diff --git a/arch/loongarch/boot/dts/Makefile b/arch/loongarch/boot/dts/Makefile
index 0c59047e8..e4818de05 100644
--- a/arch/loongarch/boot/dts/Makefile
+++ b/arch/loongarch/boot/dts/Makefile
@@ -4,7 +4,7 @@
 
 ifdef CONFIG_DTB_MATCH_BY_BOARD_NAME
 dtb-$(CONFIG_LOONGSON_2K300) += ls2k300_mini_dp.dtb ls2k300_vanguard_pi.dtb ls2k300_gongkong_gbkpgk0.dtb \
-				ls2k300_alientek.dtb ls2k300_99pi_wifi.dtb
+				ls2k300_alientek.dtb ls2k300_99pi_wifi.dtb ls2k300_99pi_tf.dtb
 dtb-$(CONFIG_LOONGSON_2K1000) += ls2k1000_dp.dtb
 
 obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
diff --git a/arch/loongarch/boot/dts/ls2k300_99pi.dtsi b/arch/loongarch/boot/dts/ls2k300_99pi.dtsi
new file mode 100644
index 000000000..fc4c73714
--- /dev/null
+++ b/arch/loongarch/boot/dts/ls2k300_99pi.dtsi
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Loongson Technology Corporation Limited
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon";
+	};
+
+	/* not need memory node, we get memory info from boot params. */
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio 83 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x02000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&gmac0 {
+	status = "okay";
+	phy-handle = <&yt8511h0>;
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		yt8511h0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			motorcomm,led0_cfg = <0x40>; //千兆常亮
+			motorcomm,led1_cfg = <0x30>; //百兆 十兆常亮
+			motorcomm,led2_cfg = <0x2600>; //有数据时闪烁
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "disabled"; // 在 LCD 排线处
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	spi-flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <25000000>;
+		reg = <0>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+
+	spidev0@0 {
+		compatible = "rohm,dh2228fv";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+	};
+};
+
+&spi2 {
+	status = "okay"; // 与 PWM0-3 的 MUX0 冲突
+
+	spidev1@0 {
+		compatible = "rohm,dh2228fv";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+	};
+};
+
+&timers1 {
+	status = "okay";
+	/delete-property/ dmas;
+	/delete-property/ dma-names;
+	pinctrl-0 = <&atim3n_pin_m1>; // LCD PWM 背光，备用
+	pinctrl-names = "default";
+
+	pwm {
+		compatible = "loongson,ls2k-pwm-timer";
+		#pwm-cells = <2>;
+		status = "okay";
+	};
+};
+
+&timers2 {
+	status = "okay";
+	dmas = <&dma 2 0x400>, <&dma 3 0x400>;
+	dma-names = "ch3", "ch4";
+	pinctrl-0 = <&gtim2_pin_m1>, <&gtim3_pin_m1>;
+	pinctrl-names = "default";
+
+	pwm {
+		compatible = "loongson,ls2k-pwm-timer";
+		#pwm-cells = <2>;
+		status = "okay";
+	};
+};
+
+&pwm0 {
+	status = "disabled";
+	pinctrl-0 = <&pwm0_mux_m0>;
+	pinctrl-names = "default";
+};
+
+&pwm1 {
+	status = "disabled";
+	pinctrl-0 = <&pwm1_mux_m0>;
+	pinctrl-names = "default";
+};
+
+&pwm2 {
+	status = "disabled";
+	pinctrl-0 = <&pwm2_mux_m0>;
+	pinctrl-names = "default";
+};
+
+&pwm3 {
+	status = "disabled";
+	pinctrl-0 = <&pwm3_mux_m0>;
+	pinctrl-names = "default";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&can3 {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&sdio1 {
+	cd-gpios = <&gpio 82 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/loongarch/boot/dts/ls2k300_99pi_tf.dts b/arch/loongarch/boot/dts/ls2k300_99pi_tf.dts
new file mode 100644
index 000000000..adb702774
--- /dev/null
+++ b/arch/loongarch/boot/dts/ls2k300_99pi_tf.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include "loongson-2k0300.dtsi"
+#include "loongson_panel_param.dtsi"
+#include "ls2k300_99pi.dtsi"
+
+/ {
+	model = "LS2K300-99PI-TF";
+};
+
+&emmc {
+	status = "disabled";
+};
diff --git a/arch/loongarch/boot/dts/ls2k300_99pi_wifi.dts b/arch/loongarch/boot/dts/ls2k300_99pi_wifi.dts
index c18776b7e..ac9c4211d 100644
--- a/arch/loongarch/boot/dts/ls2k300_99pi_wifi.dts
+++ b/arch/loongarch/boot/dts/ls2k300_99pi_wifi.dts
@@ -7,185 +7,8 @@
 
 #include "loongson-2k0300.dtsi"
 #include "loongson_panel_param.dtsi"
+#include "ls2k300_99pi.dtsi"
 
