mirror of
https://gitee.com/open-loongarch/linux-5.10.git
synced 2026-10-25 20:57:11 +08:00
1.Support RTL8821CU_BT USB-BlueTooth 2.pwm: support analy polarity from dts pwm desc node and setup polarity as normal default 3.2K300 OTG:Optimize otg compatibility 4.FT5426: Fix reset GPIO Dump 5.perf: Fix perf compile error 6.dts:ls2k300:Correct label of spi 7.2K300: drivers/net/can/spi: mcp251x: Fix mcp251x irq bug 8.2K300-G2K03Z02: dts: spi-flash: Lower spi flash frequency 9.2k300: i2c: refactor to improve stablility
2762 lines
67 KiB
C
2762 lines
67 KiB
C
/*
|
|
*
|
|
* Realtek Bluetooth USB driver
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/types.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/dcache.h>
|
|
#include <net/sock.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#include "rtk_bt.h"
|
|
|
|
#define VERSION "3.1"
|
|
|
|
#ifdef BTCOEX
|
|
#include "rtk_coex.h"
|
|
#endif
|
|
|
|
static uint8_t gEVersion = 0xFF;
|
|
|
|
#if HCI_VERSION_CODE >= KERNEL_VERSION(3, 7, 1)
|
|
static bool reset = 0;
|
|
#endif
|
|
|
|
static struct usb_driver btusb_driver;
|
|
static struct usb_device_id btusb_table[] = {
|
|
{
|
|
.match_flags = USB_DEVICE_ID_MATCH_VENDOR |
|
|
USB_DEVICE_ID_MATCH_INT_INFO,
|
|
.idVendor = 0x0bda,
|
|
.bInterfaceClass = 0xe0,
|
|
.bInterfaceSubClass = 0x01,
|
|
.bInterfaceProtocol = 0x01
|
|
}, {
|
|
.match_flags = USB_DEVICE_ID_MATCH_VENDOR |
|
|
USB_DEVICE_ID_MATCH_INT_INFO,
|
|
.idVendor = 0x13d3,
|
|
.bInterfaceClass = 0xe0,
|
|
.bInterfaceSubClass = 0x01,
|
|
.bInterfaceProtocol = 0x01
|
|
}, {
|
|
.match_flags = USB_DEVICE_ID_MATCH_VENDOR |
|
|
USB_DEVICE_ID_MATCH_INT_INFO,
|
|
.idVendor = 0x0489,
|
|
.bInterfaceClass = 0xe0,
|
|
.bInterfaceSubClass = 0x01,
|
|
.bInterfaceProtocol = 0x01
|
|
}, { }
|
|
};
|
|
|
|
static void rtk_free(struct btusb_data *data)
|
|
{
|
|
#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 7, 1)
|
|
kfree(data);
|
|
#endif
|
|
return;
|
|
}
|
|
|
|
static struct btusb_data *rtk_alloc(struct usb_interface *intf)
|
|
{
|
|
struct btusb_data *data;
|
|
#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 7, 1)
|
|
data = kzalloc(sizeof(*data), GFP_KERNEL);
|
|
#else
|
|
data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL);
|
|
#endif
|
|
return data;
|
|
}
|
|
|
|
MODULE_DEVICE_TABLE(usb, btusb_table);
|
|
|
|
static int inc_tx(struct btusb_data *data)
|
|
{
|
|
unsigned long flags;
|
|
int rv;
|
|
|
|
spin_lock_irqsave(&data->txlock, flags);
|
|
rv = test_bit(BTUSB_SUSPENDING, &data->flags);
|
|
if (!rv)
|
|
data->tx_in_flight++;
|
|
spin_unlock_irqrestore(&data->txlock, flags);
|
|
|
|
return rv;
|
|
}
|
|
|
|
#if HCI_VERSION_CODE >= KERNEL_VERSION(3, 18, 0)
|
|
static inline void btusb_free_frags(struct btusb_data *data)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&data->rxlock, flags);
|
|
|
|
kfree_skb(data->evt_skb);
|
|
data->evt_skb = NULL;
|
|
|
|
kfree_skb(data->acl_skb);
|
|
data->acl_skb = NULL;
|
|
|
|
kfree_skb(data->sco_skb);
|
|
data->sco_skb = NULL;
|
|
|
|
spin_unlock_irqrestore(&data->rxlock, flags);
|
|
}
|
|
|
|
static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count)
|
|
{
|
|
struct sk_buff *skb;
|
|
int err = 0;
|
|
|
|
spin_lock(&data->rxlock);
|
|
skb = data->evt_skb;
|
|
|
|
while (count) {
|
|
int len;
|
|
|
|
if (!skb) {
|
|
skb = bt_skb_alloc(HCI_MAX_EVENT_SIZE, GFP_ATOMIC);
|
|
if (!skb) {
|
|
err = -ENOMEM;
|
|
break;
|
|
}
|
|
|
|
bt_cb(skb)->pkt_type = HCI_EVENT_PKT;
|
|
bt_cb(skb)->expect = HCI_EVENT_HDR_SIZE;
|
|
}
|
|
|
|
len = min_t(uint, bt_cb(skb)->expect, count);
|
|
memcpy(skb_put(skb, len), buffer, len);
|
|
|
|
count -= len;
|
|
buffer += len;
|
|
bt_cb(skb)->expect -= len;
|
|
|
|
if (skb->len == HCI_EVENT_HDR_SIZE) {
|
|
/* Complete event header */
|
|
bt_cb(skb)->expect = hci_event_hdr(skb)->plen;
|
|
|
|
if (skb_tailroom(skb) < bt_cb(skb)->expect) {
|
|
kfree_skb(skb);
|
|
skb = NULL;
|
|
|
|
err = -EILSEQ;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (bt_cb(skb)->expect == 0) {
|
|
/* Complete frame */
|
|
hci_recv_frame(data->hdev, skb);
|
|
skb = NULL;
|
|
}
|
|
}
|
|
|
|
data->evt_skb = skb;
|
|
spin_unlock(&data->rxlock);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count)
|
|
{
|
|
struct sk_buff *skb;
|
|
int err = 0;
|
|
|
|
spin_lock(&data->rxlock);
|
|
skb = data->acl_skb;
|
|
|
|
while (count) {
|
|
int len;
|
|
|
|
if (!skb) {
|
|
skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
|
|
if (!skb) {
|
|
err = -ENOMEM;
|
|
break;
|
|
}
|
|
|
|
bt_cb(skb)->pkt_type = HCI_ACLDATA_PKT;
|
|
bt_cb(skb)->expect = HCI_ACL_HDR_SIZE;
|
|
}
|
|
|
|
len = min_t(uint, bt_cb(skb)->expect, count);
|
|
memcpy(skb_put(skb, len), buffer, len);
|
|
|
|
count -= len;
|
|
buffer += len;
|
|
bt_cb(skb)->expect -= len;
|
|
|
|
if (skb->len == HCI_ACL_HDR_SIZE) {
|
|
__le16 dlen = hci_acl_hdr(skb)->dlen;
|
|
|
|
/* Complete ACL header */
|
|
bt_cb(skb)->expect = __le16_to_cpu(dlen);
|
|
|
|
if (skb_tailroom(skb) < bt_cb(skb)->expect) {
|
|
kfree_skb(skb);
|
|
skb = NULL;
|
|
|
|
err = -EILSEQ;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (bt_cb(skb)->expect == 0) {
|
|
/* Complete frame */
|
|
hci_recv_frame(data->hdev, skb);
|
|
skb = NULL;
|
|
}
|
|
}
|
|
|
|
data->acl_skb = skb;
|
|
spin_unlock(&data->rxlock);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int btusb_recv_isoc(struct btusb_data *data, void *buffer, int count)
|
|
{
|
|
struct sk_buff *skb;
|
|
int err = 0;
|
|
|
|
spin_lock(&data->rxlock);
|
|
skb = data->sco_skb;
|
|
|
|
while (count) {
|
|
int len;
|
|
|
|
if (!skb) {
|
|
skb = bt_skb_alloc(HCI_MAX_SCO_SIZE, GFP_ATOMIC);
|
|
if (!skb) {
|
|
err = -ENOMEM;
|
|
break;
|
|
}
|
|
|
|
bt_cb(skb)->pkt_type = HCI_SCODATA_PKT;
|
|
bt_cb(skb)->expect = HCI_SCO_HDR_SIZE;
|
|
}
|
|
|
|
len = min_t(uint, bt_cb(skb)->expect, count);
|
|
memcpy(skb_put(skb, len), buffer, len);
|
|
|
|
count -= len;
|
|
buffer += len;
|
|
bt_cb(skb)->expect -= len;
|
|
|
|
if (skb->len == HCI_SCO_HDR_SIZE) {
|
|
/* Complete SCO header */
|
|
bt_cb(skb)->expect = hci_sco_hdr(skb)->dlen;
|
|
|
|
if (skb_tailroom(skb) < bt_cb(skb)->expect) {
|
|
kfree_skb(skb);
|
|
skb = NULL;
|
|
|
|
err = -EILSEQ;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (bt_cb(skb)->expect == 0) {
|
|
/* Complete frame */
|
|
hci_recv_frame(data->hdev, skb);
|
|
skb = NULL;
|
|
}
|
|
}
|
|
|
|
data->sco_skb = skb;
|
|
spin_unlock(&data->rxlock);
|
|
|
|
return err;
|
|
}
|
|
#endif
|
|
|
|
static void btusb_intr_complete(struct urb *urb)
|
|
{
|
|
struct hci_dev *hdev = urb->context;
|
|
struct btusb_data *data = GET_DRV_DATA(hdev);
|
|
int err;
|
|
|
|
//RTKBT_DBG("%s: urb %p status %d count %d ", __func__,
|
|
//urb, urb->status, urb->actual_length);
|
|
|
|
if (!test_bit(HCI_RUNNING, &hdev->flags))
|
|
return;
|
|
|
|
if (urb->status == 0) {
|
|
hdev->stat.byte_rx += urb->actual_length;
|
|
|
|
#ifdef BTCOEX
|
|
rtk_btcoex_parse_event(urb->transfer_buffer,
|
|
urb->actual_length);
|
|
#endif
|
|
#if HCI_VERSION_CODE < KERNEL_VERSION(3, 18, 0)
|
|
if (hci_recv_fragment(hdev, HCI_EVENT_PKT,
|
|
urb->transfer_buffer,
|
|
urb->actual_length) < 0) {
|
|
RTKBT_ERR("%s: Corrupted event packet", __func__);
|
|
hdev->stat.err_rx++;
|
|
}
|
|
#else
|
|
if (btusb_recv_intr(data, urb->transfer_buffer,
|
|
urb->actual_length) < 0) {
|
|
RTKBT_ERR("%s corrupted event packet", hdev->name);
|
|
hdev->stat.err_rx++;
|
|
}
|
|
#endif
|
|
}
|
|
/* Avoid suspend failed when usb_kill_urb */
|
|
else if (urb->status == -ENOENT) {
|
|
return;
|
|
}
|
|
|
|
if (!test_bit(BTUSB_INTR_RUNNING, &data->flags))
|
|
return;
|
|
|
|
usb_mark_last_busy(data->udev);
|
|
usb_anchor_urb(urb, &data->intr_anchor);
|
|
|
|
err = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (err < 0) {
|
|
/* -EPERM: urb is being killed;
|
|
* -ENODEV: device got disconnected */
|
|
if (err != -EPERM && err != -ENODEV)
|
|
RTKBT_ERR("%s: Failed to re-submit urb %p, err %d",
|
|
__func__, urb, err);
|
|
usb_unanchor_urb(urb);
|
|
}
|
|
}
|
|
|
|
static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags)
|
|
{
|
|
struct btusb_data *data = GET_DRV_DATA(hdev);
|
|
struct urb *urb;
|
|
unsigned char *buf;
|
|
unsigned int pipe;
|
|
int err, size;
|
|
|
|
//RTKBT_DBG("%s", hdev->name);
|
|
|
|
if (!data->intr_ep)
|
|
return -ENODEV;
|
|
|
|
urb = usb_alloc_urb(0, mem_flags);
|
|
if (!urb)
|
|
return -ENOMEM;
|
|
|
|
size = le16_to_cpu(data->intr_ep->wMaxPacketSize);
|
|
|
|
buf = kmalloc(size, mem_flags);
|
|
if (!buf) {
|
|
usb_free_urb(urb);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pipe = usb_rcvintpipe(data->udev, data->intr_ep->bEndpointAddress);
|
|
|
|
usb_fill_int_urb(urb, data->udev, pipe, buf, size,
|
|
btusb_intr_complete, hdev, data->intr_ep->bInterval);
|
|
|
|
urb->transfer_flags |= URB_FREE_BUFFER;
|
|
|
|
usb_anchor_urb(urb, &data->intr_anchor);
|
|
|
|
err = usb_submit_urb(urb, mem_flags);
|
|
if (err < 0) {
|
|
RTKBT_ERR
|
|
("btusb_submit_intr_urb %s urb %p submission failed (%d)",
|
|
hdev->name, urb, -err);
|
|
usb_unanchor_urb(urb);
|
|
}
|
|
|
|
usb_free_urb(urb);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void btusb_bulk_complete(struct urb *urb)
|
|
{
|
|
struct hci_dev *hdev = urb->context;
|
|
struct btusb_data *data = GET_DRV_DATA(hdev);
|
|
int err;
|
|
|
|
//RTKBT_DBG("%s: urb %p status %d count %d",
|
|
//__func__, urb, urb->status, urb->actual_length);
|
|
|
|
if (!test_bit(HCI_RUNNING, &hdev->flags))
|
|
return;
|
|
|
|
#ifdef BTCOEX
|
|
if (urb->status == 0)
|
|
rtk_btcoex_parse_l2cap_data_rx(urb->transfer_buffer,
|
|
urb->actual_length);
|
|
#endif
|
|
|
|
if (urb->status == 0) {
|
|
hdev->stat.byte_rx += urb->actual_length;
|
|
|
|
#if HCI_VERSION_CODE < KERNEL_VERSION(3, 18, 0)
|
|
if (hci_recv_fragment(hdev, HCI_ACLDATA_PKT,
|
|
urb->transfer_buffer,
|
|
urb->actual_length) < 0) {
|
|
RTKBT_ERR("%s: Corrupted ACL packet", __func__);
|
|
hdev->stat.err_rx++;
|
|
}
|
|
#else
|
|
if (data->recv_bulk(data, urb->transfer_buffer,
|
|
urb->actual_length) < 0) {
|
|
RTKBT_ERR("%s corrupted ACL packet", hdev->name);
|
|
hdev->stat.err_rx++;
|
|
}
|
|
#endif
|
|
}
|
|
/* Avoid suspend failed when usb_kill_urb */
|
|
else if (urb->status == -ENOENT) {
|
|
return;
|
|
}
|
|
|
|
if (!test_bit(BTUSB_BULK_RUNNING, &data->flags))
|
|
return;
|
|
|
|
usb_anchor_urb(urb, &data->bulk_anchor);
|
|
usb_mark_last_busy(data->udev);
|
|
|
|
err = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (err < 0) {
|
|
/* -EPERM: urb is being killed;
|
|
* -ENODEV: device got disconnected */
|
|
if (err != -EPERM && err != -ENODEV)
|
|
RTKBT_ERR
|
|
("btusb_bulk_complete %s urb %p failed to resubmit (%d)",
|
|
hdev->name, urb, -err);
|
|
usb_unanchor_urb(urb);
|
|
}
|
|
}
|
|
|
|
static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags)
|
|
{
|
|
struct btusb_data *data = GET_DRV_DATA(hdev);
|
|
