From 1e9ca25a847da401d3ea6cae3c8102b6e9ab282a Mon Sep 17 00:00:00 2001 From: Yao Zi Date: Thu, 4 Sep 2025 01:34:36 +0000 Subject: [PATCH] dt-bindings: gpio: loongson: Document GPIO controller of LS2K0300 SoC Loongson-2K0300 ships a GPIO controller whose input/output control logic is similar to previous generation of SoCs. Additionally, it acts as an interrupt-controller supporting both level and edge interrupts and has a distinct reset signal. Describe its compatible in devicetree. We enlarge the maximum value of ngpios to 128, since the controller technically supports at most 128 pins, although only 106 are routed out of the package. Properties for interrupt-controllers and resets are introduced and limited as LS2K0300 only. Signed-off-by: Yao Zi Reviewed-by: Krzysztof Kozlowski Reviewed-by: Huacai Chen Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20250904013438.2405-2-ziyao@disroot.org Signed-off-by: Bartosz Golaszewski Signed-off-by: maoxiaochuan --- .../bindings/gpio/loongson,ls-gpio.yaml | 28 ++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml index cf3b1b270..3a9f29910 100644 --- a/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml @@ -14,6 +14,7 @@ properties: oneOf: - enum: - loongson,ls2k-gpio + - loongson,ls2k0300-gpio - loongson,ls2k0500-gpio0 - loongson,ls2k0500-gpio1 - loongson,ls2k2000-gpio0 @@ -33,7 +34,7 @@ properties: ngpios: minimum: 1 - maximum: 64 + maximum: 128 "#gpio-cells": const: 2 @@ -46,6 +47,14 @@ properties: minItems: 1 maxItems: 64 + "#interrupt-cells": + const: 2 + + interrupt-controller: true + + resets: + maxItems: 1 + required: - compatible - reg @@ -55,6 +64,23 @@ required: - gpio-ranges - interrupts +allOf: + - if: + properties: + compatible: + contains: + const: loongson,ls2k0300-gpio + then: + required: + - "#interrupt-cells" + - interrupt-controller + - resets + else: + properties: + "#interrupts-cells": false + interrupt-controller: false + resets: false + additionalProperties: false examples: