LoongArch supports ARCH_HAS_SET_DIRECT_MAP, therefore wire up the
memfd_secret system call, which just depends on it.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Signed-off-by: Lain "Fearyncess" Yang <fearyncess@aosc.io>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The perf ilist command is a textual app [1] similar to perf list. In
the top-left pane a tree of PMUs is displayed. Selecting a PMU expands
the events within it. Selecting an event displays the `perf list`
style event information in the top-right pane.
When an event is selected it is opened and the counters on each CPU
the event is for are periodically read. The bottom of the screen
contains a scrollable set of sparklines showing the events in total
and on each CPU. Scrolling below the sparklines shows the same data as
raw counts. The sparklines are small graphs where the height of the
bar is in relation to maximum of the other counts in the graph.
By default the counts are read with an interval of 0.1 seconds (10
times per second). A -I/--interval command line option allows the
interval to be changed. The oldest read counts are dropped when the
counts fill the line causing the sparkline to move from right to left.
A search box can be pulled up with the 's' key. 'n' and 'p' iterate
through the search results. As some PMUs have hundreds of events a 'c'
key will collapse the events in the current PMU to make navigating the
PMUs easier.
[1] https://textual.textualize.io/
Committer testing:
This needs a bit more polishing, to test it I had to go thru some hops:
$ python ilist
python: can't open file '/home/acme/git/perf-tools-next/ilist': [Errno 2] No such file or directory
$
$ python tools/perf/python/ilist.py
Traceback (most recent call last):
File "/home/acme/git/perf-tools-next/tools/perf/python/ilist.py", line 8, in <module>
from textual import on
ModuleNotFoundError: No module named 'textual'
$
$ sudo dnf install textual
Updating and loading repositories:
Repositories loaded.
Failed to resolve the transaction:
No match for argument: textual
You can try to add to command line:
--skip-unavailable to skip unavailable packages
$
After some searching I installed the 'python3-textual' and it starts,
allowing traversing the various pmus and events, see descriptions on the
upper right side and a view of the events on the lower half of the
screen.
Interesting for quickly iterating thru the available events.
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautam Menghani <gautam@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20250819013941.209033-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
When compiling with LLVM and CONFIG_RUST is set, there exists the
following objtool warning:
rust/compiler_builtins.o: warning: objtool: __rust__unordsf2(): unexpected end of section .text.unlikely.
objdump shows that the end of section .text.unlikely is an atomic
instruction:
amswap.w $zero, $ra, $zero
According to the LoongArch Reference Manual, if the amswap.w atomic
memory access instruction has the same register number as rd and rj,
the execution will trigger an Instruction Non-defined Exception, so
mark the above instruction as INSN_BUG type to fix the warning.
Cc: stable@vger.kernel.org
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
If the break immediate code is 0, it should mark the type as
INSN_TRAP. If the break immediate code is 1, it should mark the
type as INSN_BUG.
While at it, format the code style and add the code comment for nop.
Cc: stable@vger.kernel.org
Suggested-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The objtool program need to analysis the control flow of each object file
generated by compiler toolchain, it needs to know all the locations that
a branch instruction may jump into, if a jump table is used, objtool has
to correlate the jump instruction with the table.
On x86 (which is the only port supported by objtool before LoongArch),
there is a relocation type on the jump instruction and directly points
to the table. But on LoongArch, the relocation is on another kind of
instruction prior to the jump instruction, and also with scheduling it
is not very easy to tell the offset of that instruction from the jump
instruction. Furthermore, because LoongArch has -fsection-anchors (often
enabled at -O1 or above) the relocation may actually points to a section
anchor instead of the table itself.
For the jump table of switch cases, a GCC patch "LoongArch: Add support
to annotate tablejump" and a Clang patch "[LoongArch] Add options for
annotate tablejump" have been merged into the upstream mainline, it can
parse the additional section ".discard.tablejump_annotate" which stores
the jump info as pairs of addresses, each pair contains the address of
jump instruction and the address of jump table.
For the jump table of computed gotos, it is indeed not easy to implement
in the compiler, especially if there is more than one computed goto in a
function such as ___bpf_prog_run(). objdump kernel/bpf/core.o shows that
there are many table jump instructions in ___bpf_prog_run(), but there are
no relocations on the table jump instructions and to the table directly on
LoongArch.
Without the help of compiler, in order to figure out the address of goto
table for the special case of ___bpf_prog_run(), since the instruction
sequence is relatively single and stable, it makes sense to add a helper
find_reloc_of_rodata_c_jump_table() to find the relocation which points
to the section ".rodata..c_jump_table".