struct urb *urb;
|
|
unsigned char *buf;
|
|
unsigned int pipe;
|
|
int err, size = HCI_MAX_FRAME_SIZE;
|
|
|
|
//RTKBT_DBG("%s: hdev name %s", __func__, hdev->name);
|
|
|
|
if (!data->bulk_rx_ep)
|
|
return -ENODEV;
|
|
|
|
urb = usb_alloc_urb(0, mem_flags);
|
|
if (!urb)
|
|
return -ENOMEM;
|
|
|
|
buf = kmalloc(size, mem_flags);
|
|
if (!buf) {
|
|
usb_free_urb(urb);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pipe = usb_rcvbulkpipe(data->udev, data->bulk_rx_ep->bEndpointAddress);
|
|
|
|
usb_fill_bulk_urb(urb, data->udev, pipe,
|
|
buf, size, btusb_bulk_complete, hdev);
|
|
|
|
urb->transfer_flags |= URB_FREE_BUFFER;
|
|
|
|
usb_mark_last_busy(data->udev);
|
|
usb_anchor_urb(urb, &data->bulk_anchor);
|
|
|
|
err = usb_submit_urb(urb, mem_flags);
|
|
if (err < 0) {
|
|
RTKBT_ERR("%s: Failed to submit urb %p, err %d", __func__, urb,
|
|
err);
|
|
usb_unanchor_urb(urb);
|
|
}
|
|
|
|
usb_free_urb(urb);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void btusb_isoc_complete(struct urb *urb)
|
|
{
|
|
struct hci_dev *hdev = urb->context;
|
|
struct btusb_data *data = GET_DRV_DATA(hdev);
|
|
int i, err;
|
|
|
|
/*
|
|
RTKBT_DBG("%s urb %p status %d count %d", hdev->name,
|
|
urb, urb->status, urb->actual_length);
|
|
*/
|
|
if (!test_bit(HCI_RUNNING, &hdev->flags))
|
|
return;
|
|
|
|
if (urb->status == 0) {
|
|
for (i = 0; i < urb->number_of_packets; i++) {
|
|
unsigned int offset = urb->iso_frame_desc[i].offset;
|
|
unsigned int length =
|
|
urb->iso_frame_desc[i].actual_length;
|
|
|
|
if (urb->iso_frame_desc[i].status)
|
|
continue;
|
|
|
|
hdev->stat.byte_rx += length;
|
|
|
|
#if HCI_VERSION_CODE < KERNEL_VERSION(3, 18, 0)
|
|
if (hci_recv_fragment(hdev, HCI_SCODATA_PKT,
|
|
urb->transfer_buffer + offset,
|
|
length) < 0) {
|
|
RTKBT_ERR("%s: Corrupted SCO packet", __func__);
|
|
hdev->stat.err_rx++;
|
|
}
|
|
#else
|
|
if (btusb_recv_isoc(data, urb->transfer_buffer + offset,
|
|
length) < 0) {
|
|
RTKBT_ERR("%s corrupted SCO packet",
|
|
hdev->name);
|
|
hdev->stat.err_rx++;
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
/* Avoid suspend failed when usb_kill_urb */
|
|
else if (urb->status == -ENOENT) {
|
|
return;
|
|
}
|
|
|
|
if (!test_bit(BTUSB_ISOC_RUNNING, &data->flags))
|
|
return;
|
|
|
|
usb_anchor_urb(urb, &data->isoc_anchor);
|
|
i = 0;
|
|
retry:
|
|
err = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (err < 0) {
|
|
/* -EPERM: urb is being killed;
|
|
* -ENODEV: device got disconnected */
|
|
if (err != -EPERM && err != -ENODEV)
|
|
RTKBT_ERR
|
|
("%s: Failed to re-sumbit urb %p, retry %d, err %d",
|
|
__func__, urb, i, err);
|
|
if (i < 10) {
|
|
i++;
|
|
mdelay(1);
|
|
goto retry;
|
|
}
|
|
|
|
usb_unanchor_urb(urb);
|
|
}
|
|
}
|
|
|
|
static inline void __fill_isoc_descriptor(struct urb *urb, int len, int mtu)
|
|
{
|
|
int i, offset = 0;
|
|
|
|
//RTKBT_DBG("len %d mtu %d", len, mtu);
|
|
|
|
for (i = 0; i < BTUSB_MAX_ISOC_FRAMES && len >= mtu;
|
|
i++, offset += mtu, len -= mtu) {
|
|
urb->iso_frame_desc[i].offset = offset;
|
|
urb->iso_frame_desc[i].length = mtu;
|
|
}
|
|
|
|
if (len && i < BTUSB_MAX_ISOC_FRAMES) {
|
|
urb->iso_frame_desc[i].offset = offset;
|
|
urb->iso_frame_desc[i].length = len;
|
|
i++;
|
|
}
|
|
|
|
urb->number_of_packets = i;
|
|
}
|
|
|
|
static int btusb_submit_isoc_urb(struct hci_dev *hdev, gfp_t mem_flags)
|
|
{
|
|
struct btusb_data *data = GET_DRV_DATA(hdev);
|
|
struct urb *urb;
|
|
unsigned char *buf;
|
|
unsigned int pipe;
|
|
int err, size;
|
|
|
|
//RTKBT_DBG("%s", hdev->name);
|
|
|
|
if (!data->isoc_rx_ep)
|
|
return -ENODEV;
|
|
|
|
urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, mem_flags);
|
|
if (!urb)
|
|
return -ENOMEM;
|
|
|
|
size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) *
|
|
BTUSB_MAX_ISOC_FRAMES;
|
|
|
|
buf = kmalloc(size, mem_flags);
|
|
if (!buf) {
|
|
usb_free_urb(urb);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress);
|
|
|
|
urb->dev = data->udev;
|
|
urb->pipe = pipe;
|
|
urb->context = hdev;
|
|
urb->complete = btusb_isoc_complete;
|
|
urb->interval = data->isoc_rx_ep->bInterval;
|
|
|
|
urb->transfer_flags = URB_FREE_BUFFER | URB_ISO_ASAP;
|
|
urb->transfer_buffer = buf;
|
|
urb->transfer_buffer_length = size;
|
|
|
|
__fill_isoc_descriptor(urb, size,
|
|
le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize));
|
|
|
|
usb_anchor_urb(urb, &data->isoc_anchor);
|
|
|
|
err = usb_submit_urb(urb, mem_flags);
|
|
if (err < 0) {
|
|
RTKBT_ERR("%s %s urb %p submission failed (%d)",
|
|
__func__, hdev->name, urb, err);
|
|
usb_unanchor_urb(urb);
|
|
}
|
|
|
|
usb_free_urb(urb);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void btusb_tx_complete(struct urb *urb)
|
|
{
|
|
struct sk_buff *skb = urb->context;
|
|
struct hci_dev *hdev = (struct hci_dev *)skb->dev;
|
|
struct btusb_data *data = GET_DRV_DATA(hdev);
|
|
|
|
// RTKBT_DBG("btusb_tx_complete %s urb %p status %d count %d", hdev->name,
|
|
// urb, urb->status, urb->actual_length);
|
|
|
|
if (!test_bit(HCI_RUNNING, &hdev->flags))
|
|
goto done;
|
|
|
|
if (!urb->status)
|
|
hdev->stat.byte_tx += urb->transfer_buffer_length;
|
|
else
|
|
hdev->stat.err_tx++;
|
|
|
|
done:
|
|
spin_lock(&data->txlock);
|
|
data->tx_in_flight--;
|
|
spin_unlock(&data->txlock);
|
|
|
|
kfree(urb->setup_packet);
|
|
|
|
kfree_skb(skb);
|
|
}
|
|
|
|
static void btusb_isoc_tx_complete(struct urb *urb)
|
|
{
|
|
struct sk_buff *skb = urb->context;
|
|
struct hci_dev *hdev = (struct hci_dev *)skb->dev;
|
|
|
|
//RTKBT_DBG("%s: urb %p status %d count %d",
|
|
//__func__, urb, urb->status, urb->actual_length);
|
|
|
|
if (skb && hdev) {
|
|
if (!test_bit(HCI_RUNNING, &hdev->flags))
|
|
goto done;
|
|
|
|
if (!urb->status)
|
|
hdev->stat.byte_tx += urb->transfer_buffer_length;
|
|
else
|
|
hdev->stat.err_tx++;
|
|
} else
|
|
RTKBT_ERR("%s: skb 0x%p hdev 0x%p", __func__, skb, hdev);
|
|
|
|
done:
|
|
kfree(urb->setup_packet);
|
|
|
|
kfree_skb(skb);
|
|
}
|
|
|
|
static int btusb_open(struct hci_dev *hdev)
|
|
{
|
|
struct btusb_data *data = GET_DRV_DATA(hdev);
|
|
int err;
|
|
|
|
err = usb_autopm_get_interface(data->intf);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
data->intf->needs_remote_wakeup = 1;
|
|
RTKBT_DBG("%s start dev.power.usage_count(0x%x)", __func__,
|
|
atomic_read(&(data->intf->dev.power.usage_count)));
|
|
|
|
/*******************************/
|
|
if (0 == atomic_read(&hdev->promisc)) {
|
|
RTKBT_INFO("btusb_open hdev->promisc ==0");
|
|
err = -1;
|
|
//goto failed;
|
|
}
|
|
|
|
err = download_patch(data->intf);
|
|
if (err < 0)
|
|
goto failed;
|
|
/*******************************/
|
|
|
|
RTKBT_INFO("%s set HCI_RUNNING", __func__);
|
|
if (test_and_set_bit(HCI_RUNNING, &hdev->flags))
|
|
goto done;
|
|
|
|
if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags))
|
|
goto done;
|
|
|
|
err = btusb_submit_intr_urb(hdev, GFP_KERNEL);
|
|
if (err < 0)
|
|
goto failed;
|
|
|
|
err = btusb_submit_bulk_urb(hdev, GFP_KERNEL);
|
|
if (err < 0) {
|
|
mdelay(URB_CANCELING_DELAY_MS); // Added by Realtek
|
|
usb_kill_anchored_urbs(&data->intr_anchor);
|
|
goto failed;
|
|
}
|
|
|
|
set_bit(BTUSB_BULK_RUNNING, &data->flags);
|
|
btusb_submit_bulk_urb(hdev, GFP_KERNEL);
|
|
|
|
done:
|
|
usb_autopm_put_interface(data->intf);
|
|
|
|
#ifdef BTCOEX
|
|
rtk_btcoex_open(hdev);
|
|
#endif
|
|
RTKBT_DBG("%s end dev.power.usage_count(0x%x)", __FUNCTION__,
|
|
atomic_read(&(data->intf->dev.power.usage_count)));
|
|
|
|
return 0;
|
|
|
|
failed:
|
|
clear_bit(BTUSB_INTR_RUNNING, &data->flags);
|
|
clear_bit(HCI_RUNNING, &hdev->flags);
|
|
usb_autopm_put_interface(data->intf);
|
|
RTKBT_ERR("%s failed dev.power.usage_count(0x%x)", __FUNCTION__,
|
|
atomic_read(&(data->intf->dev.power.usage_count)));
|
|
return err;
|
|
}
|
|
|
|
static void btusb_stop_traffic(struct btusb_data *data)
|
|
{
|
|
mdelay(URB_CANCELING_DELAY_MS); // Added by Realtek
|
|
usb_kill_anchored_urbs(&data->intr_anchor);
|
|
usb_kill_anchored_urbs(&data->bulk_anchor);
|
|
usb_kill_anchored_urbs(&data->isoc_anchor);
|
|
}
|
|
|
|
static int btusb_close(struct hci_dev *hdev)
|
|
{
|
|
struct btusb_data *data = GET_DRV_DATA(hdev);
|
|
int err;
|
|
|
|
#if HCI_VERSION_CODE < KERNEL_VERSION(4, 1, 0)
|
|
int i;
|
|
#endif
|
|
|
|
/* When in kernel 4.4.0 and greater, the HCI_RUNNING bit is
|
|
* cleared in hci_dev_do_close(). */
|
|
#if HCI_VERSION_CODE < KERNEL_VERSION(4, 4, 0)
|
|
if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
|
|
return 0;
|
|
#else
|
|
if (test_bit(HCI_RUNNING, &hdev->flags)) {
|
|
RTKBT_ERR("HCI_RUNNING is not cleared before.");
|
|
return -1;
|
|
}
|
|
#endif
|
|
|
|
RTKBT_DBG("btusb_close");
|
|
#if HCI_VERSION_CODE < KERNEL_VERSION(4, 1, 0)
|
|
/*******************************/
|
|
for (i = 0; i < NUM_REASSEMBLY; i++) {
|
|
if (hdev->reassembly[i]) {
|
|
kfree_skb(hdev->reassembly[i]);
|
|
hdev->reassembly[i] = NULL;
|
|
RTKBT_DBG("%s free ressembly i=%d", __FUNCTION__, i);
|
|
}
|
|
}
|
|
/*******************************/
|
|
#endif
|
|
cancel_work_sync(&data->work);
|
|
cancel_work_sync(&data->waker);
|
|
|
|
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
|
|
clear_bit(BTUSB_BULK_RUNNING, &data->flags);
|
|
clear_bit(BTUSB_INTR_RUNNING, &data->flags);
|
|
|
|
btusb_stop_traffic(data);
|
|
#if HCI_VERSION_CODE >= KERNEL_VERSION(3, 18, 0)
|
|
btusb_free_frags(data);
|
|
#endif
|
|
|
|
err = usb_autopm_get_interface(data->intf);
|
|
if (err < 0)
|
|
goto failed;
|
|
|
|
data->intf->needs_remote_wakeup = 0;
|
|
usb_autopm_put_interface(data->intf);
|
|
|
|
#ifdef BTCOEX
|
|
rtk_btcoex_close();
|
|
#endif
|
|
|
|
failed:
|
|
mdelay(URB_CANCELING_DELAY_MS); // Added by Realtek
|
|
usb_scuttle_anchored_urbs(&data->deferred);
|
|
return 0;
|
|
}
|
|
|
|
static int btusb_flush(struct hci_dev *hdev)
|
|
{
|
|
struct btusb_data *data = GET_DRV_DATA(hdev);
|
|
|
|
RTKBT_DBG("%s add delay ", __FUNCTION__);
|
|
mdelay(URB_CANCELING_DELAY_MS); // Added by Realtek
|
|
usb_kill_anchored_urbs(&data->tx_anchor);
|
|
#if HCI_VERSION_CODE >= KERNEL_VERSION(3, 18, 0)
|
|
btusb_free_frags(data);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
const char pkt_ind[][8] = {
|
|
[HCI_COMMAND_PKT] = "cmd",
|
|
[HCI_ACLDATA_PKT] = "acl",
|
|
[HCI_SCODATA_PKT] = "sco",
|
|
};
|
|
|
|
#if HCI_VERSION_CODE >= KERNEL_VERSION(3, 13, 0)
|
|
int btusb_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
|
|
{
|
|
#else
|
|
int btusb_send_frame(struct sk_buff *skb)
|
|
{
|
|
struct hci_dev *hdev = (struct hci_dev *)skb->dev;
|
|
#endif
|
|
|
|
struct btusb_data *data = GET_DRV_DATA(hdev);
|
|
struct usb_ctrlrequest *dr;
|
|
struct urb *urb;
|
|
unsigned int pipe;
|
|
int err;
|
|
|
|
//RTKBT_DBG("%s", hdev->name);
|
|
|
|
if (!test_bit(HCI_RUNNING, &hdev->flags)) {
|
|
/* If the parameter is wrong, the hdev isn't the correct
|
|
* one. Then no HCI commands can be sent.
