串口和中断写完

App/Voilet.c

@@ -1,7 +1,6 @@
 //
 // Created by anonymous on 2026/5/24.
 //
-#include "Bsp.h"
 #include "Voilet.h"
 
 // LED灯数组
@@ -25,7 +24,8 @@ const GPIO_CONFIG DO_PERIPH[] = {
 #endif
 //串口配置表
 const COM_CONFIG COM_PERIPH[] = {
-    {COM1,.TxPort = GPIO2, .TxMode = GPIO_Mode_AF_PP,.RxPort = GPIO3, .RxMode = GPIO_Mode_IPU,.Speed = GPIO_Speed_50MHz},
+    {COM0,.TxPort = GPIO9, .RxPort =GPIO10, .Speed = GPIO_Speed_50MHz},
+    {COM1,.TxPort = GPIO2, .RxPort = GPIO3, .Speed = GPIO_Speed_50MHz},
 };
 
 void BspExtraInit(void);
@@ -41,17 +41,15 @@ void VoiletBspInit(void) {
 
     INTERRUPT_DISABLE
 
+    //初始化中断系统
+    IrqInit();
+
     //初始化延时库
     DelayConfig();
 
-    //关闭所有外设时钟
-    AllPeriphClockDisable();
-
     //LED灯配置
 #if (LED_NUM != 0)
-    for (i = 0;i < LED_NUM;i++) {
-        //打开外设时钟
-        GpioClockEnable(&LED_PERIPH[i].GpioX);
+    for (i = 0;i < ARRAY_LEN(LED_PERIPH);i++) {
         //配置GPIO口
         GpioConfig(&LED_PERIPH[i].GpioX, LED_PERIPH[i].Mode, LED_PERIPH[i].Speed);
     }
@@ -79,9 +77,8 @@ void VoiletBspInit(void) {
 
     //串口配置
     for (i = 0;i < ARRAY_LEN(COM_PERIPH);i++) {
-        UartClockEnable(&COM_PERIPH[i].ComX);
-        GpioConfig(&COM_PERIPH[i].TxPort, COM_PERIPH[i].TxMode, COM_PERIPH[i].Speed);
-        GpioConfig(&COM_PERIPH[i].TxPort, COM_PERIPH[i].RxMode, COM_PERIPH[i].Speed);
+        GpioConfig(&COM_PERIPH[i].TxPort, GPIO_Mode_AF_PP, COM_PERIPH[i].Speed);
+        GpioConfig(&COM_PERIPH[i].RxPort, GPIO_Mode_IPU, COM_PERIPH[i].Speed);
     }
 
     INTERRUPT_ENABLE
@@ -99,7 +96,7 @@ void BspExtraInit(void)
 {
     //LetterShell初始化
 #ifdef USE_SHELL
-    // LetterShellInit(TTY_COM,TTY_BAUD);
+    LetterShellInit(TTY_COM,TTY_BAUD);
 #endif
 }
 

App/Voilet.h

@@ -5,6 +5,8 @@
 #ifndef VOILET_H
 #define VOILET_H
 
+#include "Bsp.h"
+
 #define LED_NUM 2       //LED灯数量
 #if (LED_NUM != 0)
     #define LED0    0
@@ -19,8 +21,8 @@
 #if (DO_NUM != 0)
 #endif
 
-#define USE_SHELL       //系统使用Shell
 #define TTY_COM COM1
+#define TTY_BAUD 115200
 
 typedef struct {
     GPIO_MAP_T GpioX;
@@ -29,11 +31,9 @@ typedef struct {
 }GPIO_CONFIG;
 
 typedef struct {
-    COM_MAP_T ComX;
+    COM_MAP_T *ComX;
     GPIO_MAP_T TxPort;
-    GPIOMode_TypeDef TxMode;
     GPIO_MAP_T RxPort;
-    GPIOMode_TypeDef RxMode;
     GPIOSpeed_TypeDef Speed;
 }COM_CONFIG;
 

App/main.c

@@ -6,14 +6,12 @@
 #include <stdint.h>
 /* BSP文件 */
 #include "main.h"
-#include "Bsp.h"
+#include "Voilet.h"
 
 int main(void) {
 
     VoiletBspInit();
 
-    UartStdConfig((COM_MAP_T)COM1,9600);
-
     while (1) {
         LedToggle(LED0);
         DelayMs(100);