ignored above PA_BITS (48 bits), but explicitly use physical
addresses can avoid potential bugs. So fix it.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
LoongArch's MSG interrupt features are used across multiple subsystems.
Clarify these features to avoid misuse, existing users will be adjusted
if necessary.
MSGINT: Infrastructure, means the CPU core supports message interupts.
Indicated by CPUCFG1.MSGINT.
AVECINT: AVEC interrupt controller based on MSGINT, means the CPU chip
supports direct message interrupts. Indicated by IOCSR.FEATURES.DMSI.
REDIRECTINT: REDIRECT interrupt controller based on MSGINT and AVECINT,
means the CPU chip supports redirect message interrupts. Indicated by
IOCSR.FEATURES.RMSI.
For example:
Loongson-3A5000/3C5000 doesn't support MSGINT/AVECINT/REDIRECTINT;
Loongson-3A6000 supports MSGINT but doesn't support AVECINT/REDIRECTINT;
Loongson-3C6000 supports MSGINT/AVECINT/REDIRECTINT.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The HD-audio codec driver configs have been updated again the drivers
got split with different kconfigs.
Enable all Realtek HD-audio codecs and HDMI codecs (except for
NVIDIA_MCP and TEGRA) per request.
Fixes: 1d8dd982c409 ("ALSA: hda/realtek: Enable drivers as default")
Fixes: 81231ad173d8 ("ALSA: hda/hdmi: Enable drivers as default")
Cc: loongarch@lists.linux.dev
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250731091109.16901-3-tiwai@suse.de
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
Bibo Mao