|
|
* This issue is related to the wrong HCI_VERSION_CODE set */
|
|
RTKBT_ERR("HCI is not running");
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* Before kernel/hci version 3.13.0, the skb->dev is set before
|
|
* entering btusb_send_frame(). So there is no need to set it here.
|
|
*
|
|
* The skb->dev will be used in the callbacks when urb transfer
|
|
* completes. See btusb_tx_complete() and btusb_isoc_tx_complete() */
|
|
#if HCI_VERSION_CODE >= KERNEL_VERSION(3, 13, 0)
|
|
skb->dev = (void *)hdev;
|
|
#endif
|
|
|
|
switch (bt_cb(skb)->pkt_type) {
|
|
case HCI_COMMAND_PKT:
|
|
print_command(skb);
|
|
|
|
#ifdef BTCOEX
|
|
rtk_btcoex_parse_cmd(skb->data, skb->len);
|
|
#endif
|
|
urb = usb_alloc_urb(0, GFP_ATOMIC);
|
|
if (!urb)
|
|
return -ENOMEM;
|
|
|
|
dr = kmalloc(sizeof(*dr), GFP_ATOMIC);
|
|
if (!dr) {
|
|
usb_free_urb(urb);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dr->bRequestType = data->cmdreq_type;
|
|
dr->bRequest = 0;
|
|
dr->wIndex = 0;
|
|
dr->wValue = 0;
|
|
dr->wLength = __cpu_to_le16(skb->len);
|
|
|
|
pipe = usb_sndctrlpipe(data->udev, 0x00);
|
|
|
|
usb_fill_control_urb(urb, data->udev, pipe, (void *)dr,
|
|
skb->data, skb->len, btusb_tx_complete,
|
|
skb);
|
|
|
|
hdev->stat.cmd_tx++;
|
|
break;
|
|
|
|
case HCI_ACLDATA_PKT:
|
|
print_acl(skb, 1);
|
|
#ifdef BTCOEX
|
|
rtk_btcoex_parse_l2cap_data_tx(skb->data, skb->len);
|
|
#endif
|
|
if (!data->bulk_tx_ep)
|
|
return -ENODEV;
|
|
|
|
urb = usb_alloc_urb(0, GFP_ATOMIC);
|
|
if (!urb)
|
|
return -ENOMEM;
|
|
|
|
pipe = usb_sndbulkpipe(data->udev,
|
|
data->bulk_tx_ep->bEndpointAddress);
|
|
|
|
usb_fill_bulk_urb(urb, data->udev, pipe,
|
|
skb->data, skb->len, btusb_tx_complete, skb);
|
|
|
|
hdev->stat.acl_tx++;
|
|
break;
|
|
|
|
case HCI_SCODATA_PKT:
|
|
if (!data->isoc_tx_ep || SCO_NUM < 1)
|
|
return -ENODEV;
|
|
|
|
urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_ATOMIC);
|
|
if (!urb)
|
|
return -ENOMEM;
|
|
|
|
pipe = usb_sndisocpipe(data->udev,
|
|
data->isoc_tx_ep->bEndpointAddress);
|
|
|
|
usb_fill_int_urb(urb, data->udev, pipe,
|
|
skb->data, skb->len, btusb_isoc_tx_complete,
|
|
skb, data->isoc_tx_ep->bInterval);
|
|
|
|
urb->transfer_flags = URB_ISO_ASAP;
|
|
|
|
__fill_isoc_descriptor(urb, skb->len,
|
|
le16_to_cpu(data->isoc_tx_ep->
|
|
wMaxPacketSize));
|
|
|
|
hdev->stat.sco_tx++;
|
|
goto skip_waking;
|
|
|
|
default:
|
|
return -EILSEQ;
|
|
}
|
|
|
|
err = inc_tx(data);
|
|
if (err) {
|
|
usb_anchor_urb(urb, &data->deferred);
|
|
schedule_work(&data->waker);
|
|
err = 0;
|
|
goto done;
|
|
}
|
|
|
|
skip_waking:
|
|
usb_anchor_urb(urb, &data->tx_anchor);
|
|
err = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (err < 0) {
|
|
RTKBT_ERR("%s %s urb %p submission for %s failed, err %d",
|
|
__func__, hdev->name, urb,
|
|
pkt_ind[bt_cb(skb)->pkt_type], err);
|
|
kfree(urb->setup_packet);
|
|
usb_unanchor_urb(urb);
|
|
} else {
|
|
usb_mark_last_busy(data->udev);
|
|
}
|
|
usb_free_urb(urb);
|
|
|
|
done:
|
|
return err;
|
|
}
|
|
|
|
#if HCI_VERSION_CODE < KERNEL_VERSION(3, 4, 0)
|
|
static void btusb_destruct(struct hci_dev *hdev)
|
|
{
|
|
RTKBT_DBG("btusb_destruct %s", hdev->name);
|
|
hci_free_dev(hdev);
|
|
}
|
|
#endif
|
|
|
|
static void btusb_notify(struct hci_dev *hdev, unsigned int evt)
|
|
{
|
|
struct btusb_data *data = GET_DRV_DATA(hdev);
|
|
|
|
RTKBT_DBG("%s: %s evt %d", __func__, hdev->name, evt);
|
|
|
|
if (SCO_NUM != data->sco_num) {
|
|
data->sco_num = SCO_NUM;
|
|
RTKBT_DBG("%s: Update sco num %d", __func__, data->sco_num);
|
|
schedule_work(&data->work);
|
|
}
|
|
}
|
|
|
|
static inline int __set_isoc_interface(struct hci_dev *hdev, int altsetting)
|
|
{
|
|
struct btusb_data *data = GET_DRV_DATA(hdev);
|
|
struct usb_interface *intf = data->isoc;
|
|
struct usb_endpoint_descriptor *ep_desc;
|
|
int i, err;
|
|
|
|
if (!data->isoc)
|
|
return -ENODEV;
|
|
|
|
RTKBT_INFO("set isoc interface: alt %d", altsetting);
|
|
|
|
err = usb_set_interface(data->udev, 1, altsetting);
|
|
if (err < 0) {
|
|
RTKBT_ERR("%s setting interface failed (%d)", hdev->name, -err);
|
|
return err;
|
|
}
|
|
|
|
data->isoc_altsetting = altsetting;
|
|
|
|
data->isoc_tx_ep = NULL;
|
|
data->isoc_rx_ep = NULL;
|
|
|
|
for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
|
|
ep_desc = &intf->cur_altsetting->endpoint[i].desc;
|
|
|
|
if (!data->isoc_tx_ep && usb_endpoint_is_isoc_out(ep_desc)) {
|
|
data->isoc_tx_ep = ep_desc;
|
|
continue;
|
|
}
|
|
|
|
if (!data->isoc_rx_ep && usb_endpoint_is_isoc_in(ep_desc)) {
|
|
data->isoc_rx_ep = ep_desc;
|
|
continue;
|
|
}
|
|
}
|
|
|
|
if (!data->isoc_tx_ep || !data->isoc_rx_ep) {
|
|
RTKBT_ERR("%s invalid SCO descriptors", hdev->name);
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void btusb_work(struct work_struct *work)
|
|
{
|
|
struct btusb_data *data = container_of(work, struct btusb_data, work);
|
|
struct hci_dev *hdev = data->hdev;
|
|
int err;
|
|
int new_alts;
|
|
|
|
RTKBT_DBG("%s: sco num %d", __func__, data->sco_num);
|
|
if (data->sco_num > 0) {
|
|
if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) {
|
|
err =
|
|
usb_autopm_get_interface(data->isoc ? data->
|
|
isoc : data->intf);
|
|
if (err < 0) {
|
|
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
|
|
mdelay(URB_CANCELING_DELAY_MS);
|
|
usb_kill_anchored_urbs(&data->isoc_anchor);
|
|
return;
|
|
}
|
|
|
|
set_bit(BTUSB_DID_ISO_RESUME, &data->flags);
|
|
}
|
|
#if HCI_VERSION_CODE > KERNEL_VERSION(3, 7, 1)
|
|
if (hdev->voice_setting & 0x0020) {
|
|
static const int alts[3] = { 2, 4, 5 };
|
|
new_alts = alts[data->sco_num - 1];
|
|
} else {
|
|
new_alts = data->sco_num;
|
|
}
|
|
if (data->isoc_altsetting != new_alts) {
|
|
#else
|
|
if (data->isoc_altsetting != 2) {
|
|
new_alts = 2;
|
|
#endif
|
|
|
|
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
|
|
mdelay(URB_CANCELING_DELAY_MS);
|
|
usb_kill_anchored_urbs(&data->isoc_anchor);
|
|
|
|
if (__set_isoc_interface(hdev, new_alts) < 0)
|
|
return;
|
|
}
|
|
|
|
if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
|
|
RTKBT_INFO("submit SCO RX urb.");
|
|
if (btusb_submit_isoc_urb(hdev, GFP_KERNEL) < 0)
|
|
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
|
|
else
|
|
btusb_submit_isoc_urb(hdev, GFP_KERNEL);
|
|
}
|
|
} else {
|
|
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
|
|
mdelay(URB_CANCELING_DELAY_MS);
|
|
usb_kill_anchored_urbs(&data->isoc_anchor);
|
|
|
|
__set_isoc_interface(hdev, 0);
|
|
if (test_and_clear_bit(BTUSB_DID_ISO_RESUME, &data->flags))
|
|
usb_autopm_put_interface(data->isoc ? data->
|
|
isoc : data->intf);
|
|
}
|
|
}
|
|
|
|
static void btusb_waker(struct work_struct *work)
|
|
{
|
|
struct btusb_data *data = container_of(work, struct btusb_data, waker);
|
|
int err;
|
|
|
|
err = usb_autopm_get_interface(data->intf);
|
|
RTKBT_DBG("%s start dev.power.usage_count(0x%x)", __FUNCTION__,
|
|
atomic_read(&(data->intf->dev.power.usage_count)));
|
|
if (err < 0)
|
|
return;
|
|
|
|
usb_autopm_put_interface(data->intf);
|
|
RTKBT_DBG("%s end dev.power.usage_count(0x%x)", __FUNCTION__,
|
|
atomic_read(&(data->intf->dev.power.usage_count)));
|
|
}
|
|
|
|
static int btusb_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct usb_endpoint_descriptor *ep_desc;
|
|
struct btusb_data *data;
|
|
struct hci_dev *hdev;
|
|
int i, err, flag1, flag2;
|
|
struct usb_device *udev;
|
|
udev = interface_to_usbdev(intf);
|
|
|
|
RTKBT_DBG("btusb_probe intf->cur_altsetting->desc.bInterfaceNumber %d",
|
|
intf->cur_altsetting->desc.bInterfaceNumber);
|
|
|
|
/* interface numbers are hardcoded in the spec */
|
|
if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
|
|
return -ENODEV;
|
|
|
|
/*******************************/
|
|
flag1 = device_can_wakeup(&udev->dev);
|
|
flag2 = device_may_wakeup(&udev->dev);
|
|
RTKBT_DBG("btusb_probe can_wakeup %x, may wakeup %x", flag1, flag2);
|
|
#if BTUSB_WAKEUP_HOST
|
|
device_wakeup_enable(&udev->dev);
|
|
#endif
|
|
//device_wakeup_enable(&udev->dev);
|
|
/*device_wakeup_disable(&udev->dev);
|
|
flag1=device_can_wakeup(&udev->dev);
|
|
flag2=device_may_wakeup(&udev->dev);
|
|
RTKBT_DBG("btusb_probe can_wakeup=%x flag2=%x",flag1,flag2);
|
|
*/
|
|
err = patch_add(intf);
|
|
if (err < 0)
|
|
return -1;
|
|
/*******************************/
|
|
|
|
data = rtk_alloc(intf);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
|
|
ep_desc = &intf->cur_altsetting->endpoint[i].desc;
|
|
|
|
if (!data->intr_ep && usb_endpoint_is_int_in(ep_desc)) {
|
|
data->intr_ep = ep_desc;
|
|
continue;
|
|
}
|
|
|
|
if (!data->bulk_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) {
|
|
data->bulk_tx_ep = ep_desc;
|
|
continue;
|
|
}
|
|
|
|
if (!data->bulk_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) {
|
|
data->bulk_rx_ep = ep_desc;
|
|
continue;
|
|
}
|
|
}
|
|
|
|
if (!data->intr_ep || !data->bulk_tx_ep || !data->bulk_rx_ep) {
|
|
rtk_free(data);
|
|
return -ENODEV;
|
|
}
|
|
|
|
data->cmdreq_type = USB_TYPE_CLASS;
|
|
|
|
data->udev = interface_to_usbdev(intf);
|
|
data->intf = intf;
|
|
|
|
spin_lock_init(&data->lock);
|
|
|
|
INIT_WORK(&data->work, btusb_work);
|
|
INIT_WORK(&data->waker, btusb_waker);
|
|
spin_lock_init(&data->txlock);
|
|
|
|
init_usb_anchor(&data->tx_anchor);
|
|
init_usb_anchor(&data->intr_anchor);
|
|
init_usb_anchor(&data->bulk_anchor);
|
|
init_usb_anchor(&data->isoc_anchor);
|
|
init_usb_anchor(&data->deferred);
|
|
|
|
#if HCI_VERSION_CODE >= KERNEL_VERSION(3, 18, 0)
|
|
spin_lock_init(&data->rxlock);
|
|
data->recv_bulk = btusb_recv_bulk;
|
|
#endif
|
|
|
|
hdev = hci_alloc_dev();
|
|
if (!hdev) {
|
|
rtk_free(data);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
HDEV_BUS = HCI_USB;
|
|
|
|
data->hdev = hdev;
|
|
|
|
SET_HCIDEV_DEV(hdev, &intf->dev);
|
|
|
|
hdev->open = btusb_open;
|
|
hdev->close = btusb_close;
|
|
hdev->flush = btusb_flush;
|
|
hdev->send = btusb_send_frame;
|
|
hdev->notify = btusb_notify;
|
|
|
|
#if HCI_VERSION_CODE >= KERNEL_VERSION(3, 4, 0)
|
|
hci_set_drvdata(hdev, data);
|
|
#else
|
|
hdev->driver_data = data;
|
|
hdev->destruct = btusb_destruct;
|
|
hdev->owner = THIS_MODULE;
|
|
#endif
|
|
|
|
#if HCI_VERSION_CODE >= KERNEL_VERSION(3, 7, 1)
|
|
if (!reset)
|
|
set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
|
|
RTKBT_DBG("set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);");
|
|
#endif
|
|
|
|
/* Interface numbers are hardcoded in the specification */
|
|
data->isoc = usb_ifnum_to_if(data->udev, 1);
|
|
|
|
if (data->isoc) {
|
|
err = usb_driver_claim_interface(&btusb_driver,
|
|
data->isoc, data);
|
|
if (err < 0) {
|
|
hci_free_dev(hdev);
|
|
rtk_free(data);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
/* Should reset the gEVersion to 0xff, otherwise the stored gEVersion
|
|
* would cause rtk_get_eversion() returning previous gEVersion if
|
|
* change to different ECO chip.
|
|
* This would cause downloading wrong patch, and the controller can't
|
|
* work. */
|
|
RTKBT_DBG("%s: Reset gEVersion to 0xff", __func__);
|
|
gEVersion = 0xff;
|
|
|
|
err = hci_register_dev(hdev);
|
|
if (err < 0) {
|
|
hci_free_dev(hdev);
|
|
rtk_free(data);
|
|