 / {
 	model = "LS2K300-99PI-WIFI";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-		bootargs = "earlycon";
-	};
-
-	/* not need memory node, we get memory info from boot params. */
-
-	leds {
-		compatible = "gpio-leds";
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio 83 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-			default-state = "on";
-		};
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		linux,cma {
-			compatible = "shared-dma-pool";
-			reusable;
-			size = <0 0x02000000>;
-			linux,cma-default;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&gmac0 {
-	status = "okay";
-	phy-handle = <&yt8511h0>;
-	mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		yt8511h0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			motorcomm,led0_cfg = <0x40>; //千兆常亮
-			motorcomm,led1_cfg = <0x30>; //百兆 十兆常亮
-			motorcomm,led2_cfg = <0x2600>; //有数据时闪烁
-		};
-	};
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "disabled"; // 在 LCD 排线处
-};
-
-&spi0 {
-	status = "okay";
-	pinctrl-0 = <&qspi0_pins>;
-	pinctrl-names = "default";
-
-	spi-flash@0 {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <25000000>;
-		reg = <0>;
-	};
-};
-
-&spi1 {
-	status = "okay";
-
-	spidev0@0 {
-		compatible = "rohm,dh2228fv";
-		reg = <0>;
-		spi-max-frequency = <25000000>;
-	};
-};
-
-&spi2 {
-	status = "okay"; // 与 PWM0-3 的 MUX0 冲突
-
-	spidev1@0 {
-		compatible = "rohm,dh2228fv";
-		reg = <0>;
-		spi-max-frequency = <25000000>;
-	};
-};
-
-&timers1 {
-	status = "okay";
-	/delete-property/ dmas;
-	/delete-property/ dma-names;
-	pinctrl-0 = <&atim3n_pin_m1>; // LCD PWM 背光，备用
-	pinctrl-names = "default";
-
-	pwm {
-		compatible = "loongson,ls2k-pwm-timer";
-		#pwm-cells = <2>;
-		status = "okay";
-	};
-};
-
-&timers2 {
-	status = "okay";
-	dmas = <&dma 2 0x400>, <&dma 3 0x400>;
-	dma-names = "ch3", "ch4";
-	pinctrl-0 = <&gtim2_pin_m1>, <&gtim3_pin_m1>;
-	pinctrl-names = "default";
-
-	pwm {
-		compatible = "loongson,ls2k-pwm-timer";
-		#pwm-cells = <2>;
-		status = "okay";
-	};
-};
-
-&pwm0 {
-	status = "disabled";
-	pinctrl-0 = <&pwm0_mux_m0>;
-	pinctrl-names = "default";
-};
-
-&pwm1 {
-	status = "disabled";
-	pinctrl-0 = <&pwm1_mux_m0>;
-	pinctrl-names = "default";
-};
-
-&pwm2 {
-	status = "disabled";
-	pinctrl-0 = <&pwm2_mux_m0>;
-	pinctrl-names = "default";
-};
-
-&pwm3 {
-	status = "disabled";
-	pinctrl-0 = <&pwm3_mux_m0>;
-	pinctrl-names = "default";
-};
-
-&can2 {
-	status = "okay";
-};
-
-&can3 {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-};
-
-&rtc0 {
-	status = "okay";
-};
-
-&sdio1 {
-	cd-gpios = <&gpio 82 GPIO_ACTIVE_LOW>;
-	status = "okay";
 };
diff --git a/arch/loongarch/include/asm/mach/boot_param.h b/arch/loongarch/include/asm/mach/boot_param.h
index 23284b28d..2a221848e 100644
--- a/arch/loongarch/include/asm/mach/boot_param.h
+++ b/arch/loongarch/include/asm/mach/boot_param.h
@@ -116,6 +116,7 @@ extern u32 __dtb_ls2k300_vanguard_pi_begin[];
 extern u32 __dtb_ls2k300_gongkong_gbkpgk0_begin[];
 extern u32 __dtb_ls2k300_alientek_begin[];
 extern u32 __dtb_ls2k300_99pi_wifi_begin[];
+extern u32 __dtb_ls2k300_99pi_tf_begin[];
 extern char __dtb_start[];
 extern struct boot_params *efi_bp;
 extern struct loongson_board_info b_info;
diff --git a/arch/loongarch/kernel/setup.c b/arch/loongarch/kernel/setup.c
index e44658332..2ed658a26 100644
--- a/arch/loongarch/kernel/setup.c
+++ b/arch/loongarch/kernel/setup.c
@@ -311,6 +311,7 @@ char *board_names[] = {
 	"LS2K300-GONGKONG-GBKPGK0",
 	"LS2K300-ATK-DL2K0300B-V01",
 	"LS2K300-99PI-WIFI",
+	"LS2K300-99PI-TF",
 #endif
 	NULL
 };
@@ -332,6 +333,7 @@ void *fdts[] = {
 	&__dtb_ls2k300_gongkong_gbkpgk0_begin,
 	&__dtb_ls2k300_alientek_begin,
 	&__dtb_ls2k300_99pi_wifi_begin,
+	&__dtb_ls2k300_99pi_tf_begin,
 #endif
 	NULL
 };