If find_reloc_by_table_annotate() failed, it means there is no relocation
info of switch table address in ".rela.discard.tablejump_annotate", then
objtool may find the relocation info of goto table ".rodata..c_jump_table"
with find_reloc_of_rodata_c_jump_table().
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: michael <michael5hzg@gmail.com>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
The objtool program need to analysis the control flow of each object file
generated by compiler toolchain, it needs to know all the locations that
a branch instruction may jump into, if a jump table is used, objtool has
to correlate the jump instruction with the table.
On x86 (which is the only port supported by objtool before LoongArch),
there is a relocation type on the jump instruction and directly points
to the table. But on LoongArch, the relocation is on another kind of
instruction prior to the jump instruction, and also with scheduling it
is not very easy to tell the offset of that instruction from the jump
instruction. Furthermore, because LoongArch has -fsection-anchors (often
enabled at -O1 or above) the relocation may actually points to a section
anchor instead of the table itself.
The good news is that after continuous analysis and discussion, at last
a GCC patch "LoongArch: Add support to annotate tablejump" and a Clang
patch "[LoongArch] Add options for annotate tablejump" have been merged
into the upstream mainline, the compiler changes make life much easier
for switch table support of objtool on LoongArch.
By now, there is an additional section ".discard.tablejump_annotate" to
store the jump info as pairs of addresses, each pair contains the address
of jump instruction and the address of jump table.
In order to find switch table, it is easy to parse the relocation section
".rela.discard.tablejump_annotate" to get table_sec and table_offset, the
rest process is somehow like x86.
Link: https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=0ee028f55640
Link: https://github.com/llvm/llvm-project/commit/4c2c17756739
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: michael <michael5hzg@gmail.com>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
When compiling with Clang on LoongArch, there are unsorted table offset
of rodata if there exist many jump tables, it will get the wrong table
end and find the wrong jump destination instructions in add_jump_table().
Sort the rodata table offset by parsing ".rela.discard.tablejump_annotate"
and then get each table size of rodata corresponded with each table jump
instruction, it is used to check the table end and will break the process
when parsing ".rela.rodata" to avoid getting the wrong jump destination
instructions.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: michael <michael5hzg@gmail.com>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
When compiling with Clang on LoongArch, there are unsorted table offset
of rodata if there exist many jump tables, it will get the wrong table
end and find the wrong jump destination instructions in add_jump_table(),
so it needs to check the table size of rodata to break the process when
parsing the relocation section of rodata.
This is preparation for later patch on LoongArch, there is no effect for
the other archs with this patch.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: michael <michael5hzg@gmail.com>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
When compiling with Clang on LoongArch, there exists unreachable entry of
rodata which points to a position after the function return instruction,
this is generated by compiler to fill the non-existent switch case, just
skip the entry when parsing the relocation section of rodata.
This is preparation for later patch on LoongArch, there is no effect for
the other archs with this patch.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: michael <michael5hzg@gmail.com>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
In the most cases, the entry size of rodata is 8 bytes because the
relocation type is 64 bit, but when compiling with Clang on LoongArch,
there exists 32 bit relocation type, the entry size of rodata should
be 4 bytes in this case.
This is preparation for later patch on LoongArch, there is no effect
for the other archs with this patch.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: michael <michael5hzg@gmail.com>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
There are some "unreachable instruction" objtool warnings when compiling
with Clang on LoongArch, this is because the "break" instruction is set
as dead end due to its type is INSN_BUG in decode_instructions() at the
beginning, and it does not set insn->dead_end of the "break" instruction
as false after checking ".rela.discard.reachable" in add_dead_ends(), so
the next instruction of "break" is marked as unreachable.
Actually, it can find the reachable instruction after parsing the section
".rela.discard.reachable", in some cases, the "break" instruction may not
be the first previous instruction with scheduling by Machine Instruction
Scheduler of LLVM, it should find more times and then set insn->dead_end
of the "break" instruction as false.
This is preparation for later patch on LoongArch, there is no effect for
the other archs with this patch.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: michael <michael5hzg@gmail.com>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
In the relocation section ".rela.rodata" of each .o file compiled with
LoongArch toolchain, there are various symbol types such as STT_NOTYPE,
STT_OBJECT, STT_FUNC in addition to the usual STT_SECTION, it needs to
use reloc symbol offset instead of reloc addend to find the destination
instruction in find_jump_table() and add_jump_table().
This is preparation for later patch on LoongArch, there is no effect for
the other archs with this patch.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: michael <michael5hzg@gmail.com>
Signed-off-by: maoxiaochuan <maoxiaochuan@loongson.cn>
maoxiaochuan