return err;
|
|
}
|
|
|
|
usb_set_intfdata(intf, data);
|
|
|
|
#ifdef BTCOEX
|
|
rtk_btcoex_probe(hdev);
|
|
#endif
|
|
|
|
RTKBT_DBG("%s: done", __func__);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void btusb_disconnect(struct usb_interface *intf)
|
|
{
|
|
struct btusb_data *data = usb_get_intfdata(intf);
|
|
struct hci_dev *hdev;
|
|
struct usb_device *udev;
|
|
udev = interface_to_usbdev(intf);
|
|
|
|
if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
|
|
return;
|
|
|
|
if (!data)
|
|
return;
|
|
|
|
RTKBT_DBG("btusb_disconnect");
|
|
/*******************************/
|
|
patch_remove(intf);
|
|
/*******************************/
|
|
|
|
hdev = data->hdev;
|
|
|
|
#if HCI_VERSION_CODE < KERNEL_VERSION(3, 4, 0)
|
|
__hci_dev_hold(hdev);
|
|
#endif
|
|
|
|
usb_set_intfdata(data->intf, NULL);
|
|
|
|
if (data->isoc)
|
|
usb_set_intfdata(data->isoc, NULL);
|
|
|
|
hci_unregister_dev(hdev);
|
|
|
|
if (intf == data->isoc)
|
|
usb_driver_release_interface(&btusb_driver, data->intf);
|
|
else if (data->isoc)
|
|
usb_driver_release_interface(&btusb_driver, data->isoc);
|
|
|
|
#if HCI_VERSION_CODE < KERNEL_VERSION(3, 4, 0)
|
|
__hci_dev_put(hdev);
|
|
#endif
|
|
|
|
#if HCI_VERSION_CODE >= KERNEL_VERSION(3, 18, 0)
|
|
btusb_free_frags(data);
|
|
#endif
|
|
|
|
hci_free_dev(hdev);
|
|
rtk_free(data);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int btusb_suspend(struct usb_interface *intf, pm_message_t message)
|
|
{
|
|
struct btusb_data *data = usb_get_intfdata(intf);
|
|
|
|
if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
|
|
return 0;
|
|
|
|
/*******************************/
|
|
RTKBT_DBG("btusb_suspend message.event 0x%x, data->suspend_count %d",
|
|
message.event, data->suspend_count);
|
|
if (!test_bit(HCI_RUNNING, &data->hdev->flags)) {
|
|
RTKBT_DBG("btusb_suspend-----bt is off");
|
|
set_btoff(data->intf);
|
|
}
|
|
/*******************************/
|
|
|
|
if (data->suspend_count++)
|
|
return 0;
|
|
|
|
spin_lock_irq(&data->txlock);
|
|
if (!((message.event & PM_EVENT_AUTO) && data->tx_in_flight)) {
|
|
set_bit(BTUSB_SUSPENDING, &data->flags);
|
|
spin_unlock_irq(&data->txlock);
|
|
RTKBT_INFO("%s: suspending...", __func__);
|
|
} else {
|
|
spin_unlock_irq(&data->txlock);
|
|
data->suspend_count--;
|
|
return -EBUSY;
|
|
}
|
|
|
|
cancel_work_sync(&data->work);
|
|
|
|
btusb_stop_traffic(data);
|
|
mdelay(URB_CANCELING_DELAY_MS); // Added by Realtek
|
|
usb_kill_anchored_urbs(&data->tx_anchor);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void play_deferred(struct btusb_data *data)
|
|
{
|
|
struct urb *urb;
|
|
int err;
|
|
|
|
while ((urb = usb_get_from_anchor(&data->deferred))) {
|
|
/************************************/
|
|
usb_anchor_urb(urb, &data->tx_anchor);
|
|
err = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (err < 0) {
|
|
RTKBT_ERR("play_deferred urb %p submission failed",
|
|
urb);
|
|
kfree(urb->setup_packet);
|
|
usb_unanchor_urb(urb);
|
|
} else {
|
|
usb_mark_last_busy(data->udev);
|
|
}
|
|
usb_free_urb(urb);
|
|
/************************************/
|
|
data->tx_in_flight++;
|
|
}
|
|
mdelay(URB_CANCELING_DELAY_MS); // Added by Realtek
|
|
usb_scuttle_anchored_urbs(&data->deferred);
|
|
}
|
|
|
|
static int btusb_resume(struct usb_interface *intf)
|
|
{
|
|
struct btusb_data *data = usb_get_intfdata(intf);
|
|
struct hci_dev *hdev = data->hdev;
|
|
int err = 0;
|
|
|
|
if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
|
|
return 0;
|
|
|
|
/*******************************/
|
|
RTKBT_DBG("%s: data->suspend_count %d", __func__, data->suspend_count);
|
|
|
|
/* if intf->needs_binding is set, driver will be rebind.
|
|
* The probe will be called instead of resume */
|
|
/* if (!test_bit(HCI_RUNNING, &hdev->flags)) {
|
|
* RTKBT_DBG("btusb_resume-----bt is off,download patch");
|
|
* download_patch(intf);
|
|
* } else
|
|
* RTKBT_DBG("btusb_resume,----bt is on");
|
|
*/
|
|
/*******************************/
|
|
if (--data->suspend_count)
|
|
return 0;
|
|
|
|
if (test_bit(BTUSB_INTR_RUNNING, &data->flags)) {
|
|
err = btusb_submit_intr_urb(hdev, GFP_NOIO);
|
|
if (err < 0) {
|
|
clear_bit(BTUSB_INTR_RUNNING, &data->flags);
|
|
goto failed;
|
|
}
|
|
}
|
|
|
|
if (test_bit(BTUSB_BULK_RUNNING, &data->flags)) {
|
|
err = btusb_submit_bulk_urb(hdev, GFP_NOIO);
|
|
if (err < 0) {
|
|
clear_bit(BTUSB_BULK_RUNNING, &data->flags);
|
|
goto failed;
|
|
}
|
|
|
|
btusb_submit_bulk_urb(hdev, GFP_NOIO);
|
|
}
|
|
|
|
if (test_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
|
|
if (btusb_submit_isoc_urb(hdev, GFP_NOIO) < 0)
|
|
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
|
|
else
|
|
btusb_submit_isoc_urb(hdev, GFP_NOIO);
|
|
}
|
|
|
|
spin_lock_irq(&data->txlock);
|
|
play_deferred(data);
|
|
clear_bit(BTUSB_SUSPENDING, &data->flags);
|
|
spin_unlock_irq(&data->txlock);
|
|
schedule_work(&data->work);
|
|
|
|
RTKBT_DBG("%s: data->suspend_count %d, done", __func__,
|
|
data->suspend_count);
|
|
|
|
return 0;
|
|
|
|
failed:
|
|
mdelay(URB_CANCELING_DELAY_MS); // Added by Realtek
|
|
usb_scuttle_anchored_urbs(&data->deferred);
|
|
//done:
|
|
spin_lock_irq(&data->txlock);
|
|
clear_bit(BTUSB_SUSPENDING, &data->flags);
|
|
spin_unlock_irq(&data->txlock);
|
|
RTKBT_DBG("%s: data->suspend_count %d, fail", __func__,
|
|
data->suspend_count);
|
|
|
|
return err;
|
|
}
|
|
#endif
|
|
|
|
static struct usb_driver btusb_driver = {
|
|
.name = "rtk_btusb",
|
|
.probe = btusb_probe,
|
|
.disconnect = btusb_disconnect,
|
|
#ifdef CONFIG_PM
|
|
.suspend = btusb_suspend,
|
|
.resume = btusb_resume,
|
|
#endif
|
|
.id_table = btusb_table,
|
|
.supports_autosuspend = 1,
|
|
#if LINUX_VERSION_CODE > KERNEL_VERSION(3, 7, 1)
|
|
.disable_hub_initiated_lpm = 1,
|
|
#endif
|
|
};
|
|
|
|
static int __init btusb_init(void)
|
|
{
|
|
RTKBT_DBG("Realtek Bluetooth USB driver ver %s", VERSION);
|
|
#ifdef BTCOEX
|
|
rtk_btcoex_init();
|
|
#endif
|
|
return usb_register(&btusb_driver);
|
|
}
|
|
|
|
static void __exit btusb_exit(void)
|
|
{
|
|
RTKBT_DBG("rtk_btusb: btusb_exit");
|
|
usb_deregister(&btusb_driver);
|
|
|
|
#ifdef BTCOEX
|
|
rtk_btcoex_exit();
|
|
#endif
|
|
}
|
|
|
|
module_init(btusb_init);
|
|
module_exit(btusb_exit);
|
|
|
|
MODULE_AUTHOR("");
|
|
MODULE_DESCRIPTION("Realtek Bluetooth USB driver ver " VERSION);
|
|
MODULE_VERSION(VERSION);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/*******************************
|
|
** Reasil patch code
|
|
********************************/
|
|
#define CMD_CMP_EVT 0x0e
|
|
#define PKT_LEN 300
|
|
#define MSG_TO 1000 //us
|
|
#define PATCH_SEG_MAX 252
|
|
/* #define PATCH_LENGTH_MAX 24576 */ //24*1024
|
|
#define PATCH_LENGTH_MAX (40 * 1024)
|
|
#define DATA_END 0x80
|
|
#define DOWNLOAD_OPCODE 0xfc20
|
|
#define BTOFF_OPCODE 0xfc28
|
|
#define TRUE 1
|
|
#define FALSE 0
|
|
#define CMD_HDR_LEN sizeof(struct hci_command_hdr)
|
|
#define EVT_HDR_LEN sizeof(struct hci_event_hdr)
|
|
#define CMD_CMP_LEN sizeof(struct hci_ev_cmd_complete)
|
|
|
|
//signature: Realtech
|
|
const uint8_t RTK_EPATCH_SIGNATURE[8] =
|
|
{ 0x52, 0x65, 0x61, 0x6C, 0x74, 0x65, 0x63, 0x68 };
|
|
//Extension Section IGNATURE:0x77FD0451
|
|
const uint8_t Extension_Section_SIGNATURE[4] = { 0x51, 0x04, 0xFD, 0x77 };
|
|
|
|
uint16_t project_id[] = {
|
|
ROM_LMP_8723a,
|
|
ROM_LMP_8723b,
|
|
ROM_LMP_8821a,
|
|
ROM_LMP_8761a,
|
|
ROM_LMP_NONE,
|
|
ROM_LMP_NONE,
|
|
ROM_LMP_NONE,
|
|
ROM_LMP_NONE,
|
|
ROM_LMP_8822b,
|
|
ROM_LMP_8723b, /* RTL8723DU */
|
|
ROM_LMP_8821a, /* RTL8821CU */
|
|
ROM_LMP_NONE
|
|
};
|
|
|
|
enum rtk_endpoit {
|
|
CTRL_EP = 0,
|
|
INTR_EP = 1,
|
|
BULK_EP = 2,
|
|
ISOC_EP = 3
|
|
};
|
|
|
|
typedef struct {
|
|
uint16_t prod_id;
|
|
uint16_t lmp_sub;
|
|
char *mp_patch_name;
|
|
char *patch_name;
|
|
char *config_name;
|
|
|
|
/* TODO: Remove the following avariables */
|
|
uint8_t *fw_cache1;
|
|
int fw_len1;
|
|
} patch_info;
|
|
|
|
typedef struct {
|
|
struct list_head list_node;
|
|
struct usb_interface *intf;
|
|
struct usb_device *udev;
|
|
struct notifier_block pm_notifier;
|
|
patch_info *patch_entry;
|
|
} dev_data;
|
|
|
|
typedef struct {
|
|
dev_data *dev_entry;
|
|
int pipe_in, pipe_out;
|
|
uint8_t *send_pkt;
|
|
uint8_t *rcv_pkt;
|
|
struct hci_command_hdr *cmd_hdr;
|
|
struct hci_event_hdr *evt_hdr;
|
|
struct hci_ev_cmd_complete *cmd_cmp;
|
|
uint8_t *req_para, *rsp_para;
|
|
uint8_t *fw_data;
|
|
int pkt_len, fw_len;
|
|
} xchange_data;
|
|
|
|
typedef struct {
|
|
uint8_t index;
|
|
uint8_t data[PATCH_SEG_MAX];
|
|
} __attribute__ ((packed)) download_cp;
|
|
|
|
typedef struct {
|
|
uint8_t status;
|
|
uint8_t index;
|
|
} __attribute__ ((packed)) download_rp;
|
|
|
|
#define RTK_VENDOR_CONFIG_MAGIC 0x8723ab55
|
|
struct rtk_bt_vendor_config_entry {
|
|
uint16_t offset;
|
|
uint8_t entry_len;
|
|
uint8_t entry_data[0];
|
|
} __attribute__ ((packed));
|
|
|
|
struct rtk_bt_vendor_config {
|
|
uint32_t signature;
|
|
uint16_t data_len;
|
|
struct rtk_bt_vendor_config_entry entry[0];
|
|
} __attribute__ ((packed));
|
|
|
|
static dev_data *dev_data_find(struct usb_interface *intf);
|
|
static patch_info *get_patch_entry(struct usb_device *udev);
|
|
static int rtkbt_pm_notify(struct notifier_block *notifier, ulong pm_event,
|
|
void *unused);
|
|
static int load_firmware(dev_data * dev_entry, uint8_t ** buff);
|
|
static void init_xdata(xchange_data * xdata, dev_data * dev_entry);
|
|
static int check_fw_version(xchange_data * xdata);
|
|
static int download_data(xchange_data * xdata);
|
|
static int send_hci_cmd(xchange_data * xdata);
|
|
static int rcv_hci_evt(xchange_data * xdata);
|
|
static uint8_t rtk_get_eversion(dev_data * dev_entry);
|
|
|
|
static patch_info fw_patch_table[] = {
|
|
/* { pid, lmp_sub, mp_fw_name, fw_name, config_name, fw_cache, fw_len } */
|
|
{0x1724, 0x1200, "mp_rtl8723a_fw", "rtl8723a_fw", "rtl8723a_config", NULL, 0}, /* RTL8723A */
|
|
{0x8723, 0x1200, "mp_rtl8723a_fw", "rtl8723a_fw", "rtl8723a_config", NULL, 0}, /* 8723AE */
|
|
{0xA723, 0x1200, "mp_rtl8723a_fw", "rtl8723a_fw", "rtl8723a_config", NULL, 0}, /* 8723AE for LI */
|
|
{0x0723, 0x1200, "mp_rtl8723a_fw", "rtl8723a_fw", "rtl8723a_config", NULL, 0}, /* 8723AE */
|
|
{0x3394, 0x1200, "mp_rtl8723a_fw", "rtl8723a_fw", "rtl8723a_config", NULL, 0}, /* 8723AE for Azurewave */
|
|
|
|
{0x0724, 0x1200, "mp_rtl8723a_fw", "rtl8723a_fw", "rtl8723a_config", NULL, 0}, /* 8723AU */
|
|
{0x8725, 0x1200, "mp_rtl8723a_fw", "rtl8723a_fw", "rtl8723a_config", NULL, 0}, /* 8723AU */
|
|
{0x872A, 0x1200, "mp_rtl8723a_fw", "rtl8723a_fw", "rtl8723a_config", NULL, 0}, /* 8723AU */
|
|
{0x872B, 0x1200, "mp_rtl8723a_fw", "rtl8723a_fw", "rtl8723a_config", NULL, 0}, /* 8723AU */
|
|
|
|
{0xb720, 0x8723, "mp_rtl8723b_fw", "rtl8723b_fw", "rtl8723bu_config", NULL, 0}, /* RTL8723BU */
|
|
{0xb72A, 0x8723, "mp_rtl8723b_fw", "rtl8723b_fw", "rtl8723bu_config", NULL, 0}, /* RTL8723BU */
|
|
{0xb728, 0x8723, "mp_rtl8723b_fw", "rtl8723b_fw", "rtl8723b_config", NULL, 0}, /* RTL8723BE for LC */
|
|
{0xb723, 0x8723, "mp_rtl8723b_fw", "rtl8723b_fw", "rtl8723b_config", NULL, 0}, /* RTL8723BE */
|
|
{0xb72B, 0x8723, "mp_rtl8723b_fw", "rtl8723b_fw", "rtl8723b_config", NULL, 0}, /* RTL8723BE */
|
|
{0xb001, 0x8723, "mp_rtl8723b_fw", "rtl8723b_fw", "rtl8723b_config", NULL, 0}, /* RTL8723BE for HP */
|
|
{0xb002, 0x8723, "mp_rtl8723b_fw", "rtl8723b_fw", "rtl8723b_config", NULL, 0}, /* RTL8723BE */
|
|
{0xb003, 0x8723, "mp_rtl8723b_fw", "rtl8723b_fw", "rtl8723b_config", NULL, 0}, /* RTL8723BE */
|
|
{0xb004, 0x8723, "mp_rtl8723b_fw", "rtl8723b_fw", "rtl8723b_config", NULL, 0}, /* RTL8723BE */
|
|
{0xb005, 0x8723, "mp_rtl8723b_fw", "rtl8723b_fw", "rtl8723b_config", NULL, 0}, /* RTL8723BE */
|
|
|
|
{0x3410, 0x8723, "mp_rtl8723b_fw", "rtl8723b_fw", "rtl8723b_config", NULL, 0}, /* RTL8723BE for Azurewave */
|
|
{0x3416, 0x8723, "mp_rtl8723b_fw", "rtl8723b_fw", "rtl8723b_config", NULL, 0}, /* RTL8723BE for Azurewave */
|
|
{0x3459, 0x8723, "mp_rtl8723b_fw", "rtl8723b_fw", "rtl8723b_config", NULL, 0}, /* RTL8723BE for Azurewave */
|
|
{0xE085, 0x8723, "mp_rtl8723b_fw", "rtl8723b_fw", "rtl8723b_config", NULL, 0}, /* RTL8723BE for Foxconn */
|
|
{0xE08B, 0x8723, "mp_rtl8723b_fw", "rtl8723b_fw", "rtl8723b_config", NULL, 0}, /* RTL8723BE for Foxconn */
|
|
{0xE09E, 0x8723, "mp_rtl8723b_fw", "rtl8723b_fw", "rtl8723b_config", NULL, 0}, /* RTL8723BE for Foxconn */
|
|
|
|
{0xA761, 0x8761, "mp_rtl8761a_fw", "rtl8761au_fw", "rtl8761a_config", NULL, 0}, /* RTL8761AU only */
|
|
{0x818B, 0x8761, "mp_rtl8761a_fw", "rtl8761aw_fw", "rtl8761aw_config", NULL, 0}, /* RTL8761AW + 8192EU */
|
|
{0x818C, 0x8761, "mp_rtl8761a_fw", "rtl8761aw_fw", "rtl8761aw_config", NULL, 0}, /* RTL8761AW + 8192EU */
|
|
{0x8760, 0x8761, "mp_rtl8761a_fw", "rtl8761au_fw", "rtl8761a_config", NULL, 0}, /* RTL8761AU + 8192EE */
|
|
{0xB761, 0x8761, "mp_rtl8761a_fw", "rtl8761au_fw", "rtl8761a_config", NULL, 0}, /* RTL8761AU + 8192EE */
|
|
{0x8761, 0x8761, "mp_rtl8761a_fw", "rtl8761au_fw", "rtl8761a_config", NULL, 0}, /* RTL8761AU + 8192EE for LI */
|
|
{0x8A60, 0x8761, "mp_rtl8761a_fw", "rtl8761au_fw", "rtl8761a_config", NULL, 0}, /* RTL8761AU + 8812AE */
|
|
|
|
{0x8821, 0x8821, "mp_rtl8821a_fw", "rtl8821a_fw", "rtl8821a_config", NULL, 0}, /* RTL8821AE */
|
|
{0x0821, 0x8821, "mp_rtl8821a_fw", "rtl8821a_fw", "rtl8821a_config", NULL, 0}, /* RTL8821AE */
|
|
{0x0823, 0x8821, "mp_rtl8821a_fw", "rtl8821a_fw", "rtl8821a_config", NULL, 0}, /* RTL8821AU */
|
|
{0x3414, 0x8821, "mp_rtl8821a_fw", "rtl8821a_fw", "rtl8821a_config", NULL, 0}, /* RTL8821AE */
|
|
{0x3458, 0x8821, "mp_rtl8821a_fw", "rtl8821a_fw", "rtl8821a_config", NULL, 0}, /* RTL8821AE */
|
|
{0x3461, 0x8821, "mp_rtl8821a_fw", "rtl8821a_fw", "rtl8821a_config", NULL, 0}, /* RTL8821AE */
|
|
{0x3462, 0x8821, "mp_rtl8821a_fw", "rtl8821a_fw", "rtl8821a_config", NULL, 0}, /* RTL8821AE */
|
|
|
|
{0xb82c, 0x8822, "mp_rtl8822bu_fw", "rtl8822bu_fw", "rtl8822bu_config", NULL, 0}, /* RTL8822BU */
|
|
{0xd723, 0x8723, "mp_rtl8723du_fw", "rtl8723du_fw", "rtl8723du_config", NULL, 0}, /* RTL8723DU */
|
|
{0xb820, 0x8821, "mp_rtl8821cu_fw", "rtl8821cu_fw", "rtl8821cu_config", NULL, 0 }, /* RTL8821CU */
|
|
{0xc820, 0x8821, "mp_rtl8821cu_fw", "rtl8821cu_fw", "rtl8821cu_config", NULL, 0 }, /* RTL8821CU */
|
|
|
|
/* NOTE: must append patch entries above the null entry */
|
|
{0, 0, NULL, NULL, NULL, NULL, 0}
|
|
};
|
|
|
|
static LIST_HEAD(dev_data_list);
|
|
|
|
int patch_add(struct usb_interface *intf)
|
|
{
|
|
dev_data *dev_entry;
|
|
struct usb_device *udev;
|
|
|
|
RTKBT_DBG("patch_add");
|
|
dev_entry = dev_data_find(intf);
|
|
if (NULL != dev_entry) {
|
|
return -1;
|
|
}
|
|
|
|
udev = interface_to_usbdev(intf);
|
|
#if BTUSB_RPM
|
|
RTKBT_DBG("auto suspend is enabled");
|
|
usb_enable_autosuspend(udev);
|
|
pm_runtime_set_autosuspend_delay(&(udev->dev), 2000);
|
|
#else
|
|
RTKBT_DBG("auto suspend is disabled");
|
|
usb_disable_autosuspend(udev);
|
|
#endif
|
|
|
|
dev_entry = kzalloc(sizeof(dev_data), GFP_KERNEL);
|
|
dev_entry->intf = intf;
|
|
dev_entry->udev = udev;
|
|
dev_entry->pm_notifier.notifier_call = rtkbt_pm_notify;
|
|
dev_entry->patch_entry = get_patch_entry(udev);
|
|
if (NULL == dev_entry->patch_entry) {
|
|
kfree(dev_entry);
|
|
return -1;
|
|
}
|
|
list_add(&dev_entry->list_node, &dev_data_list);
|
|
register_pm_notifier(&dev_entry->pm_notifier);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void patch_remove(struct usb_interface *intf)
|
|
{
|
|
dev_data *dev_entry;
|
|
struct usb_device *udev;
|
|
|
|
udev = interface_to_usbdev(intf);
|
|
#if BTUSB_RPM
|
|
usb_disable_autosuspend(udev);
|
|
#endif
|
|
|
|
dev_entry = dev_data_find(intf);
|
|
if (NULL == dev_entry) {
|
|
return;
|
|
}
|
|
|
|
RTKBT_DBG("patch_remove");
|
|
list_del(&dev_entry->list_node);
|
|
unregister_pm_notifier(&dev_entry->pm_notifier);
|
|
kfree(dev_entry);
|
|
}
|
|
|
|
static int send_reset_command(xchange_data *xdata)
|
|
{
|
|
int ret_val;
|
|
|
|
RTKBT_DBG("HCI reset.");
|
|
|
|
xdata->cmd_hdr->opcode = cpu_to_le16(HCI_OP_RESET);
|
|
xdata->cmd_hdr->plen = 0;
|
|
xdata->pkt_len = CMD_HDR_LEN;
|
|
|
|
ret_val = send_hci_cmd(xdata);
|
|
if (ret_val < 0) {
|
|
RTKBT_ERR("failed to send hci cmd.");
|
|
return ret_val;
|
|
}
|
|
|
|
ret_val = rcv_hci_evt(xdata);
|
|
if (ret_val < 0) {
|
|
RTKBT_ERR("failed to recv hci event.");
|
|
return ret_val;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int download_patch(struct usb_interface *intf)
|
|
{
|
|
dev_data *dev_entry;
|
|
xchange_data *xdata = NULL;
|
|
uint8_t *fw_buf;
|
|
int ret_val;
|
|
|
|
RTKBT_DBG("download_patch start");
|
|
dev_entry = dev_data_find(intf);
|
|
if (NULL == dev_entry) {
|
|
ret_val = -1;
|
|
RTKBT_ERR("NULL == dev_entry");
|
|
goto patch_end;
|
|
}
|
|
|
|
xdata = kzalloc(sizeof(xchange_data), GFP_KERNEL);
|
|
if (NULL == xdata) {
|
|
ret_val = -1;
|
|
RTKBT_DBG("NULL == xdata");
|
|
goto patch_end;
|
|
}
|
|
|
|
init_xdata(xdata, dev_entry);
|
|
|
|
ret_val = check_fw_version(xdata);
|
|
if (ret_val < 0) {
|
|
RTKBT_ERR("Failed to get Local Version Information");
|
|
goto patch_end;
|
|
|
|
} else if (ret_val > 0) {
|
|
RTKBT_DBG("Firmware already exists");
|
|
/* Patch alread exists, just return */
|
|
if (gEVersion == 0xff) {
|
|
RTKBT_DBG("global_version is not set, get it!");
|
|
gEVersion = rtk_get_eversion(dev_entry);
|
|
}
|
|
goto patch_end;
|
|
}
|
|
|
|
xdata->fw_len = load_firmware(dev_entry, &xdata->fw_data);
|
|
if (xdata->fw_len <= 0) {
|
|
RTKBT_ERR("load firmware failed!");
|
|
goto patch_end;
|
|
}
|
|
|
|
fw_buf = xdata->fw_data;
|
|
|
|
if (xdata->fw_len > PATCH_LENGTH_MAX) {
|
|
RTKBT_ERR("FW/CONFIG total length larger than allowed!");
|
|
goto patch_fail;
|
|
}
|
|
|
|
ret_val = download_data(xdata);
|
|
if (ret_val < 0) {
|
|
RTKBT_ERR("download_data failed, err %d", ret_val);
|
|
goto patch_fail;
|
|
}
|
|
|
|
ret_val = check_fw_version(xdata);
|
|
if (ret_val <= 0) {
|
|
RTKBT_ERR("%s: Read Local Version Info failure after download",
|
|
__func__);
|
|
ret_val = -1;
|
|
goto patch_fail;
|
|
}
|
|
|
|
ret_val = 0;
|
|
patch_fail:
|
|
kfree(fw_buf);
|
|
patch_end:
|
|
if (xdata != NULL) {
|
|
if (xdata->send_pkt)
|
|
kfree(xdata->send_pkt);
|
|
if (xdata->rcv_pkt)
|
|
kfree(xdata->rcv_pkt);
|
|
kfree(xdata);
|
|
}
|
|
RTKBT_DBG("Rtk patch end %d", ret_val);
|
|
return ret_val;
|
|
}
|
|
|
|
int set_btoff(struct usb_interface *intf)
|
|
{
|
|
dev_data *dev_entry;
|
|
xchange_data *xdata = NULL;
|
|
int ret_val;
|
|
|
|
RTKBT_DBG("set_btoff");
|
|
dev_entry = dev_data_find(intf);
|
|
if (NULL == dev_entry) {
|
|
return -1;
|
|
}
|
|
|
|
xdata = kzalloc(sizeof(xchange_data), GFP_KERNEL);
|
|
if (NULL == xdata) {
|
|
ret_val = -1;
|
|
RTKBT_DBG("NULL == xdata");
|
|
return ret_val;
|
|
}
|
|
|
|
init_xdata(xdata, dev_entry);
|
|
|
|
xdata->cmd_hdr->opcode = cpu_to_le16(BTOFF_OPCODE);
|
|
xdata->cmd_hdr->plen = 1;
|
|
xdata->pkt_len = CMD_HDR_LEN + 1;
|
|
xdata->send_pkt[CMD_HDR_LEN] = 1;
|
|
|
|
ret_val = send_hci_cmd(xdata);
|
|
if (ret_val < 0) {
|
|
goto tagEnd;
|
|
}
|
|
|
|
ret_val = rcv_hci_evt(xdata);
|
|
if (ret_val < 0) {
|
|
goto tagEnd;
|
|
}
|
|
|
|
tagEnd:
|
|
if (xdata != NULL) {
|
|
if (xdata->send_pkt)
|
|
kfree(xdata->send_pkt);
|
|
if (xdata->rcv_pkt)
|
|
kfree(xdata->rcv_pkt);
|
|
kfree(xdata);
|
|
}
|
|
|
|
RTKBT_DBG("set_btoff done");
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
dev_data *dev_data_find(struct usb_interface * intf)
|
|
{
|
|
dev_data *dev_entry;
|
|
|
|
list_for_each_entry(dev_entry, &dev_data_list, list_node) {
|
|
if (dev_entry->intf == intf) {
|
|
return dev_entry;
|
|
}
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
patch_info *get_patch_entry(struct usb_device * udev)
|
|
{
|
|
patch_info *patch_entry;
|
|
uint16_t pid;
|
|
|
|
patch_entry = fw_patch_table;
|
|
pid = le16_to_cpu(udev->descriptor.idProduct);
|
|
RTKBT_DBG("pid = 0x%x", pid);
|
|
while (pid != patch_entry->prod_id) {
|
|
if (0 == patch_entry->prod_id) {
|
|
RTKBT_DBG
|
|
("get_patch_entry =NULL, can not find device pid in patch_table");
|
|
return NULL; //break;
|
|
}
|
|
patch_entry++;
|
|
}
|
|
|
|
return patch_entry;
|
|
}
|
|
|
|
int rtkbt_pm_notify(struct notifier_block *notifier,
|
|
ulong pm_event, void *unused)
|
|
{
|
|
dev_data *dev_entry;
|
|
patch_info *patch_entry;
|
|
struct usb_device *udev;
|
|
/* int err; */
|
|
/* struct btusb_data *data; */
|
|
|
|
dev_entry = container_of(notifier, dev_data, pm_notifier);
|
|
/* data = usb_get_intfdata(dev_entry->intf); */
|
|
patch_entry = dev_entry->patch_entry;
|
|
udev = dev_entry->udev;
|
|
RTKBT_DBG("%s: pm_event %ld", __func__, pm_event);
|
|
switch (pm_event) {
|
|
case PM_SUSPEND_PREPARE:
|
|
case PM_HIBERNATION_PREPARE:
|
|
/* No need to load firmware because the download firmware
|
|
* process is deprecated in resume.
|
|
* We use rebind after resume instead */
|
|
/* err = usb_autopm_get_interface(data->intf);
|
|
* if (err < 0)
|
|
* return err;
|
|
* patch_entry->fw_len =
|
|
* load_firmware(dev_entry, &patch_entry->fw_cache);
|
|
* usb_autopm_put_interface(data->intf);
|
|
* if (patch_entry->fw_len <= 0) {
|
|
* RTKBT_DBG("rtkbt_pm_notify return NOTIFY_BAD");
|
|
* return NOTIFY_BAD;
|
|
* } */
|
|
|
|
RTKBT_DBG("%s: suspend prepare", __func__);
|
|
|
|
if (!device_may_wakeup(&udev->dev)) {
|
|
#if (CONFIG_NEEDS_BINDING)
|
|
dev_entry->intf->needs_binding = 1;
|
|
RTKBT_DBG("Remote wakeup not support, set "
|
|
"intf->needs_binding = 1");
|
|
#else
|
|
RTKBT_DBG("Remote wakeup not support, no needs binding");
|
|
#endif
|
|
}
|
|
break;
|
|
|
|
case PM_POST_SUSPEND:
|
|
case PM_POST_HIBERNATION:
|
|
case PM_POST_RESTORE:
|
|
/* if (patch_entry->fw_len > 0) {
|
|
* kfree(patch_entry->fw_cache);
|
|
* patch_entry->fw_cache = NULL;
|
|
* patch_entry->fw_len = 0;
|
|
* } */
|
|
#if BTUSB_RPM
|
|
RTKBT_DBG("%s: Re-enable autosuspend", __func__);
|
|
/* pm_runtime_use_autosuspend(&udev->dev);
|
|
* pm_runtime_set_autosuspend_delay(&udev->dev, 2000);
|
|
* pm_runtime_set_active(&udev->dev);
|
|
* pm_runtime_allow(&udev->dev);
|
|
* pm_runtime_mark_last_busy(&udev->dev);
|
|
* pm_runtime_autosuspend(&udev->dev);
|
|
* pm_runtime_put_autosuspend(&udev->dev);
|
|
* usb_disable_autosuspend(udev); */
|
|
/* FIXME: usb_enable_autosuspend(udev) is useless here.
|
|
* Because it is always enabled after enabled in btusb_probe()
|
|
*/
|
|
usb_enable_autosuspend(udev);
|
|
pm_runtime_mark_last_busy(&udev->dev);
|
|
#endif
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
int rtk_parse_config_file(unsigned char *config_buf, int *filelen,
|
|
char bt_addr[6])
|
|
{
|
|
struct rtk_bt_vendor_config *config =
|
|
(struct rtk_bt_vendor_config *)config_buf;
|
|
uint16_t config_len = 0, temp = 0;
|
|
struct rtk_bt_vendor_config_entry *entry = NULL;
|
|
unsigned int i = 0;
|
|
//int j = 0;
|
|
|
|
if (config == NULL)
|
|
return 0;
|
|
|
|
config_len = le16_to_cpu(config->data_len);
|
|
entry = config->entry;
|
|
|
|
if (le32_to_cpu(config->signature) != RTK_VENDOR_CONFIG_MAGIC) {
|
|
RTKBT_ERR
|
|
("config signature magic number(%x) is not set to RTK_VENDOR_CONFIG_MAGIC",
|
|
config->signature);
|
|
return 0;
|
|
}
|
|
|
|
if (config_len != *filelen - sizeof(struct rtk_bt_vendor_config)) {
|
|
RTKBT_ERR("config len(%d) is not right(%zd)", config_len,
|
|
*filelen - sizeof(struct rtk_bt_vendor_config));
|
|
return 0;
|
|
}
|
|
|
|
for (i = 0; i < config_len;) {
|
|
switch (le16_to_cpu(entry->offset)) {
|
|
#if 0
|
|
case 0x3c:
|
|
for (j = 0; j < entry->entry_len; j++)
|
|
entry->entry_data[j] =
|
|
bt_addr[entry->entry_len - 1 - j];
|
|
RTKBT_DBG("config has bdaddr");
|
|
break;
|
|
#endif
|
|
default:
|
|
RTKBT_DBG("config offset(%x),length(%x)", entry->offset,
|
|
entry->entry_len);
|
|
break;
|
|
}
|
|
temp =
|
|
entry->entry_len +
|
|
sizeof(struct rtk_bt_vendor_config_entry);
|
|
i += temp;
|
|
entry =
|
|
(struct rtk_bt_vendor_config_entry *)((uint8_t *) entry +
|
|
temp);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
uint8_t rtk_get_fw_project_id(uint8_t * p_buf)
|
|
{
|
|
uint8_t opcode;
|
|
uint8_t len;
|
|
uint8_t data = 0;
|
|
|
|
do {
|
|
opcode = *p_buf;
|
|
len = *(p_buf - 1);
|
|
if (opcode == 0x00) {
|
|
if (len == 1) {
|
|
data = *(p_buf - 2);
|
|
RTKBT_DBG
|
|
("rtk_get_fw_project_id: opcode %d, len %d, data %d",
|
|
opcode, len, data);
|
|
break;
|
|
} else {
|
|
RTKBT_ERR
|
|
("rtk_get_fw_project_id: invalid len %d",
|
|
len);
|
|
}
|
|
}
|
|
p_buf -= len + 2;
|
|
} while (*p_buf != 0xFF);
|
|
|
|
return data;
|
|
}
|
|
|
|
static void rtk_get_patch_entry(uint8_t * epatch_buf,
|
|
struct rtk_epatch_entry *entry)
|
|
{
|
|
uint32_t svn_ver;
|
|
uint32_t coex_ver;
|
|
uint32_t tmp;
|
|
uint16_t i;
|
|
struct rtk_epatch *epatch_info = (struct rtk_epatch *)epatch_buf;
|
|
|
|
epatch_info->number_of_total_patch =
|
|
le16_to_cpu(epatch_info->number_of_total_patch);
|
|
RTKBT_DBG("fw_version = 0x%x", le32_to_cpu(epatch_info->fw_version));
|
|
RTKBT_DBG("number_of_total_patch = %d",
|
|
epatch_info->number_of_total_patch);
|
|
|
|
/* get right epatch entry */
|
|
for (i = 0; i < epatch_info->number_of_total_patch; i++) {
|
|
if (get_unaligned_le16(epatch_buf + 14 + 2 * i) ==
|
|
gEVersion + 1) {
|
|
entry->chipID = gEVersion + 1;
|
|
entry->patch_length = get_unaligned_le16(epatch_buf +
|
|
14 +
|
|
2 * epatch_info->number_of_total_patch +
|
|
2 * i);
|
|
entry->start_offset = get_unaligned_le32(epatch_buf +
|
|
14 +
|
|
4 * epatch_info-> number_of_total_patch +
|
|
4 * i);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (i >= epatch_info->number_of_total_patch) {
|
|
entry->patch_length = 0;
|
|
entry->start_offset = 0;
|
|
RTKBT_ERR("No corresponding patch found\n");
|
|
return;
|
|
}
|
|
|
|
svn_ver = get_unaligned_le32(epatch_buf +
|
|
entry->start_offset +
|
|
entry->patch_length - 8);
|
|
coex_ver = get_unaligned_le32(epatch_buf +
|
|
entry->start_offset +
|
|
entry->patch_length - 12);
|
|
|
|
RTKBT_DBG("chipID %d", entry->chipID);
|
|
RTKBT_DBG("patch_length 0x%04x", entry->patch_length);
|
|
RTKBT_DBG("start_offset 0x%08x", entry->start_offset);
|
|
|
|
RTKBT_DBG("Svn version: %8d", svn_ver);
|
|
tmp = ((coex_ver >> 16) & 0x7ff) + (coex_ver >> 27) * 10000;
|
|
RTKBT_DBG("Coexistence: BTCOEX_20%06d-%04x",
|
|
tmp, (coex_ver & 0xffff));
|
|
}
|
|
|
|
int load_firmware(dev_data * dev_entry, uint8_t ** buff)
|
|
{
|
|
const struct firmware *fw;
|
|
struct usb_device *udev;
|
|
patch_info *patch_entry;
|
|
char *fw_name;
|
|
int fw_len = 0, ret_val = 0, config_len = 0, buf_len = -1;
|
|
uint8_t *buf = *buff, *config_file_buf = NULL, *epatch_buf = NULL;
|
|
uint8_t proj_id = 0;
|
|
uint8_t need_download_fw = 1;
|
|
uint16_t lmp_version;
|
|
struct rtk_epatch_entry current_entry = { 0 };
|
|
uint8_t vnd_local_bd_addr[6] = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06 };
|
|
|
|
RTKBT_DBG("load_firmware start");
|
|
udev = dev_entry->udev;
|
|
patch_entry = dev_entry->patch_entry;
|
|
lmp_version = patch_entry->lmp_sub;
|
|
RTKBT_DBG("lmp_version = 0x%04x", lmp_version);
|
|
|
|
fw_name = patch_entry->config_name;
|
|
RTKBT_DBG("config name is %s", fw_name);
|
|
|
|
ret_val = request_firmware(&fw, fw_name, &udev->dev);
|
|
if (ret_val < 0)
|
|
config_len = 0;
|
|
else {
|
|
config_file_buf = kzalloc(fw->size, GFP_KERNEL);
|
|
if (NULL == config_file_buf)
|
|
goto alloc_fail;
|
|
memcpy(config_file_buf, fw->data, fw->size);
|
|
config_len = fw->size;
|
|
rtk_parse_config_file(config_file_buf, &config_len,
|
|
vnd_local_bd_addr);
|
|
|
|
}
|
|
|
|
release_firmware(fw);
|
|
fw_name = patch_entry->patch_name;
|
|
RTKBT_DBG("fw name is %s", fw_name);
|
|
|
|
ret_val = request_firmware(&fw, fw_name, &udev->dev);
|
|
if (ret_val < 0) {
|
|
fw_len = 0;
|
|
kfree(config_file_buf);
|
|
config_file_buf = NULL;
|
|
goto fw_fail;
|
|
}
|
|
epatch_buf = kzalloc(fw->size, GFP_KERNEL);
|
|
if (NULL == epatch_buf)
|
|
goto alloc_fail;
|
|
|
|
memcpy(epatch_buf, fw->data, fw->size);
|
|
buf_len = fw->size + config_len;
|
|
|
|
if (lmp_version == ROM_LMP_8723a) {
|
|
RTKBT_DBG("This is 8723a, use old patch style!");
|
|
|
|
if (memcmp(epatch_buf, RTK_EPATCH_SIGNATURE, 8) == 0) {
|
|
RTKBT_ERR("8723a Check signature error!");
|
|
need_download_fw = 0;
|
|
} else {
|
|
if (!(buf = kzalloc(buf_len, GFP_KERNEL))) {
|
|
RTKBT_ERR("Can't alloc memory for fw&config");
|
|
buf_len = -1;
|
|
} else {
|
|
RTKBT_DBG("8723a, fw copy direct");
|
|
memcpy(buf, epatch_buf, fw->size);
|
|
if (config_len) {
|
|
memcpy(&buf[buf_len - config_len],
|
|
config_file_buf, config_len);
|
|
}
|
|
}
|
|
}
|
|
} else {
|
|
RTKBT_DBG("This is not 8723a, use new patch style!");
|
|
|
|
/* Get version from ROM */
|
|
gEVersion = rtk_get_eversion(dev_entry);
|
|
RTKBT_DBG("%s: New gEVersion %d", __func__, gEVersion);
|
|
if (gEVersion == 0xFE) {
|
|
RTKBT_ERR("%s: Read ROM version failure", __func__);
|
|
need_download_fw = 0;
|
|
fw_len = 0;
|
|
goto alloc_fail;
|
|
}
|
|
|
|
/* check Signature and Extension Section Field */
|
|
if ((memcmp(epatch_buf, RTK_EPATCH_SIGNATURE, 8) != 0) ||
|
|
memcmp(epatch_buf + buf_len - config_len - 4,
|
|
Extension_Section_SIGNATURE, 4) != 0) {
|
|
RTKBT_ERR("Check SIGNATURE error! do not download fw");
|
|
need_download_fw = 0;
|
|
} else {
|
|
proj_id =
|
|
rtk_get_fw_project_id(epatch_buf + buf_len -
|
|
config_len - 5);
|
|
|
|
if (lmp_version != project_id[proj_id]) {
|
|
RTKBT_ERR
|
|
("lmp_version is %x, project_id is %x, does not match!!!",
|
|
lmp_version, project_id[proj_id]);
|
|
need_download_fw = 0;
|
|
} else {
|
|
RTKBT_DBG
|
|
("lmp_version is %x, project_id is %x, match!",
|
|
lmp_version, project_id[proj_id]);
|
|
rtk_get_patch_entry(epatch_buf, ¤t_entry);
|
|
|
|
if (current_entry.patch_length == 0)
|
|
goto fw_fail;
|
|
|
|
buf_len =
|
|
current_entry.patch_length + config_len;
|
|
RTKBT_DBG("buf_len = 0x%x", buf_len);
|
|
|
|
if (!(buf = kzalloc(buf_len, GFP_KERNEL))) {
|
|
RTKBT_ERR
|
|
("Can't alloc memory for multi fw&config");
|
|
buf_len = -1;
|
|
} else {
|
|
memcpy(buf,
|
|
epatch_buf +
|
|
current_entry.start_offset,
|
|
current_entry.patch_length);
|
|
memcpy(buf + current_entry.patch_length - 4, epatch_buf + 8, 4); /*fw version */
|
|
if (config_len) {
|
|
memcpy(&buf
|
|
[buf_len - config_len],
|
|
config_file_buf,
|
|
config_len);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
RTKBT_DBG("fw:%s exists, config file:%s exists",
|
|
(buf_len > 0) ? "" : "not", (config_len > 0) ? "" : "not");
|
|
if (buf && (buf_len > 0) && (need_download_fw)) {
|
|
fw_len = buf_len;
|
|
*buff = buf;
|
|
}
|
|
|
|
RTKBT_DBG("load_firmware done");
|
|
|
|
alloc_fail:
|
|
release_firmware(fw);
|
|
|
|
if (epatch_buf)
|
|
kfree(epatch_buf);
|
|
|
|
if (config_file_buf)
|
|
kfree(config_file_buf);
|
|
fw_fail:
|
|
return fw_len;
|
|
}
|
|
|
|
void init_xdata(xchange_data * xdata, dev_data * dev_entry)
|
|
{
|
|
memset(xdata, 0, sizeof(xchange_data));
|
|
xdata->dev_entry = dev_entry;
|
|
xdata->pipe_in = usb_rcvintpipe(dev_entry->udev, INTR_EP);
|
|
xdata->pipe_out = usb_sndctrlpipe(dev_entry->udev, CTRL_EP);
|
|
xdata->send_pkt = kzalloc(PKT_LEN, GFP_KERNEL);
|
|
xdata->rcv_pkt = kzalloc(PKT_LEN, GFP_KERNEL);
|
|
xdata->cmd_hdr = (struct hci_command_hdr *)(xdata->send_pkt);
|
|
xdata->evt_hdr = (struct hci_event_hdr *)(xdata->rcv_pkt);
|
|
xdata->cmd_cmp =
|
|
(struct hci_ev_cmd_complete *)(xdata->rcv_pkt + EVT_HDR_LEN);
|
|
xdata->req_para = xdata->send_pkt + CMD_HDR_LEN;
|
|
xdata->rsp_para = xdata->rcv_pkt + EVT_HDR_LEN + CMD_CMP_LEN;
|
|
}
|
|
|
|
int check_fw_version(xchange_data * xdata)
|
|
{
|
|
struct hci_rp_read_local_version *read_ver_rsp;
|
|
patch_info *patch_entry;
|
|
int ret_val;
|
|
int retry = 0;
|
|
|
|
/* Ensure that the first cmd is hci reset after system suspend
|
|
* or system reboot */
|
|
send_reset_command(xdata);
|
|
|
|
get_ver:
|
|
xdata->cmd_hdr->opcode = cpu_to_le16(HCI_OP_READ_LOCAL_VERSION);
|
|
xdata->cmd_hdr->plen = 0;
|
|
xdata->pkt_len = CMD_HDR_LEN;
|
|
|
|
ret_val = send_hci_cmd(xdata);
|
|
if (ret_val < 0) {
|
|
RTKBT_ERR("%s: Failed to send HCI command.", __func__);
|
|
goto version_end;
|
|
}
|
|
|
|
ret_val = rcv_hci_evt(xdata);
|
|
if (ret_val < 0) {
|
|
RTKBT_ERR("%s: Failed to receive HCI event.", __func__);
|
|
goto version_end;
|
|
}
|
|
|
|
patch_entry = xdata->dev_entry->patch_entry;
|
|
read_ver_rsp = (struct hci_rp_read_local_version *)(xdata->rsp_para);
|
|
read_ver_rsp->lmp_subver = le16_to_cpu(read_ver_rsp->lmp_subver);
|
|
read_ver_rsp->hci_rev = le16_to_cpu(read_ver_rsp->hci_rev);
|
|
read_ver_rsp->manufacturer = le16_to_cpu(read_ver_rsp->manufacturer);
|
|
|
|
RTKBT_DBG("read_ver_rsp->lmp_subver = 0x%x", read_ver_rsp->lmp_subver);
|
|
RTKBT_DBG("patch_entry->lmp_sub = 0x%x", patch_entry->lmp_sub);
|
|
if (patch_entry->lmp_sub != read_ver_rsp->lmp_subver) {
|
|
return 1;
|
|
}
|
|
|
|
ret_val = 0;
|
|
version_end:
|
|
if (ret_val) {
|
|
send_reset_command(xdata);
|
|
retry++;
|
|
if (retry < 2)
|
|
goto get_ver;
|
|
}
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
uint8_t rtk_get_eversion(dev_data * dev_entry)
|
|
{
|
|
struct rtk_eversion_evt *eversion;
|
|
patch_info *patch_entry;
|
|
int ret_val = 0;
|
|
xchange_data *xdata = NULL;
|
|
|
|
RTKBT_DBG("%s: gEVersion %d", __func__, gEVersion);
|
|
if (gEVersion != 0xFF && gEVersion != 0xFE) {
|
|
RTKBT_DBG("gEVersion != 0xFF, return it directly!");
|
|
return gEVersion;
|
|
}
|
|
|
|
xdata = kzalloc(sizeof(xchange_data), GFP_KERNEL);
|
|
if (NULL == xdata) {
|
|
ret_val = 0xFE;
|
|
RTKBT_DBG("NULL == xdata");
|
|
return ret_val;
|
|
}
|
|
|
|
init_xdata(xdata, dev_entry);
|
|
|
|
xdata->cmd_hdr->opcode = cpu_to_le16(HCI_VENDOR_READ_RTK_ROM_VERISION);
|
|
xdata->cmd_hdr->plen = 0;
|
|
xdata->pkt_len = CMD_HDR_LEN;
|
|
|
|
ret_val = send_hci_cmd(xdata);
|
|
if (ret_val < 0) {
|
|
RTKBT_ERR("Failed to send read RTK rom version cmd.");
|
|
ret_val = 0xFE;
|
|
goto version_end;
|
|
}
|
|
|
|
ret_val = rcv_hci_evt(xdata);
|
|
if (ret_val < 0) {
|
|
RTKBT_ERR("Failed to receive HCI event for rom version.");
|
|
ret_val = 0xFE;
|
|
goto version_end;
|
|
}
|
|
|
|
patch_entry = xdata->dev_entry->patch_entry;
|
|
eversion = (struct rtk_eversion_evt *)(xdata->rsp_para);
|
|
RTKBT_DBG("eversion->status = 0x%x, eversion->version = 0x%x",
|
|
eversion->status, eversion->version);
|
|
if (eversion->status) {
|
|
ret_val = 0;
|
|
//global_eversion = 0;
|
|
} else {
|
|
ret_val = eversion->version;
|
|
//global_eversion = eversion->version;
|
|
}
|
|
|
|
version_end:
|
|
if (xdata != NULL) {
|
|
if (xdata->send_pkt)
|
|
kfree(xdata->send_pkt);
|
|
if (xdata->rcv_pkt)
|
|
kfree(xdata->rcv_pkt);
|
|
kfree(xdata);
|
|
}
|
|
return ret_val;
|
|
}
|
|
|
|
int download_data(xchange_data * xdata)
|
|
{
|
|
download_cp *cmd_para;
|
|
download_rp *evt_para;
|
|
uint8_t *pcur;
|
|
int pkt_len, frag_num, frag_len;
|
|
int i, ret_val;
|
|
|
|
RTKBT_DBG("download_data start");
|
|
|
|
cmd_para = (download_cp *) xdata->req_para;
|
|
evt_para = (download_rp *) xdata->rsp_para;
|
|
pcur = xdata->fw_data;
|
|
pkt_len = CMD_HDR_LEN + sizeof(download_cp);
|
|
frag_num = xdata->fw_len / PATCH_SEG_MAX + 1;
|
|
frag_len = PATCH_SEG_MAX;
|
|
|
|
for (i = 0; i < frag_num; i++) {
|
|
cmd_para->index = i;
|
|
if (i == (frag_num - 1)) {
|
|
cmd_para->index |= DATA_END;
|
|
frag_len = xdata->fw_len % PATCH_SEG_MAX;
|
|
pkt_len -= (PATCH_SEG_MAX - frag_len);
|
|
}
|
|
xdata->cmd_hdr->opcode = cpu_to_le16(DOWNLOAD_OPCODE);
|
|
xdata->cmd_hdr->plen = sizeof(uint8_t) + frag_len;
|
|
xdata->pkt_len = pkt_len;
|
|
memcpy(cmd_para->data, pcur, frag_len);
|
|
|
|
ret_val = send_hci_cmd(xdata);
|
|
if (ret_val < 0) {
|
|
return ret_val;
|
|
}
|
|
|
|
ret_val = rcv_hci_evt(xdata);
|
|
if (ret_val < 0) {
|
|
return ret_val;
|
|
}
|
|
|
|
if (0 != evt_para->status) {
|
|
return -1;
|
|
}
|
|
|
|
pcur += PATCH_SEG_MAX;
|
|
}
|
|
|
|
RTKBT_DBG("download_data done");
|
|
return xdata->fw_len;
|
|
}
|
|
|
|
int send_hci_cmd(xchange_data * xdata)
|
|
{
|
|
int ret_val;
|
|
|
|
ret_val = usb_control_msg(xdata->dev_entry->udev, xdata->pipe_out,
|
|
0, USB_TYPE_CLASS, 0, 0,
|
|
(void *)(xdata->send_pkt),
|
|
xdata->pkt_len, MSG_TO);
|
|
|
|
if (ret_val < 0)
|
|
RTKBT_ERR("%s; failed to send ctl msg for hci cmd, err %d",
|
|
__func__, ret_val);
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
int rcv_hci_evt(xchange_data * xdata)
|
|
{
|
|
int ret_len = 0, ret_val = 0;
|
|
int i; // Added by Realtek
|
|
|
|
while (1) {
|
|
// **************************** Modifed by Realtek (begin)
|
|
for (i = 0; i < 5; i++) // Try to send USB interrupt message 5 times.
|
|
{
|
|
ret_val =
|
|
usb_interrupt_msg(xdata->dev_entry->udev,
|
|
xdata->pipe_in,
|
|
(void *)(xdata->rcv_pkt), PKT_LEN,
|
|
&ret_len, MSG_TO);
|
|
if (ret_val >= 0)
|
|
break;
|
|
}
|
|
// **************************** Modifed by Realtek (end)
|
|
|
|
if (ret_val < 0) {
|
|
RTKBT_ERR("%s; no usb intr msg for hci event, err %d",
|
|
__func__, ret_val);
|
|
return ret_val;
|
|
}
|
|
|
|
if (CMD_CMP_EVT == xdata->evt_hdr->evt) {
|
|
if (xdata->cmd_hdr->opcode == xdata->cmd_cmp->opcode)
|
|
return ret_len;
|
|
}
|
|
}
|
|
}
|
|
|
|
void print_acl(struct sk_buff *skb, int dataOut)
|
|
{
|
|
#if PRINT_ACL_DATA
|
|
uint wlength = skb->len;
|
|
uint icount = 0;
|
|
u16 *handle = (u16 *) (skb->data);
|
|
u16 dataLen = *(handle + 1);
|
|
u8 *acl_data = (u8 *) (skb->data);
|
|
//if (0==dataOut)
|
|
printk("%d handle:%04x,len:%d,", dataOut, *handle, dataLen);
|
|
//else
|
|
// printk("In handle:%04x,len:%d,",*handle,dataLen);
|
|
/* for(icount=4;(icount<wlength)&&(icount<32);icount++)
|
|
{
|
|
printk("%02x ",*(acl_data+icount) );
|
|
}
|
|
printk("\n");
|
|
*/
|
|
#endif
|
|
}
|
|
|
|
void print_command(struct sk_buff *skb)
|
|
{
|
|
#if PRINT_CMD_EVENT
|
|
uint wlength = skb->len;
|
|
uint icount = 0;
|
|
u16 *opcode = (u16 *) (skb->data);
|
|
u8 *cmd_data = (u8 *) (skb->data);
|
|
u8 paramLen = *(cmd_data + 2);
|
|
|
|
switch (*opcode) {
|
|
case HCI_OP_INQUIRY:
|
|
printk("HCI_OP_INQUIRY");
|
|
break;
|
|
case HCI_OP_INQUIRY_CANCEL:
|
|
printk("HCI_OP_INQUIRY_CANCEL");
|
|
break;
|
|
case HCI_OP_EXIT_PERIODIC_INQ:
|
|
printk("HCI_OP_EXIT_PERIODIC_INQ");
|
|
break;
|
|
case HCI_OP_CREATE_CONN:
|
|
printk("HCI_OP_CREATE_CONN");
|
|
break;
|
|
case HCI_OP_DISCONNECT:
|
|
printk("HCI_OP_DISCONNECT");
|
|
break;
|
|
case HCI_OP_CREATE_CONN_CANCEL:
|
|
printk("HCI_OP_CREATE_CONN_CANCEL");
|
|
break;
|
|
case HCI_OP_ACCEPT_CONN_REQ:
|
|
printk("HCI_OP_ACCEPT_CONN_REQ");
|
|
break;
|
|
case HCI_OP_REJECT_CONN_REQ:
|
|
printk("HCI_OP_REJECT_CONN_REQ");
|
|
break;
|
|
case HCI_OP_AUTH_REQUESTED:
|
|
printk("HCI_OP_AUTH_REQUESTED");
|
|
break;
|
|
case HCI_OP_SET_CONN_ENCRYPT:
|
|
printk("HCI_OP_SET_CONN_ENCRYPT");
|
|
break;
|
|
case HCI_OP_REMOTE_NAME_REQ:
|
|
printk("HCI_OP_REMOTE_NAME_REQ");
|
|
break;
|
|
case HCI_OP_READ_REMOTE_FEATURES:
|
|
printk("HCI_OP_READ_REMOTE_FEATURES");
|
|
break;
|
|
case HCI_OP_SNIFF_MODE:
|
|
printk("HCI_OP_SNIFF_MODE");
|
|
break;
|
|
case HCI_OP_EXIT_SNIFF_MODE:
|
|
printk("HCI_OP_EXIT_SNIFF_MODE");
|
|
break;
|
|
case HCI_OP_SWITCH_ROLE:
|
|
printk("HCI_OP_SWITCH_ROLE");
|
|
break;
|
|
case HCI_OP_SNIFF_SUBRATE:
|
|
printk("HCI_OP_SNIFF_SUBRATE");
|
|
break;
|
|
case HCI_OP_RESET:
|
|
printk("HCI_OP_RESET");
|
|
break;
|
|
default:
|
|
printk("CMD");
|
|
break;
|
|
}
|
|
printk(":%04x,len:%d,", *opcode, paramLen);
|
|
for (icount = 3; (icount < wlength) && (icount < 24); icount++) {
|
|
printk("%02x ", *(cmd_data + icount));
|
|
}
|
|
printk("\n");
|
|
|
|
#endif
|
|
}
|
|
|
|
void print_event(struct sk_buff *skb)
|
|
{
|
|
#if PRINT_CMD_EVENT
|
|
uint wlength = skb->len;
|
|
uint icount = 0;
|
|
u8 *opcode = (u8 *) (skb->data);
|
|
u8 paramLen = *(opcode + 1);
|
|
|
|
switch (*opcode) {
|
|
case HCI_EV_INQUIRY_COMPLETE:
|
|
printk("HCI_EV_INQUIRY_COMPLETE");
|
|
break;
|
|
case HCI_EV_INQUIRY_RESULT:
|
|
printk("HCI_EV_INQUIRY_RESULT");
|
|
break;
|
|
case HCI_EV_CONN_COMPLETE:
|
|
printk("HCI_EV_CONN_COMPLETE");
|
|
break;
|
|
case HCI_EV_CONN_REQUEST:
|
|
printk("HCI_EV_CONN_REQUEST");
|
|
break;
|
|
case HCI_EV_DISCONN_COMPLETE:
|
|
printk("HCI_EV_DISCONN_COMPLETE");
|
|
break;
|
|
case HCI_EV_AUTH_COMPLETE:
|
|
printk("HCI_EV_AUTH_COMPLETE");
|
|
break;
|
|
case HCI_EV_REMOTE_NAME:
|
|
printk("HCI_EV_REMOTE_NAME");
|
|
break;
|
|
case HCI_EV_ENCRYPT_CHANGE:
|
|
printk("HCI_EV_ENCRYPT_CHANGE");
|
|
break;
|
|
case HCI_EV_CHANGE_LINK_KEY_COMPLETE:
|
|
printk("HCI_EV_CHANGE_LINK_KEY_COMPLETE");
|
|
break;
|
|
case HCI_EV_REMOTE_FEATURES:
|
|
printk("HCI_EV_REMOTE_FEATURES");
|
|
break;
|
|
case HCI_EV_REMOTE_VERSION:
|
|
printk("HCI_EV_REMOTE_VERSION");
|
|
break;
|
|
case HCI_EV_QOS_SETUP_COMPLETE:
|
|
printk("HCI_EV_QOS_SETUP_COMPLETE");
|
|
break;
|
|
case HCI_EV_CMD_COMPLETE:
|
|
printk("HCI_EV_CMD_COMPLETE");
|
|
break;
|
|
case HCI_EV_CMD_STATUS:
|
|
printk("HCI_EV_CMD_STATUS");
|
|
break;
|
|
case HCI_EV_ROLE_CHANGE:
|
|
printk("HCI_EV_ROLE_CHANGE");
|
|
break;
|
|
case HCI_EV_NUM_COMP_PKTS:
|
|
printk("HCI_EV_NUM_COMP_PKTS");
|
|
break;
|
|
case HCI_EV_MODE_CHANGE:
|
|
printk("HCI_EV_MODE_CHANGE");
|
|
break;
|
|
case HCI_EV_PIN_CODE_REQ:
|
|
printk("HCI_EV_PIN_CODE_REQ");
|
|
break;
|
|
case HCI_EV_LINK_KEY_REQ:
|
|
printk("HCI_EV_LINK_KEY_REQ");
|
|
break;
|
|
case HCI_EV_LINK_KEY_NOTIFY:
|
|
printk("HCI_EV_LINK_KEY_NOTIFY");
|
|
break;
|
|
case HCI_EV_CLOCK_OFFSET:
|
|
printk("HCI_EV_CLOCK_OFFSET");
|
|
break;
|
|
case HCI_EV_PKT_TYPE_CHANGE:
|
|
printk("HCI_EV_PKT_TYPE_CHANGE");
|
|
break;
|
|
case HCI_EV_PSCAN_REP_MODE:
|
|
printk("HCI_EV_PSCAN_REP_MODE");
|
|
break;
|
|
case HCI_EV_INQUIRY_RESULT_WITH_RSSI:
|
|
printk("HCI_EV_INQUIRY_RESULT_WITH_RSSI");
|
|
break;
|
|
case HCI_EV_REMOTE_EXT_FEATURES:
|
|
printk("HCI_EV_REMOTE_EXT_FEATURES");
|
|
break;
|
|
case HCI_EV_SYNC_CONN_COMPLETE:
|
|
printk("HCI_EV_SYNC_CONN_COMPLETE");
|
|
break;
|
|
case HCI_EV_SYNC_CONN_CHANGED:
|
|
printk("HCI_EV_SYNC_CONN_CHANGED");
|
|
break;
|
|
case HCI_EV_SNIFF_SUBRATE:
|
|
printk("HCI_EV_SNIFF_SUBRATE");
|
|
break;
|
|
case HCI_EV_EXTENDED_INQUIRY_RESULT:
|
|
printk("HCI_EV_EXTENDED_INQUIRY_RESULT");
|
|
break;
|
|
case HCI_EV_IO_CAPA_REQUEST:
|
|
printk("HCI_EV_IO_CAPA_REQUEST");
|
|
break;
|
|
case HCI_EV_SIMPLE_PAIR_COMPLETE:
|
|
printk("HCI_EV_SIMPLE_PAIR_COMPLETE");
|
|
break;
|
|
case HCI_EV_REMOTE_HOST_FEATURES:
|
|
printk("HCI_EV_REMOTE_HOST_FEATURES");
|
|
break;
|
|
default:
|
|
printk("event");
|
|
break;
|
|
}
|
|
printk(":%02x,len:%d,", *opcode, paramLen);
|
|
for (icount = 2; (icount < wlength) && (icount < 24); icount++) {
|
|
printk("%02x ", *(opcode + icount));
|
|
}
|
|
printk("\n");
|
|
|
|
#endif
|
|
}
|